Wet Hoz Magnetic Particle Inspection Machine for 155mm M776/M284/199 Cannon Breech
Key Dates
Due Date
-
Posted Date
-
Agency & Value
Agency
W6QM MICC-FT DRUM
Contract Value
Not provided
Codes & Classification
Solicitation Number
W911S226U3523
NAICS
334519 - Other Measuring and Controlling Device Manufacturing
Classification Code
6650
Additional Details
The Department of the Army, through the Mission and Installation Contracting Command at Fort Drum (W6QM MICC-FT DRUM), has issued a combined synopsis/solicitation for the procurement of a Wet Hoz Magnetic Particle Inspection Machine specifically designed for the inspection of 155mm M284, M776, and M199 cannon breeches manufactured at the Watervliet Arsenal. This opportunity is classified under NAICS code 334519 (Other Measuring and Controlling Device Manufacturing) and Product Service Code 6650, and is set aside for SBA-eligible contractors.
The primary objective of this procurement is to acquire a state-of-the-art magnetic particle inspection system capable of thoroughly inspecting both the outer and internal surfaces of large-caliber cannon breeches. The machine will be installed and operated at Yuma Proving Ground, with the intent to enhance the Army’s non-destructive testing (NDT) capabilities, ensuring the integrity and safety of critical artillery components.
Key requirements for the inspection machine include:
- **High-Performance Magnetization:** The unit must deliver a maximum current output of 6,000 amps FWDC, with infinitely variable current control and electronic regulation via silicon controlled rectifiers (SCRs). It must support both magnetization and demagnetization (reversing DC) functions, with precise timing controls and thermal cut-out protection.
- **Robust Physical Construction:** The machine must feature a rigid steel framework with full louvered panel finish, a 30-inch head opening, a 30-inch coil (manually adjustable via pneumatic valve), and a stainless steel tank (58” L x 47” W, V-shaped) with mesh screens, dust covers, and hardwood grilles. The system must include a powered rotary turntable (500 lb. capacity, safety payload up to 1500 lbs.), an overhead 500 lb. hoist/trolley, and a full curtain inspection enclosure.
- **Advanced Inspection Environment:** The enclosure must block ambient light to below 2 footcandles, include a 1000 CFM roof extraction fan, and be equipped with both white and UV-A LED lighting (meeting ASTM E1444 and E3022 standards). A calibrated digital radiometer for UV and visible light measurement is required.
- **Magnetic Particle Solution System:** The system must include a minimum 30-gallon stainless steel tank with recirculation and agitation to maintain solution homogeneity within ±3% over 8 hours. It must feature a fluid catch tray, spray nozzle/hose, and secondary containment for leak management.
- **Comprehensive Control System:** Controls must be accessible within the inspection enclosure, including emergency stop, magnetization/demagnetization, pump, fan, and lighting controls. The digital current meter must be accurate to ±10% with a hold-and-display feature and current assurance indicator.
- **Diagnostic and Safety Features:** The machine must provide diagnostic capabilities for the magnetic control boards and include emergency stop stations at the inspection area.
- **Quality Assurance and Acceptance:** The contractor is responsible for all certifications and tests, including preliminary acceptance inspection at the contractor’s facility (witnessed by Yuma Proving Ground NDT experts) and final acceptance after installation at Yuma Proving Ground. Written certification of completeness, calibration, and conformance is required, and the contractor must provide materials and equipment for acceptance testing as specified.
- **Warranty:** Upon final acceptance, the contractor must provide a standard commercial warranty—one year for parts and labor, and five years for the frame and tank.
The contractor is also responsible for preservation, packaging, and delivery, ensuring the equipment is protected against damage during transit and delivered in good condition to Yuma Proving Ground.
This procurement is an active opportunity, with responses due by July 3, 2026. Interested SBA-eligible contractors with expertise in manufacturing advanced non-destructive testing equipment are encouraged to review the full solicitation and consider submitting a proposal. The primary point of contact for this opportunity is David Le ([email protected], 928-328-7686).
For further details and to access the official solicitation, please refer to the SAM.gov posting at: https://sam.gov/opp/841286da1869451982321fc130bff14c/view.
This opportunity represents a significant requirement for specialized inspection equipment, with stringent technical, quality, and warranty expectations, and is best suited for contractors with proven experience in the design, manufacture, and support of high-capacity magnetic particle inspection systems for defense applications.