CONTROL ASSEMBLY,PU

Key Dates
Due Date

-

Posted Date

-

Agency & Value
Agency

NAVSUP WEAPON SYSTEMS SUPPORT MECH

Contract Value

Not provided

Codes & Classification
Solicitation Number

N0010426QFE87

NAICS

333613 - Mechanical Power Transmission Equipment Manufacturing

Classification Code

3040

Additional Details
Set Aside

None

Place of Performance

-

SourceSAM
The Department of the Navy, through NAVSUP Weapon Systems Support Mechanicsburg (NAVSUP WSS MECH), has issued a solicitation (Procurement Identifier: N0010426QFE87) for the supply of a CONTROL ASSEMBLY,PU, specifically a cable assembly manufactured in accordance with NAVSEA drawing 5486641, Item 201, Part Number C-1SD/K-NC1004. This procurement is classified under NAICS Code 333613 (Mechanical Power Transmission Equipment Manufacturing) and Product Service Code 3040, indicating its relevance to mechanical power transmission equipment. **Purpose and Scope** The cable assembly is intended for use in a critical shipboard system, where the integrity and reliability of the supplied material are paramount. The contract designates the item as SPECIAL EMPHASIS material (Level I, Scope of Certification, or Quality Assured), invoking stringent control procedures to ensure the correct material is received. The use of incorrect or defective material could result in catastrophic failure, serious injury, loss of life, or loss of vital shipboard systems. **Key Requirements and Objectives** - **Manufacturing and Testing:** The cable assembly must be manufactured per NAVSEA drawing 5486641 and MIL-DTL-24231 (and its slash sheets), with specific requirements for non-conductive coating and molding processes performed by approved vendors listed in the Electronic Contractor Data Submission (ECDS) system. Quality conformance tests and first article testing are required, including hydrostatic pressure, insulation resistance, and dielectric tests, all performed to exacting standards and tolerances. - **Certification and Traceability:** Contractors must maintain traceability from material to Objective Quality Evidence (OQE), with permanent markings and comprehensive records. Certificates of compliance must be submitted, showing traceability and attesting to full compliance with all requirements. - **Quality Assurance:** A robust quality system is required, compliant with ISO-9001 (or MIL-I-45208 as an alternate), and calibration systems per ISO-10012 or ANSI-Z540.3 with ISO-17025. Government Quality Assurance at source is mandated, and facilities must be available for audit. - **Inspection and Acceptance:** All records of inspections and tests must be maintained for at least seven years. Final inspection includes material sampling for form, fit, and function, with lot acceptance based on zero defects. - **Configuration Control:** Contractors must maintain baseline configuration and submit Engineering Change Proposals (ECPs) for any modifications affecting form, fit, function, or interface parameters. - **Packaging:** Preservation, packaging, packing, and marking must comply with MIL-STD 2073 and contract schedule requirements. - **Special Considerations:** Mercury and mercury-containing compounds are strictly prohibited. All waivers and deviations require review and approval by the Contracting Officer. **Contracting Entity and Contact Information** - **Entity:** NAVSUP Weapon Systems Support Mechanicsburg (NAVSUP WSS MECH), a federal office under the Department of Defense, Department of the Navy. - **Primary Contact:** Ashton K. Perry, Telephone: 717-605-7574, Email: [email protected] - **Location:** Mechanicsburg, PA - **Notice URL:** [SAM.gov Opportunity](https://sam.gov/opp/0dd12add6dfc43bcaf14d3357890eb48/view) **Procurement Type and Set-Aside** The solicitation was initially a total small business set-aside, but this requirement has been dissolved. The opportunity is now open to all qualified contractors. The solicitation has been extended to September 14, with all other terms unchanged. **Contract Lifecycle Considerations** Throughout the contract lifecycle, the following elements remain constant: - Adherence to specified manufacturing, testing, and certification requirements. - Maintenance of quality assurance and traceability systems. - Compliance with configuration control and change management procedures. - Government inspection and acceptance protocols. - Strict prohibition of mercury and maintenance of packaging standards. **Relevant Documentation and Standards** Applicable documents include NAVSEA drawings, MIL-DTL-24231, MIL-STD-792, ISO-9001, ISO-10012, ISO/IEC 17025, ANSI/ASQ Z1.4, and others as referenced in the solicitation. Access to drawings may require request and approval via SAM.gov and communication with the listed POC. **Summary for Contractors** This solicitation represents a highly specialized and critical requirement for cable assemblies used in shipboard systems, demanding rigorous manufacturing, testing, certification, and quality assurance processes. Contractors must demonstrate robust systems for traceability, configuration control, and compliance with all technical and quality requirements. The opportunity is open to all qualified suppliers, and interested parties should review the full solicitation and associated documents for detailed requirements and submission instructions. For further information or to request access to technical drawings, contractors should contact Ashton K. Perry at the provided email or phone number. **Response Deadline:** October 15, 2026, 20:10 **Notice Status:** Active Contractors with proven capabilities in mechanical power transmission equipment manufacturing, especially those experienced with Navy shipboard systems and stringent quality assurance protocols, are encouraged to evaluate this opportunity for alignment with their expertise.