NUT,PLAIN,HEXAGON
Key Dates
Due Date
-
Posted Date
-
Agency & Value
Agency
NAVSUP WEAPON SYSTEMS SUPPORT MECH
Contract Value
Not provided
Codes & Classification
Solicitation Number
N0010426QFE45
NAICS
332722 - Bolt, Nut, Screw, Rivet, and Washer Manufacturing
Classification Code
5307
Additional Details
The Department of the Navy, through NAVSUP Weapon Systems Support Mechanicsburg (NAVSUP WSS Mech), has issued a solicitation for the supply of plain hexagon nuts, classified under NAICS Code 332722 (Bolt, Nut, Screw, Rivet, and Washer Manufacturing) and Product Service Code 5307. This procurement is designated as a total small business set-aside, inviting qualified small business manufacturers to participate.
Purpose and Scope:
The materials solicited under this contract are intended for use in critical shipboard systems, where the integrity and reliability of components are paramount. The nuts specified are designated as SPECIAL EMPHASIS material (Level I, Scope of Certification, or Quality Assured), reflecting their role in applications where failure could result in serious injury, loss of life, or catastrophic damage to naval vessels. As such, the procurement invokes rigorous control procedures to ensure the delivery of correct, defect-free material.
Key Requirements and Objectives:
Offerors are required to manufacture and supply nuts in accordance with MIL-DTL-1222, with specific ordering data provided in the solicitation. The nuts must be Grade B16 (ASTM-A193), hardened and tempered, sized at 3/4 inch diameter and 4 1/4 inches in length, with 10 UNC thread series, Class 2A fit, and chamfered end configuration. Phosphate coating per MIL-DTL-16232 Type Z, Class 3 is required for applicable items. Substitution of material grades is strictly prohibited unless approved by the Procurement Contracting Officer (PCO).
Certifications and traceability are central to this procurement. Contractors must provide one additional fastener per uniquely identified heat/lot in each shipment, maintaining complete traceability. Certifications for chemical, mechanical, and non-destructive tests are required, including liquid penetrant or magnetic particle inspection (wet method), performed per T9074-AS-GIB-010/271 and sampled according to MIL-DTL-1222. Hydrogen embrittlement relief heat treatment is mandated for coated fasteners exceeding specified hardness thresholds, with certification required.
Configuration control is enforced, requiring contractors to maintain baseline configuration and submit engineering change proposals (ECPs) for any modifications affecting form, fit, function, or interface parameters. All waivers and deviations must be reviewed and approved by the PCO, classified as critical, major, or minor, and documented accordingly.
Quality Assurance and Deliverables:
Contractors must implement and maintain a quality system compliant with ISO-9001 (or MIL-I-45208 as an alternate), with calibration systems per ISO-10012, ANSI-Z540.3, and ISO-17025. The quality system and products are subject to government evaluation, verification, and inspection. Suppliers of Level I/SUBSAFE material must submit documented quality system procedures to the PCO prior to award, unless already on file.
Inspection and acceptance will be performed at the source, with government quality assurance representatives (DCMA QAR) involved. All inspection records, test reports, and certification data must be traceable to the material and available for government review. Subcontractor inspection requirements are detailed, ensuring quality control throughout the supply chain.
Packaging, preservation, and marking must comply with MIL-STD-2073 and contract-specific requirements. Traceability marking is required for all fasteners, including material symbol, manufacturer identification, and unique traceability codes, applied per MIL-STD-792 and MIL-DTL-1222.
Contracting Entity and Contact Information:
The contracting entity is NAVSUP Weapon Systems Support Mechanicsburg, a federal office under the Department of Defense, Department of the Navy. The primary point of contact is Lydia M. Shaloka, reachable at 215-697-4717 or via email at [email protected]. Certification data must be submitted to Portsmouth Naval Shipyard (DODAAC N50286) for review and acceptance prior to shipment, using the Wide Area Work Flow (WAWF) system, with notification to [email protected].
Procurement Type and Special Considerations:
This solicitation is a fixed-price procurement, issued under Emergency Acquisition Flexibilities. It is a combined solicitation for multiple related items, with awards determined at the Contract Line Item Number (CLIN) level. Multiple awards may be made to different vendors, and offerors may respond to any or all CLINs. Quantity discounts for combined CLINs are discouraged, as awards may be made for individual CLINs only.
The proposed delivery schedule requires submission of all certification data 20 days prior to delivery, with final material delivery within 365 days. Early and incremental deliveries are acceptable at no additional cost to the government. Past performance will be considered in the evaluation of offers.
Constant Elements:
Throughout the contract lifecycle, the requirements for traceability, certification, quality assurance, configuration control, and compliance with specified standards and procedures will remain unchanged. The critical nature of the material, the need for rigorous documentation and inspection, and the prohibition of material substitutions are enduring features of this procurement.
Summary for Contractors:
This opportunity is suited for small business manufacturers with demonstrated capability in producing high-integrity fasteners for critical applications, robust quality systems, and experience with military standards and traceability requirements. Contractors must be prepared to meet stringent certification, inspection, and documentation standards, and to engage in close coordination with government quality assurance representatives. The solicitation offers flexibility in CLIN participation and delivery, but demands unwavering compliance with technical and quality requirements to ensure the safety and reliability of naval shipboard systems.
For further details and to access the solicitation, visit the official notice at https://sam.gov/opp/d84fa1b96079488f8b96274c914c14ba/view.