Remanufacturing the Miter Gate Actuators of Locks Four and Five

Key Dates
Due Date

-

Posted Date

-

Agency & Value
Agency

W072 ENDIST PITTSBURGH

Contract Value

Not provided

Codes & Classification
Solicitation Number

W911WN26P1BT6

NAICS

333995 - Fluid Power Cylinder and Actuator Manufacturing

Classification Code

5945

Additional Details
Set Aside

None

Place of Performance

-

SourceSAM
The U.S. Army Corps of Engineers, Pittsburgh District (W072 ENDIST PITTSBURGH), has issued a Justification Notice for the planned award of a purchase order to Kerry Company, Inc. for the remanufacturing of the Miter Gate Actuators at Locks Four and Five on the Allegheny River. This procurement is classified under NAICS Code 333995 (Fluid Power Cylinder and Actuator Manufacturing), with Product Service Code 5945, and is being conducted in accordance with 41 U.S.C. § 3304(a)(1), which allows for other than full and open competition. The primary objective of this contract is to restore both miter gate actuators to a new and improved design, ensuring reliable and efficient operation of the lock system. The scope of work encompasses the simultaneous remanufacture of both actuators, excluding any modifications or improvements to the Cardanic Ring. Key tasks include the complete disassembly of the motors, comprehensive electrical testing and inspection for wear and damage, steam cleaning, bake-out, and sandblasting of necessary components. Following these preparatory steps, the actuators will be reassembled with two new bearings per unit, subjected to final electrical testing, and painted to meet original factory specifications. The contractor is required to provide and install valve kits, supply approximately 60 gallons of food-grade hydraulic oil, re-hone the cylinders, and furnish new pistons and glands featuring updated seal designs. Complete seal kits for both the cylinders and hydraulic power units are also to be provided. Surface preparation and finishing will involve sandblasting and repainting the actuators with Macropoxy 646 (dry film thickness of 4.0 to 6.0 mils) and an Acrolon 218 HS topcoat (dry film thickness of 2.0 to 4.0 mils), both in the original factory color. Additional deliverables include the repair and re-chroming of thrust rods, replacement of two bronze bushings in each cylinder trunnion, and the provision of stainless-steel tubing, fittings, and hardware as required. The contractor will also furnish and install a quick-disconnect manifold, reservoir end plate, two pressure tubes, two suction strainers, a P3AAN3040 bi-rotational hydraulic gear pump, and a complete set of pump-to-motor couplings and spider assemblies. This notice is not a request for competitive quotes; however, interested parties may express their interest and demonstrate their capability to fulfill the requirement by submitting a detailed capability statement by July 7, 2026. Submissions must include the company name, UEI number, CAGE code, point of contact information, and a comprehensive capability statement addressing the outlined requirements. All responses should be directed to the primary point of contact, Isaiah Johnson, at [email protected]. The Government reserves the right to determine whether to compete this proposed contract action based on the responses received. This notice fulfills the publicizing requirement for proposed contract actions and is currently active as posted on SAM.gov (Opportunity ID: 265e1a2d706546f084f59417cf0162f7). Contractors with expertise in fluid power cylinder and actuator manufacturing, particularly those with experience in remanufacturing complex hydraulic systems for critical infrastructure, are encouraged to review the requirements and consider submitting a capability statement if interested.