STEM,FLUID VALVE
Key Dates
Due Date
-
Posted Date
-
Agency & Value
Agency
NAVSUP WEAPON SYSTEMS SUPPORT MECH
Contract Value
Not provided
Codes & Classification
Solicitation Number
N0010426QZB59
NAICS
332919 - Other Metal Valve and Pipe Fitting Manufacturing
Classification Code
4820
Additional Details
The Department of the Navy, through NAVSUP Weapon Systems Support (NAVSUP-WSS) Mechanicsburg, has issued a solicitation (Procurement Identifier: N0010426QZB59) for the supply of a "STEM, FLUID VALVE" component. This procurement is classified under NAICS Code 332919 (Other Metal Valve and Pipe Fitting Manufacturing) and Product Service Code 4820, indicating its relevance to contractors specializing in metal valve and pipe fitting manufacturing for shipboard applications.
**Purpose and Scope**
The material solicited under this contract is intended for use in a critical shipboard system, where the integrity and reliability of supplied components are paramount. The stem for a 1-inch stop check valve must be manufactured in strict accordance with NAVSHIPS drawing 803-2177525, part number 803-2177525-C5XX-88, with specific modifications and amplifications as detailed in the solicitation. The contract designates this item as "SPECIAL EMPHASIS material" (Level I, Scope of Certification, or Quality Assured), invoking rigorous control procedures to ensure the correct material is received and installed. The consequences of incorrect or defective material are severe, potentially resulting in personnel injury, loss of life, or catastrophic failure of vital shipboard systems.
**Key Requirements and Objectives**
- **Material and Certification:** The stem must be fabricated from SAE-AMS-QQ-S-763, Class 410, Condition T, or ASTM-A182, Grade F6a, with mechanical properties modified per General Note 4.B of the referenced drawing. Quantitative chemical and mechanical analysis is required for certification.
- **Testing and Inspection:** Certifications for non-destructive tests (especially weld repair) are mandatory, and all threads must be inspected per FED-STD-H28 or ASME B1 series. Heat treatment records and certifications must be maintained and submitted, including tension and hardness testing for each heat treat charge.
- **Traceability:** All material must be traceable from the raw stock through all process operations to the finished component, with permanent markings as per MIL-STD-792. Certification data must be uniquely linked to traceability numbers, heat-lot, or heat-treat numbers.
- **Quality Assurance:** Contractors must maintain a quality system compliant with ISO 9001 (or MIL-I-45208 as an alternate), with calibration systems per ISO 10012, ANSI-Z540.3, and ISO/IEC 17025. The quality system and inspection procedures are subject to government review and audit throughout the contract lifecycle.
- **Configuration Control:** Contractors are required to maintain baseline configuration and submit Engineering Change Proposals (ECPs) for any modifications affecting form, fit, function, or interface parameters.
- **Welding and Brazing:** All welding, brazing, and allied processes must comply with Navy standards (S9074-AR-GIB-010A/278, 0900-LP-001-7000, S9074-AQ-GIB-010/248), with procedures and qualification data submitted for approval prior to execution.
- **Certificate of Compliance:** A comprehensive certificate of compliance must be submitted, certifying full adherence to all specifications, requirements, and tests performed, with traceability to each item.
- **Packaging:** Preservation, packaging, packing, and marking must comply with MIL-STD 2073 and contract schedule requirements.
**Contracting Entity and Contact Information**
- **Contracting Office:** NAVSUP Weapon Systems Support Mechanicsburg (NAVSUP-WSS Mech)
- **Department:** Department of Defense, Department of the Navy
- **Primary Contact:** Landon A. Switzler, Telephone: 717-605-3228, Email: [email protected]
- **Notice URL:** [SAM.gov Opportunity](https://sam.gov/opp/6b6ff5d29f7b4870ac5e9d080c433822/view)
**Procurement Type and Special Considerations**
- **Solicitation Type:** This is a formal solicitation for a fixed-price supply contract.
- **Set-Aside:** The procurement is a total small business set-aside, restricting competition to qualified small business concerns.
- **DPAS Rating:** The contract/order will be a "DO" rated order under the Defense Priorities and Allocations System (DPAS), certified for national defense use.
- **Emergency Acquisition:** The solicitation is issued under emergency acquisition flexibilities, emphasizing the urgency and criticality of the requirement.
- **Quality Assurance:** Only sources with an acceptable Quality Assurance Manual are eligible for award. Government Quality Assurance at source is required, and place of performance may not be changed without contracting officer authorization.
- **Submission and Acceptance:** Certification data must be submitted to Portsmouth Naval Shipyard for review and acceptance prior to each shipment. No material may be shipped before receipt of acceptance. Documentation must be submitted via Wide Area Work Flow (WAWF), with specific instructions for notification and acceptance.
**Constant Elements Throughout Contract Lifecycle**
- The requirement for rigorous material traceability, certification, and compliance with Navy standards will remain unchanged.
- The necessity for a robust quality assurance system and government oversight is a constant.
- Configuration control, including the submission of ECPs and waiver/deviation requests, is integral to contract performance.
- The prohibition of mercury and mercury-containing compounds in supplied materials is strictly enforced.
- All packaging, marking, and documentation requirements will persist throughout the contract.
**Summary for Contractors**
This opportunity is highly specialized and demands strict adherence to Navy technical, quality, and certification standards. Contractors must demonstrate proven capabilities in manufacturing critical shipboard components, maintaining traceability, and managing complex quality assurance systems. The contract is suitable for small businesses with established experience in metal valve and pipe fitting manufacturing, particularly those familiar with Level I/SUBSAFE requirements and Navy shipboard systems. Interested parties should review the solicitation in detail and ensure their quality systems, technical expertise, and documentation processes align with the stringent requirements outlined.
For further information or to submit a response, contact Landon A. Switzler at NAVSUP-WSS Mechanicsburg. The solicitation remains active, with responses due by October 8, 2026.