STEM,FLUID VALVE

Key Dates
Due Date

-

Posted Date

-

Agency & Value
Agency

NAVSUP WEAPON SYSTEMS SUPPORT MECH

Contract Value

Not provided

Codes & Classification
Solicitation Number

N0010426QZB60

NAICS

332919 - Other Metal Valve and Pipe Fitting Manufacturing

Classification Code

4820

Additional Details
Set Aside

None

Place of Performance

-

SourceSAM
The Department of the Navy, through NAVSUP Weapon Systems Support (NAVSUP-WSS) Mechanicsburg, has issued a solicitation for the procurement of a "Stem, Fluid Valve" (Solicitation Number: N0010426QZB60). This procurement is classified under NAICS Code 332919, "Other Metal Valve and Pipe Fitting Manufacturing," and Product Service Code 4820, which pertains to valves, non-powered. The solicitation is currently active and is posted on SAM.gov, with responses due by October 8, 2026. **Purpose and Scope** The primary purpose of this procurement is to supply a stem for a 2-inch stop check valve, intended for use in a critical shipboard system. The material is designated as "Special Emphasis" (Level I, Scope of Certification, or Quality Assured), reflecting its essential role in ensuring the safety and operational integrity of naval vessels. The use of incorrect or defective material could result in catastrophic failure, including serious personnel injury, loss of life, or loss of vital shipboard systems. As such, stringent control procedures and quality assurance requirements are invoked to guarantee the receipt of correct and compliant material. **Key Requirements and Objectives** - **Technical Specifications:** The stem must be manufactured in accordance with NAVSHIPS drawing 803-2177525, piece 88, part number 803-2177525-C8XX-88, with modifications as specified in the solicitation. Material for the stem must be SAE-AMS-QQ-S-763, Class 410, Condition T, or ASTM-A182, Grade F6a, with mechanical properties modified per General Note 4.B of the referenced drawing. - **Testing and Certification:** Quantitative chemical and mechanical analysis is required, along with certifications for non-destructive tests (particularly weld repair, as applicable). Hardness testing must be performed per NAVSHIPS Standard Drawing 803-2177525 and ASTM-E18, with correction factors applied for readings on convex cylindrical surfaces. - **Thread and Surface Inspection:** All threads must be inspected per FED-STD-H28 series or ASME B1 series. O-ring grooves and mating sealing surfaces must be inspected per contractually invoked drawings or specifications, with repairs subject to approval if they exceed specified limits. - **Welding and Brazing:** All welding, brazing, and allied processes must comply with S9074-AR-GIB-010A/278, 0900-LP-001-7000, or S9074-AQ-GIB-010/248, as applicable. Procedures and qualification data must be submitted for review and approval prior to any welding or brazing. - **Traceability and Material Control:** The contractor must maintain traceability from the material to certification test reports and other required Objective Quality Evidence (OQE). Traceability markings must be permanently applied and maintained through all process operations, including subcontracted operations. - **Quality Assurance:** The contractor must provide and maintain a quality system in accordance with ISO-9001 (or MIL-I-45208 as an alternate), with calibration system requirements per ISO-10012 or ANSI-Z540.3 with ISO-17025. The quality system and products are subject to evaluation, verification, and inspection by government representatives. - **Documentation and Compliance:** Certificates of compliance, test certifications, and material certification reports must be submitted via Wide Area Work Flow (WAWF) for review and acceptance by Portsmouth Naval Shipyard prior to shipment. No material may be shipped before acceptance is received. - **Packaging:** Preservation, packaging, packing, and marking must comply with MIL-STD 2073 and the contract schedule. **Contracting Entity and Contact Information** - **Contracting Office:** NAVSUP Weapon Systems Support Mechanicsburg (NAVSUP-WSS Mech) - **Department:** Department of Defense, Department of the Navy - **Primary Contact:** Landon A. Switzler, Telephone: 717-605-3228, Email: [email protected] - **Notice URL:** [SAM.gov Opportunity](https://sam.gov/opp/b775f2896ae0409d98d0c44efce3b718/view) **Procurement Type and Special Considerations** - **Solicitation Type:** This is a formal solicitation for a fixed-price supply contract. - **Set-Aside:** The procurement is a total small business set-aside, restricting competition to qualified small business concerns. - **DPAS Rating:** The resultant contract will be a "DO" rated order under the Defense Priorities and Allocations System (DPAS), certified for national defense use. - **Emergency Acquisition:** The solicitation is issued under emergency acquisition flexibilities, requiring expedited response and compliance. - **Quality Assurance Manual:** Only sources with an acceptable Quality Assurance Manual are eligible for award. - **AbilityOne Support:** The Navy may use AbilityOne support contractors for administrative functions. **Constant Elements Throughout Contract Lifecycle** - The requirement for traceability, certification, and compliance with stringent quality assurance standards will remain constant. - The need for government review and acceptance of all certification data prior to shipment is a fixed requirement. - The contract will maintain configuration control, with any waivers, deviations, or engineering changes subject to government approval. - Mercury and mercury-containing compounds are strictly prohibited. - All documentation, inspection, and material handling procedures must be maintained and available for government review throughout the contract lifecycle. **Summary for Contractors** This opportunity is highly specialized and critical, requiring contractors with proven capabilities in precision manufacturing, quality assurance, and compliance with military and federal standards. Contractors must demonstrate robust quality systems, traceability controls, and the ability to meet rigorous certification and documentation requirements. The contract is suitable for small businesses with expertise in metal valve and pipe fitting manufacturing, particularly those experienced in supplying components for naval or defense applications. Interested parties should review the solicitation in detail and ensure their quality assurance manuals and procedures are up to date and compliant with the requirements outlined above. For further information or to submit questions, contractors may contact Landon A. Switzler at the provided email or phone number. All responses must be submitted by the specified deadline via the SAM.gov portal.