Military Housing Office Inspection Kits

Key Dates
Due Date

-

Posted Date

-

Agency & Value
Agency

FA8903 772 ESS PK

Contract Value

Not provided

Codes & Classification
Solicitation Number

MHO194

NAICS

334519 - Other Measuring and Controlling Device Manufacturing

Classification Code

6625

Additional Details
Set Aside

SBA

Place of Performance

San Antonio, Texas, UNITED STATES

SourceSAM
Documents2
The Department of the Air Force, through the 772nd Enterprise Sourcing Squadron (ESS PK) under the contracting entity FA8903, has issued a solicitation for the procurement of Military Housing Office Inspection Kits. This opportunity, identified by procurement number MHO194, is classified under NAICS code 334519 (Other Measuring and Controlling Device Manufacturing) and Product Service Code 6625. The procurement is set aside for Small Business Administration (SBA) participants, with the place of performance designated as San Antonio, Texas. The primary objective of this solicitation is to equip the Military Housing Office with comprehensive inspection kits to support housing inspections and ensure the safety, functionality, and compliance of military housing units. The scope of the procurement encompasses the supply and delivery of 194 units each of seven distinct types of inspection instruments, each with detailed technical specifications to ensure suitability for rigorous field use. The required components and their key specifications are as follows: 1. **Binoculars (194 units):** Acceptable models include Fujinon 10x50, Steiner 10x50 Military Marine, or equivalent. Specifications require 10x magnification, objective lens diameter of at least 50mm, a field of view of no less than 327 ft at 1000 yds, auto focus, fully coated high contrast optics, close focus of no more than 75 ft, IP distance of 56-74mm, diopter range of +/- 5 pdt, luminosity of at least 25, and rugged, waterproof construction with 8G impact resistance. Accessories must include objective covers, carrying case, and neck strap. 2. **Borescopes (194 units):** Acceptable models include Teslong TD-500, Kentfaith Dual-Lens Articulating Borescope, or equivalent. Required features are a minimum 1.0 megapixel camera, 2-way articulating probe with 210-degree articulation and diameter not exceeding 8.55mm, at least 60-degree field of view, 5-inch display with minimum 854x480 resolution, probe length between 4 and 8 feet, image resolution of 1920x1080 pixels, and IP67 waterproof durability. 3. **Combination IR and Probe Thermometers (194 units):** Acceptable models include Thermoworks IRT-2 with standard type T straight probe or equivalent. The IR thermometer must have a minimum range of -40 to 250°F, accuracy of +/- 1.8°F from 32°F to 149°F. The thermocouple probe must cover at least 32°F to 149°F with accuracy of +/- 0.9°F. A type T straight penetration probe with standard tip is required. 4. **Combustible Gas Meters / Leak Detectors (194 units):** Acceptable models include TPI 775, BPI Basics Kit, Gas Leak Detector CO Monitor, or equivalent. Carbon monoxide detection must offer 1ppm resolution or lower, 0-2,000ppm range or greater, and accuracy of +/- 5ppm or 5% of reading. Combustible gas detection must provide <50ppm resolution, 0-50,000ppm range, +/-10% accuracy, detection of natural gas and propane, audible alarms, and adjustable alarm thresholds. 5. **GFCI Testers (194 units):** Acceptable models include Ideal 61-502 or equivalent. Testers must be UL 1436 and CSA C22.2 no 160 listed, capable of detecting open ground, reverse polarity, open hot, open neutral, hot and ground reversed, and hot on neutral with hot open. A push-to-test function for GFCI receptacles is required. 6. **Water Pressure Testers (194 units):** Acceptable models include Watts 3/4 Inch Plastic Water Pressure Test Gauge or equivalent. Specifications include a 3/4 inch FIP connection, ASME type B accuracy, working pressure range of 0-140 psi, and maximum pressure of 200 psi. 7. **Thermal Imagers (194 units):** Devices must have a minimum thermal resolution of 160x120 pixels, thermal sensitivity below 150 mK, field of view of at least 57° x 44°, temperature range of 32°F to 170°F or greater, and support for thermal, visual, and fusion image modes. The integrated digital camera must be at least 2MP with a 70° x 55° field of view and a 320x240 color display. Moisture detection (both pinless and pin probe) and environmental sensors (air temperature, relative humidity, dew point) are required, with the option to provide separate meters if not integrated. The intended outcome of this procurement is to provide the Military Housing Office with reliable, high-quality inspection kits that enhance the effectiveness and safety of housing inspections. The kits are expected to support a wide range of diagnostic and safety checks, from visual and thermal inspections to gas leak detection and environmental monitoring. The solicitation is active, with a response deadline of July 6, 2026. Interested contractors should ensure their offerings meet or exceed the specified requirements and are encouraged to review any amendments or attachments referenced in the notice. The procurement is restricted to SBA-eligible small businesses. For further information or to submit inquiries, contractors may contact the primary point of contact, Gregorio Armand ([email protected], 210-363-3758), or the secondary contact, Latonya McGaskey ([email protected], 380-458-6193). Additional details and updates can be accessed via the official SAM.gov opportunity page at https://sam.gov/opp/89c9f249f9064243858735bae3d8ecfa/view. This opportunity represents a significant requirement for specialized inspection equipment, and contractors with experience in supplying measuring and diagnostic devices to federal agencies are encouraged to evaluate their capabilities against the detailed specifications provided.