48--PARTS KIT,BALL VALV
Key Dates
Due Date
-
Posted Date
-
Agency & Value
Agency
NAVSUP WEAPON SYSTEMS SUPPORT MECH
Contract Value
Not provided
Codes & Classification
Solicitation Number
N0010426QFE69
NAICS
332919 - Other Metal Valve and Pipe Fitting Manufacturing
Classification Code
4820
Additional Details
The Department of the Navy, through NAVSUP Weapon Systems Support Mechanicsburg (NAVSUP WSS MECH), has issued a solicitation (Procurement Identifier: N0010426QFE69) for the supply of a Parts Kit for a 2-1/2 inch Ball Valve. This procurement is classified under NAICS code 332919 (Other Metal Valve and Pipe Fitting Manufacturing) and Product Service Code 4820, and is designated as a total small business set-aside. The solicitation is active, with responses due by July 30, 2026.
**Purpose and Scope**
The primary objective of this procurement is to acquire a Parts Kit for a 2-1/2 inch Ball Valve, intended for use in a critical shipboard system. The kit is considered SPECIAL EMPHASIS material (Level I, Scope of Certification, or Quality Assured), reflecting its essential role in ensuring the safety and operational integrity of naval vessels. The failure or malfunction of these components could result in severe consequences, including personnel injury, loss of life, or catastrophic damage to shipboard systems.
**Key Requirements and Deliverables**
The Parts Kit must be manufactured in strict accordance with NAVSEA drawing 7108792, comprising one Ball (Piece 6) and two mating Seats (Piece 5), with seat details specified in NAVSEA drawing 7284884. The kit includes both metallic and non-metallic components, each subject to rigorous material, testing, and certification requirements:
- **Materials**:
- The Ball must be fabricated from QQ-N-286, Form 2, Annealed (Hot Finished or Cold Drawn) and Age Hardened, Finish A or B. No weld repairs are permitted on QQ-N-286 material.
- The Seats must be made from Torlon 4503, 4203, or 4203L (unfilled polyamide-imide) per Electric Boat Specification 4147.
- **Testing and Certification**:
- Quantitative chemical and mechanical analysis is required for the Ball, with certifications for annealing, age hardening, and ultrasonic inspection (for material 4 inches or greater in diameter).
- Hydrostatic testing of each Ball at 6750 PSI for 30 minutes is required, with no leakage or deformation permitted. Dye penetrant inspection may be substituted if a hydrostatic test fixture is unavailable.
- Odor testing for the Seats per NAVSEA SS800-AG-MAN-010/P-9290.
- All certifications must be traceable to the specific items delivered, with comprehensive documentation submitted via Wide Area Work Flow (WAWF) and reviewed by Portsmouth Naval Shipyard prior to shipment.
- **Quality Assurance and Traceability**:
- The contractor must maintain a quality system compliant with ISO-9001 (or MIL-I-45208 as an alternate), with calibration systems per ISO-10012 or ANSI-Z540.3 with ISO-17025.
- Full traceability from raw material to finished product is mandatory, with permanent marking requirements for both metallic and non-metallic parts, ensuring linkage to certification data.
- Government Source Inspection (GSI) at the contractor’s facility is required, and the contractor must notify the appropriate government representative upon receipt of the order.
- **Configuration Control and Change Management**:
- The contractor is responsible for maintaining the baseline configuration of the equipment and must submit Engineering Change Proposals (ECPs) for any modifications affecting form, fit, function, or interface.
- All waivers and deviations require prior approval from the Contracting Officer and must be classified as Critical, Major, or Minor.
- **Packaging and Delivery**:
- Preservation, packaging, and marking must comply with MIL-STD-2073 and contract-specific requirements.
- Final delivery of material is required within 365 days of contract award, with certification data submitted at least 20 days prior to scheduled delivery.
- **Special Considerations**:
- The contract is a DO-rated order under the Defense Priorities and Allocations System (DPAS), certified for national defense use.
- All materials must be mercury-free, and any contamination will result in rejection.
- The use of non-specified materials or coatings requires special engineering approval and may necessitate additional testing.
**Contracting Entity and Contact Information**
- **Contracting Office**: NAVSUP Weapon Systems Support Mechanicsburg (NAVSUP WSS MECH)
- **Department/Agency**: Department of Defense, Department of the Navy
- **Primary Contact**: Noelle M. Smith
- Telephone: 717-605-3992
- Email: [email protected]
**Procurement Type and Set-Aside**
This is a federal solicitation for supplies, specifically a total small business set-aside, encouraging participation from qualified small business manufacturers with the requisite technical capabilities and quality assurance systems.
**Summary for Contractors**
Contractors considering this opportunity should have demonstrated experience in manufacturing high-precision, safety-critical valve components for naval or similar applications. The solicitation demands strict adherence to military and industry standards, comprehensive quality assurance and traceability systems, and the ability to manage complex certification and documentation requirements. The contract’s critical safety designation, configuration control mandates, and government inspection requirements underscore the need for robust internal controls and a proven track record in delivering mission-essential hardware to the defense sector.
Interested parties should review the full solicitation and referenced specifications and drawings, ensure their quality systems and documentation processes are compliant, and be prepared to submit detailed certification and test data as part of their deliverables. All inquiries and submissions should be directed to the contracting officer listed above.
For further details and to access the solicitation, visit: https://sam.gov/opp/53758562745a44a49a3b321faddeced3/view