48--PARTS KIT,BALL VALV
Key Dates
Due Date
-
Posted Date
-
Agency & Value
Agency
NAVSUP WEAPON SYSTEMS SUPPORT MECH
Contract Value
Not provided
Codes & Classification
Solicitation Number
N0010426QZB45
NAICS
332919 - Other Metal Valve and Pipe Fitting Manufacturing
Classification Code
4820
Additional Details
The Department of the Navy, through the Naval Supply Systems Command (NAVSUP) Weapon Systems Support office in Mechanicsburg, PA, has issued a solicitation (Procurement Identifier: N0010426QZB45) for the supply of a Parts Kit for a 1-inch Ball Valve. This procurement is classified under NAICS code 332919 (Other Metal Valve and Pipe Fitting Manufacturing) and Product Service Code 4820, reflecting its focus on specialized shipboard valve components. The solicitation is currently active, with responses due by July 20, 2026.
**Purpose and Scope**
The primary objective of this procurement is to acquire a Parts Kit for a 1-inch Ball Valve, which is a critical component used in vital shipboard systems. The kit consists of one Ball Assembly (Find 2) and two mating Seat Assemblies (Find 16), manufactured in accordance with Sargent Industries Drawing 27044 and associated specifications. The intended outcome is to ensure the reliable operation of shipboard systems where failure could result in severe consequences, including personnel injury, loss of life, or loss of the ship itself. As such, the material is designated as SPECIAL EMPHASIS (Level I, Scope of Certification, or Quality Assured), invoking stringent control and certification procedures.
**Key Requirements and Deliverables**
Contractors are required to provide parts that strictly conform to the referenced drawings and specifications, with particular emphasis on material traceability, certification, and quality assurance. Key requirements include:
- **Material Specifications:**
- The Ball (Find 2) must be manufactured from SAE-AMS-6931 or SAE-AMS-6932 material.
- The Seat (Find 16) must be made from Delrin (Dupont AF DE588, Teflon Filled Acetal) with specified physical and mechanical properties.
- **Testing and Certification:**
- Quantitative chemical and mechanical analysis for specified parts.
- Certifications for visual, dye penetrant, and non-destructive testing of weldments.
- Hydrostatic or alternative dye penetrant testing for each ball.
- Radiography for weldments, with traceability and film submission requirements.
- **Quality Assurance:**
- Contractors must maintain a quality system compliant with ISO 9001 (or MIL-I-45208 as an alternate), with calibration systems per ISO 10012 or ANSI-Z540.3/ISO-17025.
- Government Quality Assurance at source is required, and the contractor’s quality system is subject to review and audit.
- All suppliers of Level I/SUBSAFE material must submit documented quality system procedures prior to award.
- **Traceability and Documentation:**
- Full traceability from raw material to finished product is mandatory, with permanent marking requirements for metallic parts and tagging for non-metallic seats.
- Certificates of Compliance must be provided, demonstrating conformance to all contract requirements and traceability to individual items.
- All required data submissions (e.g., CDRLs, test reports, weld/braze procedures) must be provided in electronic format as specified.
- **Packaging and Marking:**
- Preservation, packaging, and marking must comply with MIL-STD-2073 and contract-specific instructions.
- **Security and Access:**
- Access to certain classified documents (e.g., Drawing 6404016, CONFIDENTIAL) is required, and contractors must comply with the attached Contract Security Classification Specification (DD Form 254).
- **Special Considerations:**
- Mercury and mercury-containing compounds are strictly prohibited.
- The use of AbilityOne support contractors and mandatory electronic workflow modules is noted.
- The contract/order will be a “DO” rated order under the Defense Priorities and Allocations System (DPAS), indicating national defense urgency.
- Only sources with an acceptable Quality Assurance Manual are eligible for award.
**Contracting Entity and Contact Information**
- **Contracting Office:** NAVSUP Weapon Systems Support (NAVSUP-WSS), Mechanicsburg, PA
- **Department:** Department of Defense, Department of the Navy
- **Primary Contact:** Kathryn E. Shutt, Telephone: 717-605-2430, Email: [email protected]
**Procurement Type and Special Provisions**
This is a formal solicitation issued under emergency acquisition flexibilities, reflecting the criticality of the requirement. The resultant award will be bilateral, requiring written acceptance by the contractor prior to execution. The procurement is not explicitly set aside for small business, but small business subcontracting plans and equal opportunity provisions for veterans and workers with disabilities are invoked. The solicitation includes a range of standard and defense-specific clauses, including Buy American and Free Trade Agreements compliance, cost accounting standards, and limitations on pass-through charges.
**Constant Elements Over Contract Lifecycle**
Throughout the contract, the following elements will remain constant:
- The requirement for strict adherence to technical specifications, drawings, and quality assurance protocols.
- The necessity for comprehensive traceability and certification of all materials and processes.
- The obligation to maintain and, if necessary, update quality system documentation and submit to government review.
- The expectation of government source inspection and acceptance prior to shipment.
- The prohibition of mercury and the requirement for secure handling of classified information.
- The use of electronic data submission systems and compliance with all contractually invoked reporting and documentation requirements.
**Summary for Contractors**
This opportunity is suited for contractors with demonstrated experience in manufacturing high-reliability, traceable, and certified valve components for defense or similarly regulated industries. The technical and quality requirements are rigorous, reflecting the critical safety implications of the end-use application. Contractors must be prepared to support extensive documentation, testing, and government oversight throughout the contract lifecycle. Interested parties should review the full solicitation and associated references for detailed requirements and ensure their quality systems, personnel, and facilities are capable of meeting the Navy’s stringent standards.
For further information and to access the solicitation, visit the official SAM.gov opportunity page: [https://sam.gov/opp/7c94e496b9764a65ace013312a396670/view](https://sam.gov/opp/7c94e496b9764a65ace013312a396670)