COVER,PRESS SEAL

Key Dates
Due Date

-

Posted Date

-

Agency & Value
Agency

NAVSUP WEAPON SYSTEMS SUPPORT MECH

Contract Value

Not provided

Codes & Classification
Solicitation Number

N0010426QZB61

NAICS

332919 - Other Metal Valve and Pipe Fitting Manufacturing

Classification Code

4820

Additional Details
Set Aside

None

Place of Performance

-

SourceSAM
The Department of the Navy, through NAVSUP Weapon Systems Support Mechanicsburg (NAVSUP WSS Mech), has issued a solicitation for the procurement of a Pressure Seal Cover, specifically for a 5-inch check valve, in accordance with NAVSHIPS drawing 803-2177142, piece 42, part number 803-2177142-5XX-42. This procurement is classified under NAICS Code 332919 (Other Metal Valve and Pipe Fitting Manufacturing) and Product Service Code 4820 (Valves, Nonpowered). The solicitation is a Total Small Business Set-Aside, inviting qualified small business contractors to respond. **Purpose and Scope** The primary purpose of this procurement is to supply a Pressure Seal Cover for use in a critical shipboard system. The item is designated as SPECIAL EMPHASIS material (Level I, Scope of Certification, or Quality Assured), reflecting its importance to ship safety and operational integrity. The use of incorrect or defective material could result in catastrophic failure, serious injury, loss of life, or loss of vital shipboard systems. As such, stringent quality assurance and control procedures are invoked to ensure the receipt of correct and compliant material. **Key Requirements and Objectives** Contractors must manufacture the Pressure Seal Cover from ASTM-A216 Grade WCB material, with quantitative chemical and mechanical analysis required for certification. The item must undergo a series of rigorous tests and inspections, including: - Non-Destructive Testing (NDT) for weld repairs and production welds, with certifications required. - Hydrostatic testing of each component at 3250 PSIG for a minimum of three minutes, with acceptance criteria of no leakage or permanent deformation. - Visual and magnetic particle inspection per drawing specifications. - Radiography (RT) in accordance with T9074-AS-GIB-010/271, with criticality level I acceptance criteria. - Thread inspection per FED-STD-H28 series, with substitution of ASME B1 series allowed. - All internal threads must be cut, not cold-formed. - Welding and brazing must comply with Navy standards, with procedures and qualification data submitted for approval prior to any welding or brazing activity. Contractors are required to maintain traceability from material to certification test reports and Objective Quality Evidence (OQE), with permanent marking for traceability and identification. Certification data must be submitted to Portsmouth Naval Shipyard for review and acceptance prior to each shipment, using the Wide Area Work Flow (WAWF) system. No material may be shipped before receipt of acceptance. **Quality Assurance and Deliverables** A robust quality system is mandatory, conforming to ISO-9001 (or MIL-I-45208 as an alternate), with calibration systems per ISO-10012 or ANSI-Z540.3/ISO-17025. The contractor’s quality system and products are subject to government evaluation, verification, and audit throughout the contract lifecycle. Suppliers must submit documented quality system procedures prior to award, unless already on file with the procuring activity. Deliverables include: - Pressure Seal Cover manufactured and tested per specifications. - Complete certification and test reports, including chemical, mechanical, and NDT results. - Certificate of Compliance showing traceability to marking applied on each item. - Radiographic shooting sketches and RT film for review and approval. - Inspection system procedures and material handling documentation. **Contracting Entity and Contact Information** The contracting entity is NAVSUP Weapon Systems Support Mechanicsburg, a federal office under the Department of Defense, Department of the Navy. The primary point of contact is Landon A. Switzler, reachable at 717-605-3228 or via email at [email protected]. **Location and Logistics** The place of performance is not specified, but contractors must notify the government representative or nearest Defense Contract Management Agency (DCMA) office upon receipt of the order for planning government inspection. Packaging, preservation, and marking must comply with MIL-STD 2073 and contract schedule requirements. FOB Destination applies. **Procurement Type and Special Considerations** This is a fixed-price solicitation, issued bilaterally and requiring written acceptance by the contractor prior to execution. The procurement is subject to Emergency Acquisition Flexibilities (EAF) and is DO certified for national defense under the Defense Priorities and Allocations System (DPAS). Past performance will be considered in the evaluation of offers. Special considerations include: - Strict configuration control, with any waivers, deviations, or engineering changes requiring government approval. - Mercury-free requirement: no intentional addition or contact with mercury or mercury-containing compounds. - Flow-down of quality and certification requirements to all sub-tier suppliers and subcontractors. - Electronic signatures are acceptable for certification documents, provided they are controlled and unique to the signer. **Constant Elements Throughout Contract Lifecycle** Throughout the contract, the following elements remain constant: - Adherence to technical specifications, drawings, and referenced standards. - Maintenance of traceability and certification for all materials and processes. - Compliance with quality assurance and inspection requirements. - Submission of required documentation and certifications prior to shipment and acceptance. - Government oversight and source inspection at contractor and subcontractor facilities. **Summary for Contractors** This opportunity is highly specialized and demands rigorous quality control, traceability, and compliance with Navy and federal standards. Contractors with proven capabilities in manufacturing critical shipboard components, robust quality systems, and experience with Navy contracts and certification processes are well-positioned to respond. The solicitation is active, with responses due by August 17, 2026. Interested parties should review the full solicitation at https://sam.gov/opp/208fa615dc33457f939fa9a0b256dd8a/view and contact the primary POC for further information.