Security fence at Coast Guard Air Station Clearwater Florida
Key Dates
Due Date
-
Posted Date
-
Agency & Value
Agency
BASE MIAMI(00028)
Contract Value
Not provided
Codes & Classification
Solicitation Number
70Z02826Q0000102
NAICS
238990 - All Other Specialty Trade Contractors
Classification Code
5660
Additional Details
The U.S. Coast Guard, under the Department of Homeland Security, has issued a combined synopsis/solicitation (Solicitation No. 70Z02826Q0000102) for the construction and installation of a security fence at Coast Guard Air Station Clearwater, located at 15100 Rescue Way, Clearwater, Florida 33762. This procurement is a firm fixed-price construction contract, set aside exclusively for small businesses under NAICS code 238990 (All Other Specialty Trade Contractors), with a size standard of $19.0 million. The applicable Product Service Code is 5660.
**Purpose and Scope**
The primary objective of this project is to enhance the physical security of the Air Station by removing and replacing existing fencing and installing new security features. The contractor will be responsible for the demolition and removal of approximately 400 feet of existing fence, including posts and concrete (which must be backfilled), and the installation of approximately 270 feet of new industrial-grade chain-link fencing. The new fencing will include security enhancements such as barbed wire and concertina wire in specified sections, as well as the installation of both powered and non-powered gates with access control and surveillance features.
**Key Requirements and Deliverables**
- **Fencing:** Installation of approximately 270 feet of new chain-link security fence. Sections A and B will match the existing 6-foot height, while Section C (the back fence) will be 8 feet tall. Security topping will include three strands of barbed wire, with concertina wire required on Sections A and B.
- **Gates:**
- Gate A: Replacement of a double mechanical gate with a 26-foot powered sliding gate, equipped with two standalone PIN-based keypads (entry and exit, each capable of storing at least 250 user codes) and a security camera with motion detection and memory card capability. No specific camera brand or model is mandated.
- Gate C: Installation of a 72-inch wide swing gate (minimum 60-inch opening) with a mechanical cipher lock, designed to accommodate commercial lawn mower access.
- **Electrical Work:** Contractor must provide all labor, materials, and equipment necessary to run electrical power (220V/120V, 1 phase, 3 wire, 125 amps, 6 circuits) from the panel to the powered gate operator, including trenching, conduit, conductors, and associated components. The Coast Guard will upgrade the existing knife switch to a NEMA 4 breaker panel.
- **Access Control and Surveillance:** Standalone security camera (or integrated with keypad) for Gate A, with no requirement for integration into existing government systems. No camera is required for Gate C.
- **Demolition:** Complete removal of existing fence, posts, and concrete, with backfilling as necessary.
- **Integration and Testing:** The completed system must be fully integrated, tested, and operational. The prime contractor may subcontract portions of the work (e.g., fencing/gate and electrical/security) provided the final system meets all requirements.
- **Compliance:** All work must comply with manufacturer specifications and applicable federal, state, and local regulations. Domestic content requirements (Buy American, Buy America, or others) apply as specified in the solicitation and contract clauses.
- **Labor Standards:** Compliance with Construction Wage Rate Requirements (Wage Determination FL20260266, dated 05/18/2026) is mandatory, including flow-down to all subcontractors.
- **Work Hours:** Monday through Friday, 8:00 a.m. to 3:00 p.m.; no work on weekends or holidays.
**Proposal Submission and Evaluation**
- **Submission Deadline:** Quotes must be received by 3:00 p.m. on August 14, 2026, via email to [email protected]. Telephone submissions are not accepted.
- **Required Documentation:** Quotes should be submitted on company letterhead and must include a technical proposal outlining the plan to perform the work, identification of any subcontractors (with relevant past performance), company tax ID, and UEI number. Vendors must be registered and active in SAM (System for Award Management) with the appropriate NAICS code.
- **Evaluation Criteria:** Award will be made to the lowest-priced, technically acceptable offeror. The anticipated award date is approximately August 28, 2026, with work to commence no later than 10 business days after award and to be completed within 30 days.
- **Site Visit:** A site visit is highly recommended and was scheduled for July 29th at 10:30 a.m. Coordination with unit POCs (CWO Joe Calderon or MKC Mike Hemmingway) is required for access.
**Contracting Entity and Contacts**
- **Contracting Office:** BASE MIAMI (00028), US Coast Guard, Department of Homeland Security
- **Primary Contact:** Jerry Lopez, [email protected], 571-607-2753
- **Secondary Contacts:**
- Jose A. Calderon, [email protected], 727-423-7586
- MKC Mike Hemmingway, [email protected], 727-535-1437 x1573
**Special Considerations**
- **Set-Aside:** This opportunity is restricted to small businesses.
- **Subcontracting:** The prime contractor may divide work between specialty subcontractors, provided the final system is fully integrated and operational.
- **Permits and Engineering:** No local permits, stamped shop drawings, wind-load calculations, engineered gate foundations, concrete testing, or third-party inspections are required.
- **Signage:** No new signage is required as part of this scope.
- **As-Built Survey:** No signed and sealed as-built survey is required post-construction.
**Applicable Clauses**
The solicitation incorporates relevant FAR and HSAR clauses, including but not limited to:
- FAR 52.222-90 (DEI Discrimination)
- FAR 52.236 series (Construction-specific requirements)
- FAR 52.222-6 and 52.222-11 (Wage Rate and Labor Standards)
- FAR 52.219-14 (Limitations on Subcontracting)
- FAR 52.232-5 (Payments under Fixed-Price Construction)
- FAR 52.249-10 (Default)
- HSAR 3052.209-70 (Prohibition on Contracts with Corporate Expatriates)
- HSAR 3052.237-72 (COTR)
**Constant Elements Over Contract Lifecycle**
- The project location and scope (security fencing and gates at USCG Air Station Clearwater)
- The requirement for compliance with federal construction, labor, and socioeconomic regulations
- The small business set-aside and NAICS code applicability
- The need for full integration and operational testing of all installed systems
- The requirement for domestic content compliance and proper documentation
- The fixed work schedule and completion timeline
This opportunity is well-suited for small business contractors with experience in security fencing, gate automation, access control, and related electrical work, who can deliver a fully integrated and compliant solution within a tight schedule. Interested parties should review the full solicitation and amendments on SAM.gov (Opportunity ID: 677ae93f828444399e83e07fff466619) and ensure all proposal requirements are met by the submission deadline.
Documents8