17--SHUTTLE ASSEMBLY
Key Dates
Due Date
-
Posted Date
-
Agency & Value
Agency
DLA AVIATION AT PHILADELPHIA, PA
Contract Value
Not provided
Codes & Classification
Solicitation Number
SPRPA126RYC85
NAICS
336413 - Other Aircraft Parts and Auxiliary Equipment Manufacturing
Classification Code
1720
Additional Details
Documents1
The Defense Logistics Agency (DLA) Aviation at Philadelphia, PA, on behalf of the Department of Defense, has issued a solicitation for the procurement of Shuttle Assemblies, classified under NAICS code 336413 (Other Aircraft Parts and Auxiliary Equipment Manufacturing) and Product Service Code 1720. This requirement is designated as a new spares acquisition and is critical to the launch and recovery systems of naval aircraft, specifically supporting shipboard operations where failure could result in severe personnel injury, loss of life, or loss of vital shipboard systems and aircraft.
**Purpose and Scope**
The procurement seeks to acquire 30 Shuttle Assemblies (P/N 622559-4, Revision K), with the quantity reduced from an initial 50 units. These assemblies are flight-critical components, requiring rigorous engineering source approval by the Naval Air Systems Command (NAVAIR). Only companies with prior approval or those submitting a comprehensive Source Approval Request (SAR) by the solicitation closing date will be eligible for award. The assemblies are integral to Aircraft Launch and Recovery Equipment (ALRE) and are classified as Critical Safety Items (CSI), invoking special control procedures and quality assurance requirements.
**Key Requirements and Objectives**
- **Source Approval:** Only previously approved sources or those submitting a SAR with detailed documentation (configuration drawings, process sheets, purchase orders, comparative analysis, inspection method sheets) will be considered.
- **Authorized Distributors:** Distributors must provide an unredacted OEM Distributor Letter authorizing resale of the exact part number at the time of proposal submission.
- **Quality Assurance:** Compliance with ISO 9001 or equivalent is mandatory. The contract includes higher-level quality requirements, fixed-price inspection, and a 12-month warranty post-delivery.
- **First Article Testing (FAT):** Government testing is required for one uncoated sample, with evaluation completed within 45 working days. Waiver of FAT may be granted to offerors who have delivered identical items within the past three years from the same facility, with appropriate certification.
- **In-Process and Final Inspections:** Contractors must notify NAWC Lakehurst QA and the PCO at least 14 days prior to inspections, allowing government representatives to witness both interim and final inspections. In-process inspections focus on critical features and manufacturing processes.
- **Traceability and Marking:** Contractors must develop a system for non-permanent identification of individual piece parts for traceability, with markings in accordance with MIL-STD-130 and Material Identification Code (MIC) for certified ALRE CSI parts.
- **Testing and Certification:** All non-destructive testing (NDT) must be performed by NADCAP-accredited or ISO 17025-accredited laboratories. Required tests include magnetic particle, penetrant, surface inspections, and hardness testing, among others.
- **Manufacturing Processes:** Critical processes such as heat treatment, welding, forging, and material processing requirements (MPR) apply. Contractors are responsible for all manufacturing aids and must demonstrate compliance with referenced standards (e.g., IPC/EIAJ-STD-001C, MIL-STD-454).
- **Documentation:** Extensive data requirements include inspection and certification records, heat treat and material property reports, welding procedures and qualifications, and evidence of welder performance and maintenance of qualification. All records must be maintained for seven years and provided to the ALRE Cognizant Technical Authority.
- **Packaging:** MIL-STD-2073 packaging standards apply.
**Contracting Entity and Contact Information**
- **Contracting Office:** DLA Aviation at Philadelphia, PA (Office Key: 500044424)
- **Department:** Department of Defense
- **Agency:** Defense Logistics Agency
- **Primary Contact:** Thomas Kuhnle, Telephone: 215-737-4024, Email: [email protected]
- **Location:** Joint Base MDL, NJ 08733-5000 (NAWC Lakehurst QA and NAVAIR codes provided for inspection and certification correspondence)
**Procurement Type and Special Considerations**
- **Solicitation Type:** Fixed-price contract under Emergency Acquisition Flexibilities (EAF), formerly Special Emergency Procurement Authority (SEPA).
- **Set-Aside:** Total Small Business Set-Aside, restricting competition to qualified small businesses.
- **Critical Safety Item:** DFARS clause 252.209-7010 applies, with additional DLAD and DFARS clauses incorporated by reference.
- **Submission Requirements:** Proposals must be submitted electronically in .pdf format, with all supporting documentation included.
**Constant Elements Throughout Contract Lifecycle**
- The critical safety nature of the Shuttle Assembly and its role in shipboard aircraft launch/recovery systems.
- Mandatory compliance with quality assurance, inspection, and certification requirements.
- Source approval and traceability protocols.
- Rigorous documentation and record-keeping standards.
- Engagement with NAWC Lakehurst QA for inspections and certifications.
- Adherence to packaging, marking, and manufacturing process standards.
**Summary for Contractors**
This opportunity is highly specialized, requiring proven experience in manufacturing flight-critical aircraft components, robust quality management systems, and the ability to meet stringent government inspection and certification requirements. Contractors must be prepared to support comprehensive in-process and final inspections, maintain detailed records, and ensure traceability of all parts. Only authorized OEM distributors or engineering-approved manufacturers will be considered. The solicitation is active, with a response deadline of March 12, 2026, and all relevant details and attachments are available via SAM.gov (Opportunity ID: cfd31b2283c64a6da95a2eb34cbcc3f8).
Contractors with the requisite technical capabilities, quality certifications, and experience in critical safety item production are encouraged to review the solicitation in detail and ensure all documentation and approvals are in place prior to submission.