Air Curtain Ash Rake
Key Dates
Due Date
-
Posted Date
-
Agency & Value
Agency
W6QM MICC-FT DRUM
Contract Value
Not provided
Codes & Classification
Solicitation Number
W911S226U3431
NAICS
333413 - Industrial and Commercial Fan and Blower and Air Purification Equipment Manufacturing
Classification Code
4210
Additional Details
The Department of the Army, under the auspices of the W6QM MICC-FT DRUM contracting office, has issued a Combined Synopsis/Solicitation for the procurement of a new air curtain ash rake, intended for delivery in 2026 or 2027. This solicitation seeks a specialized tool compatible with the Air Burners S327 Air Curtain, as well as other Fire Box S Series units (including S111, S220, S327, S330, S460), both skid-mounted and trailer-mounted, and Air Curtain Destructor (ACD) military variants. The procurement falls under NAICS Code 333413, which pertains to Industrial and Commercial Fan and Blower and Air Purification Equipment Manufacturing, and is classified with Product Service Code 4210.
The primary purpose of this procurement is to acquire an ash rake designed for operational use in high-temperature burn chambers, supporting ash management and chamber maintenance during and after active burns. The tool will be used for ash leveling, pulling unburned material toward the combustion zone, clearing the burn chamber floor after shutdown, managing hot coals to maintain optimal burn efficiency, and assisting with chamber clean-out before the next operational cycle.
Key requirements for the ash rake include:
- Construction: The rake head must be fabricated from high carbon steel with reinforced welds, ensuring durability and resistance to heavy debris loads. The handle must be constructed from heavy gauge steel tubing, providing strength and operator safety.
- Heat Rating: The tool must withstand continuous exposure to chamber temperatures ranging from 1,600 to 2,000°F.
- Finish: An industrial high-temperature black oxide or heat-resistant coating is required for longevity and performance.
- Dimensions: The overall length should be between 72 and 96 inches (6 to 8 feet), with a rake head width of 12 to 16 inches, head thickness of 1/4 to 3/8 inch plate steel, and handle diameter of 1 to 1.25 inches.
- Weight: The tool should weigh approximately 12 to 18 pounds, depending on length and head configuration.
- Safety Features: Extended handle length for operator standoff distance, heat-resistant construction to prevent tool failure, and a reinforced rake head to withstand heavy debris loads.
- Optional Implement: An ash clean-out implement with a blank 1-inch steel faceplate is available, allowing for future connection modifications by the buyer.
The deliverables include the ash rake, an operator/installation manual, and standard warranty coverage. The final price must include shipping to Fort Hood, Texas (ZIP 76544).
This procurement is set aside for SBA-qualified entities, ensuring participation from small businesses. The solicitation is active, with a response deadline of June 19, 2026. Interested contractors should direct inquiries to Arthur West, the primary contact, via email at [email protected] or by phone at 254-287-1574.
Contractors considering this opportunity should assess their ability to manufacture and deliver a high-performance, heat-resistant ash rake meeting the specified dimensions, materials, and safety requirements. The tool’s compatibility with multiple Air Curtain and Fire Box units, as well as its robust construction for demanding operational environments, are central to the contract’s scope. The procurement is governed by federal standards and will remain consistent in its requirements throughout the contract lifecycle.
For further details and to access the solicitation, contractors may visit the official notice at https://sam.gov/opp/a69d5623e546440381489802efeeb7ec/view.