Maintenance Dredging, Kennebec River, Kennebec Maine

Key Dates
Due Date

-

Posted Date

-

Agency & Value
Agency

W2SD ENDIST NEW ENGLAND

Contract Value

Not provided

Codes & Classification
Solicitation Number

W912WJ26BA015

NAICS

237990 - Other Heavy and Civil Engineering Construction

Classification Code

Y1QA

Additional Details
Set Aside

None

Place of Performance

-

SourceSAM
Documents1
The U.S. Army Corps of Engineers, New England District (W2SD ENDIST NEW ENGLAND), is soliciting bids for a maintenance dredging project in the Kennebec River, Kennebec, Maine. This procurement, identified under solicitation number W912WJ26BA015, is a critical initiative aimed at ensuring the navigational reliability of the federally authorized 27-foot deep, 500-foot wide Federal Navigation Project (FNP) in the Lower Kennebec River. The primary objective is to support the operational requirements of the U.S. Navy, specifically facilitating the passage and testing of newly constructed surface combatants at Bath Iron Works (BIW). The scope of work encompasses the removal of approximately 80,000 cubic yards (cy) of clean sand, which includes 30,000 cy of required material and an additional 50,000 cy of overdepth (OD) material. The dredging operations are distributed across three key areas: approximately 61,000 cy will be extracted from the Doubling Point area (just below Bath), 10,000 cy from the Popham Beach area (at the river mouth), and 9,000 cy from Bath Reach (just below the Carlton Bridge and adjacent to BIW). Notably, the Doubling Point dredging will address sand-waves to an elevation of -32 feet Mean Lower Low Water (MLLW) with a +2 feet overdepth allowance, enhancing the likelihood of maintaining adequate channel depths over time. Dredged material management is a significant component of the project. Material from Bath Reach and Doubling Point will be transported to a previously utilized in-river disposal site north of Bluff Head, situated in waters 45 to 90 feet deep. Material from the Popham Beach area will be placed at the newly established Jackknife Ledge West Disposal Site, located in 30 to 45 feet of water just northwest of the former Jackknife Ledge site. The anticipated duration for the dredging and material placement is three to four weeks, with the authorized work window extending from December 1, 2026, to February 15, 2027. This schedule is designed to minimize environmental impacts and align with operational requirements. This opportunity is classified under NAICS code 237990 (Other Heavy and Civil Engineering Construction) and Product Service Code Y1QA. The procurement is managed by the Department of Defense, Department of the Army, with Elizabeth Glasgow serving as the primary point of contact ([email protected], 978-318-8671). Contractors considering this opportunity should have demonstrated expertise in large-scale dredging operations, in-river and nearshore material placement, and compliance with federal environmental and safety standards. The project’s complexity and the tight execution window necessitate robust project management capabilities and experience working in sensitive marine environments. Interested parties are encouraged to review the solicitation and associated documents available on SAM.gov (Opportunity ID: eb12d5904eb345db828041ca2e43ec09) and submit responses by July 28, 2026. This procurement represents a significant opportunity for qualified contractors specializing in heavy and civil engineering construction, particularly those with a track record of successful dredging projects in navigational waterways.