STEM

Key Dates
Due Date

-

Posted Date

-

Agency & Value
Agency

NAVSUP WEAPON SYSTEMS SUPPORT MECH

Contract Value

Not provided

Codes & Classification
Solicitation Number

N0010426QFE55

NAICS

332919 - Other Metal Valve and Pipe Fitting Manufacturing

Classification Code

4820

Additional Details
Set Aside

None

Place of Performance

-

SourceSAM
The Department of the Navy, through NAVSUP Weapon Systems Support Mechanicsburg (NAVSUP WSS MECH), has issued a solicitation (Procurement Identifier: N0010426QFE55) for the manufacture and supply of a "Stem" component, classified under NAICS Code 332919 (Other Metal Valve and Pipe Fitting Manufacturing) and Product Service Code 4820. This procurement is a 100% Small Business Set-Aside, inviting qualified small business contractors to participate. The solicitation is active, with a response deadline of September 8, 2026. **Purpose and Scope** The material covered by this contract is intended for use in a critical shipboard system. Due to the potential consequences of failure—including serious injury, loss of life, or loss of vital shipboard systems—the item is designated as SPECIAL EMPHASIS material (Level I, Scope of Certification, or Quality Assured). The procurement invokes stringent control procedures to ensure the correct material is received and installed, reflecting its role as a Critical Safety Item (CSI). **Key Requirements and Objectives** - **Technical Specifications:** The "Stem" must be manufactured in accordance with Naval Sea Systems Command Drawing 4558766, item 12A, with specific amplifications and modifications as detailed in the solicitation. Weld repair is not permitted on QQ-N-286 material, which must be supplied in Form 2, annealed and age-hardened. - **Testing and Certification:** Quantitative chemical and mechanical analysis is required for the stem. Ultrasonic inspection is mandated for starting material with a diameter or minimum distance between parallel surfaces of 4 inches or greater, or as otherwise specified. Slow Strain Rate Tensile Tests must be performed by one of several designated laboratories, including Huntington Alloys, Metallurgical Consultants, Naval Surface Warfare Center Carderock, Teledyne Allvac, Westmoreland Mechanical Testing, Mannesmann Rohrenwerke, and ThyssenKrupp VDM USA. - **Quality Assurance:** Contractors must maintain a quality system compliant with ISO-9001, ISO-10012, ANSI-Z540.3, and ISO-17025, or MIL-I-45208 and MIL-STD-45662. The system is subject to government evaluation, verification, and audit. Suppliers of Level I/SUBSAFE material must submit documented quality system procedures prior to award unless already on file. - **Traceability and Certification:** Rigorous traceability from material to certification test reports is required. Certification data must be submitted to Portsmouth Naval Shipyard (DODAAC N50286) for review and acceptance prior to each shipment, via Wide Area Work Flow (WAWF). No material may be shipped before acceptance. - **Configuration Control:** Contractors must maintain baseline configuration and submit Engineering Change Proposals (ECPs) for any modifications affecting form, fit, function, or interface parameters. - **Material Handling and Inspection:** Procedures must ensure segregation, marking, and traceability of raw materials, including those sent for subcontracted operations. Receiving inspection must verify traceability, completeness, and compliance of certification test reports. - **Packaging:** Preservation, packaging, packing, and marking must comply with MIL-STD 2073 and contract schedule requirements. - **Warranty:** Supplies are warranted for one year from the date of delivery. **Contracting Entity and Contact Information** - **Contracting Office:** NAVSUP Weapon Systems Support Mechanicsburg (NAVSUP WSS MECH), a federal office under the Department of Defense, Department of the Navy. - **Location:** Mechanicsburg, PA (primary contracting office); Portsmouth Naval Shipyard (N50286) is the designated ship-to location. - **Primary Contact:** Nathaniel Ventura, Telephone: 929-602-9222, Email: [email protected] - **Notice URL:** [SAM.gov Opportunity](https://sam.gov/opp/cec4e2b2ee9e45668fffbb241e9798d7/view) **Procurement Type and Special Considerations** - **Solicitation Type:** Fixed-price contract with inspection and acceptance at destination. - **Set-Aside:** Total Small Business Set-Aside. - **DPAS Rating:** Any contract awarded will be a "DO" rated order, certified for national defense use under the Defense Priorities and Allocations System (DPAS). - **Compliance:** The procurement incorporates Buy American, Free Trade Agreements, and Balance of Payments Program clauses. Security prohibitions and exclusions apply per current class deviations. - **Submission and Review:** Certification data must be submitted at least 20 days prior to scheduled delivery; Portsmouth NSY review/acceptance occurs within 30 working days after receipt. Final delivery is required within 365 days of contract effective date. **Constant Elements Throughout Contract Lifecycle** - The requirement for rigorous quality assurance, traceability, and certification will remain constant. - Compliance with specified technical standards, configuration control, and government inspection procedures is mandatory. - The contract will continue to be governed by the applicable federal regulations, quality standards, and DPAS priority rating. - The Portsmouth Naval Shipyard will remain the review and acceptance authority for certification data. - The contract will require ongoing adherence to packaging, marking, and material handling requirements. **Summary for Contractors** This opportunity is highly specialized, requiring expertise in manufacturing critical shipboard components to exacting military standards. Contractors must demonstrate robust quality systems, traceability procedures, and the ability to comply with stringent certification and inspection requirements. The contract is suitable for small businesses with proven capabilities in metal valve and pipe fitting manufacturing, particularly those experienced with Level I/SUBSAFE materials and critical safety items for naval applications. Interested parties should review the full solicitation and ensure their systems, processes, and personnel meet the outlined requirements before submitting a proposal. For further information or to submit questions, contractors may contact Nathaniel Ventura at [email protected] or 929-602-9222.