BUSHING,SLEEVE

Key Dates
Due Date

-

Posted Date

-

Agency & Value
Agency

NAVSUP WEAPON SYSTEMS SUPPORT MECH

Contract Value

Not provided

Codes & Classification
Solicitation Number

N0010426QFE59

NAICS

332991 - Ball and Roller Bearing Manufacturing

Classification Code

3120

Additional Details
Set Aside

None

Place of Performance

-

SourceSAM
The Department of the Navy, through the Naval Supply Systems Command (NAVSUP) Weapon Systems Support office in Mechanicsburg, PA, has issued a solicitation (Procurement Identifier: N0010426QFE59) for the supply of a "BUSHING, SLEEVE" component. This procurement is classified under NAICS code 332991 (Ball and Roller Bearing Manufacturing) and Product Service Code 3120, and is designated as a total small business set-aside, inviting participation exclusively from qualified small business concerns. **Purpose and Scope** The primary objective of this solicitation is to procure a Backup Stem Sleeve, a critical component intended for use in a vital shipboard system. The nature of this application is such that any failure or defect in the supplied material could result in catastrophic consequences, including serious personnel injury, loss of life, or the loss of essential shipboard systems. As a result, the item is designated as SPECIAL EMPHASIS material (Level I, Scope of Certification, or Quality Assured), invoking stringent control and quality assurance procedures to ensure the delivery of correct and fully compliant material. **Key Requirements and Deliverables** Contractors are required to manufacture the Backup Stem Sleeve in strict accordance with NAVSEA Drawing 803-5959302, Item 12, and General Notes Drawing 803-5959311, as further detailed and modified within the solicitation. The material must conform to E.B. Spec 3644, with specific supplementary notes, and must be accompanied by comprehensive quantitative chemical and mechanical analysis certifications. Critical quality assurance and testing requirements include: - Non-destructive testing (NDT), including dye penetrant inspection and radiography, with certifications required for weld repairs and production welds. - All welding and brazing must comply with NAVSEA and MIL standards, with procedures and personnel qualifications submitted and approved prior to commencement. - O-ring grooves and sealing surfaces must be inspected per contractually invoked drawings/specifications, with repairs subject to strict criteria. - Configuration control must be maintained, with any waivers, deviations, or engineering change proposals (ECPs) submitted for government approval. - Mercury and mercury-containing compounds are strictly prohibited in the manufacturing process. - A Certificate of Compliance is mandatory, certifying full adherence to all procurement, specification, and drawing requirements, and must include traceability to each item. - All material must be traceable to certification test reports via unique markings, and traceability must be maintained through all processing and subcontracted operations. - Quality system requirements mandate compliance with ISO-9001 (or MIL-I-45208), with calibration systems per ISO-10012 or ANSI-Z540.3/ISO-17025. - Government Source Inspection (GSI) is required at the source, and the contractor’s quality system and facilities are subject to audit and verification by government representatives. - Subcontractor controls and flow-down of quality requirements are required for all sub-tier suppliers. **Packaging and Delivery** Preservation, packaging, packing, and marking must comply with MIL-STD-2073 and any additional requirements specified in the contract schedule. Early and incremental deliveries are acceptable at no additional cost to the government. The final delivery of material is required within 365 days of contract award, with certification data submitted to Portsmouth Naval Shipyard for review and acceptance prior to each shipment. No material may be shipped before receipt of acceptance. **Contract Administration and Special Considerations** - Only sources with an acceptable Quality Control Manual are eligible for award; the procurement will not be delayed for approval of new sources. - The contract will be a DO-rated order under the Defense Priorities and Allocations System (DPAS), certified for national defense use. - All contractual documents are considered issued upon electronic transmission or mailing by the government. - Past performance will be considered in the evaluation of offers. - Access to drawings, if required, must be requested via the solicitation page on SAM.gov, with follow-up to the primary point of contact. **Contracting Entity and Contact Information** - Contracting Entity: NAVSUP Weapon Systems Support, Mechanicsburg, PA (Office) - Department: Department of Defense, Department of the Navy - Primary Contact: Jordan D. Neely, Telephone: 717-605-8197, Email: [email protected] **Response and Submission** The solicitation was posted on June 18, 2026, with responses due by July 27, 2026. All interested and qualified small business contractors are encouraged to review the full solicitation and associated technical documentation via the official SAM.gov opportunity page: [https://sam.gov/opp/a05768f2a0724b40b5aab401242b43ba/view](https://sam.gov/opp/a05768f2a0724b40b5aab401242b43ba/view). **Summary for Contractors** This opportunity is highly specialized, requiring robust quality assurance systems, strict adherence to technical specifications, and comprehensive documentation and traceability. Contractors must demonstrate proven experience with Level I/SUBSAFE or similar high-assurance naval or defense components, and be prepared for rigorous government oversight throughout the contract lifecycle. The procurement is well-suited for small businesses with established capabilities in precision manufacturing, quality control, and compliance with military standards for critical shipboard components.