C.O.R.D.

Key Dates
Due Date

-

Posted Date

-

Agency & Value
Agency

NAVSUP WEAPON SYSTEMS SUPPORT MECH

Contract Value

Not provided

Codes & Classification
Solicitation Number

N0010426RZB58

NAICS

332919 - Other Metal Valve and Pipe Fitting Manufacturing

Classification Code

4820

Additional Details
Set Aside

None

Place of Performance

-

SourceSAM
Documents1
The Department of the Navy, through the Naval Supply Systems Command (NAVSUP) Weapon Systems Support Mechanicsburg (WSS Mech), has issued a solicitation (N0010426RZB58) for the procurement of two Cascade Orificial Resistive Device (C.O.R.D.) assemblies, specifically Assembly 206-5, intended for use in critical shipboard systems. This procurement is classified under NAICS code 332919 (Other Metal Valve and Pipe Fitting Manufacturing) and Product Service Code 4820, reflecting its focus on specialized metal components for naval applications. **Purpose and Scope** The C.O.R.D. assemblies are designated as SPECIAL EMPHASIS (Level I/SUBSAFE) material, underscoring their essential role in shipboard safety and operational integrity. The use of incorrect or defective material could result in catastrophic consequences, including personnel injury, loss of life, or loss of vital shipboard systems. As such, the procurement invokes stringent quality assurance, traceability, and certification requirements to ensure the highest standards of material and manufacturing integrity. **Key Requirements and Deliverables** - **Quantity and Configuration:** The solicitation is for two complete C.O.R.D. assemblies, each comprising the additively manufactured body (Piece 43A per Drawing 7549599) and all associated components (retaining ring, screw cap, label plate), delivered as fully assembled units in accordance with NAVSEA Drawing 801-6640811 ASSY 206-5(L1). - **Additive Manufacturing:** The body of the C.O.R.D. must be produced using Additive Manufacturing (AM), specifically Wire Arc Directed Energy Deposition (DED), with mandatory conformance to MIL-PRF-32804 Grade A Class 1 material requirements. Only Grade A is acceptable due to Level I/SUBSAFE designation. - **Material and Process Control:** All AM parts must be manufactured from a single heat of feedstock, with comprehensive traceability and certification for chemical and mechanical properties. As-printed surfaces are not permitted; all surfaces must be finished to meet drawing specifications. - **Testing and Inspection:** Extensive testing and certification are required, including: - Quality conformance/compliance inspection of feedstock and finished parts - Visual and dye penetrant inspection per T9074-AS-GIB-010/271 - Nondestructive inspection (radiography) per S9074-A4-GIB-010/AM-WIRE DED - Hydrostatic testing of each assembly - Thread inspection per FED-STD-H28 or ASME B1 series - Certification of all heat treatments, welds, and any repairs - **Documentation and Certification:** Contractors must submit a comprehensive certification data package, including: - Certificates of compliance for all materials and processes - Detailed test reports and traceability documentation - Additive manufacturing and welding procedure qualifications (with prior Navy approval letters if applicable) - Marking and labeling per MIL-PRF-32804 and MIL-STD-792 - All required CDRLs (e.g., DI-MISC-80678, DI-MISC-80875, DI-MISC-80876, DI-QCIC-81110, DI-MISC-81020) - **Quality System:** Contractors must maintain a quality system compliant with ISO 9001 (or MIL-I-45208 as an alternate), with calibration systems per ISO 10012 or ANSI-Z540.3/ISO-17025. The system and all procedures are subject to government review and audit. - **Configuration Control:** Contractors are responsible for maintaining the equipment baseline configuration and must submit Engineering Change Proposals (ECPs) for any modifications affecting form, fit, function, or interface. - **Subcontractor Management:** All requirements, including traceability, certification, and quality assurance, must be flowed down to subcontractors, with periodic audits and reviews to ensure compliance. **Contracting and Administrative Details** - **Contract Type:** Firm Fixed Price (FFP) - **Delivery Schedule:** Submission of all certification data (CDRLs) is required 20 days prior to delivery. The final delivery of material is due within 200 days, with partial and early deliveries authorized and encouraged at no additional cost. - **Priority Rating:** This is a "DO" rated order under the Defense Priorities and Allocations System (DPAS), indicating national defense urgency. - **Evaluation Criteria:** Past performance will be considered in the evaluation of offers. - **Submission Instructions:** Offers must include the original RFP and be submitted via email to the designated contacts; NECO bids are not accepted. Drawings are available on SAM.gov with restricted access—vendors must request access and notify the POC. - **Contact Information:** - Primary: Hannah M. Forsyth, 717-605-3998, [email protected] - Secondary: [email protected] **Special Considerations** - **No 3D Models Provided:** No 3D models (e.g., .stp, .stl, .prt files) are available from the government. - **No Shock/Vibration Requirement:** Shock and vibration testing are not required for this procurement. - **Mercury-Free:** All materials and processes must be mercury-free. - **Electronic Signatures:** Electronic signatures are acceptable for certification documents, provided they are controlled and unique to the signer. **Constant Elements Over Contract Lifecycle** Throughout the contract lifecycle, the following elements remain constant: - The requirement for Level I/SUBSAFE material and associated traceability and certification - The use of Additive Manufacturing for the C.O.R.D. body, with strict adherence to Grade A material and process controls - The necessity for comprehensive quality assurance, configuration management, and government oversight - The obligation to maintain and flow down all requirements to subcontractors and to provide full documentation and traceability for all materials and processes **Conclusion** This solicitation represents a highly specialized and controlled procurement for critical shipboard hardware, demanding advanced additive manufacturing capabilities, rigorous quality assurance, and robust documentation and traceability systems. Contractors with proven experience in Level I/SUBSAFE naval components, additive manufacturing of high-integrity metal parts, and comprehensive quality management systems are well-positioned to respond to this opportunity. Interested parties should carefully review all technical data, ensure compliance with all requirements, and coordinate with the designated contacts for access to restricted drawings and submission of proposals. For full details and access to solicitation documents, visit the official SAM.gov posting: [https://sam.gov/opp/ba5cddf2a8744a6397ce761e052d7ab7/view](https://sam.gov/opp/ba5cddf2a8744a6397ce761e052d7ab7/view).