59--CONNECTOR,ELECTRIC

Key Dates
Due Date

-

Posted Date

-

Agency & Value
Agency

NAVSUP WEAPON SYSTEMS SUPPORT MECH

Contract Value

Not provided

Codes & Classification
Solicitation Number

N0010426RFE40

NAICS

335931 - Current-Carrying Wiring Device Manufacturing

Classification Code

5935

Additional Details
Set Aside

None

Place of Performance

-

SourceSAM
Documents1
The Department of the Navy, through NAVSUP Weapon Systems Support Mechanicsburg (NAVSUP WSS MECH), has issued a solicitation (Procurement Identifier: N0010426RFE40) for the supply of a specialized electric connector assembly, classified under Product Service Code 5935 (Connectors, Electrical) and NAICS Code 335931 (Current-Carrying Wiring Device Manufacturing). This procurement is critical in nature, supporting a vital shipboard system where material failure could result in severe consequences, including personnel injury, loss of life, or significant damage to naval assets. As such, the connector assembly is designated as SPECIAL EMPHASIS material (Level I, Scope of Certification, or Quality Assured), invoking stringent control and quality assurance procedures. **Purpose and Scope** The primary objective of this solicitation is to acquire an electrical connector assembly that meets the rigorous standards required for use in crucial naval shipboard systems. The assembly must be manufactured in strict accordance with detailed Naval Sea Systems Command (NAVSEA) drawings and specifications, including but not limited to Drawing 7349938, Parts List PL7349938, MIL-DTL-24231, and associated Notices of Revision. The contract encompasses the full lifecycle of the product, from material sourcing and manufacturing through testing, certification, and final delivery. **Key Requirements and Deliverables** - **First Article Testing (FAT):** Both contractor and government first article testing are required. The contractor must conduct destructive testing on a cable specimen, and deliver a separate electrical connector assembly to Portsmouth Naval Shipyard for government testing, in accordance with MIL-DTL-24231 for Type III connectors. FAT approval is a prerequisite for production acceptance. - **Material and Process Control:** All materials, particularly those used in pressure-retaining and safety-critical components, must be traceable to their original certification data. Specific parts require quantitative chemical and mechanical analysis, and all fasteners must be heat treated per QQ-N-286 and marked for traceability. - **Testing and Certification:** Comprehensive testing is mandated, including production tests, dye and liquid penetrant inspections, ultrasonic inspections, wedge tensile tests, and quality conformance inspections. Certifications for each test must be provided, referencing applicable standards and acceptance criteria. - **Quality Assurance:** The contractor must maintain a quality system compliant with ISO-9001 (or MIL-I-45208 as an alternate), with calibration systems per ISO-10012 or ANSI-Z540.3/ISO-17025. Government source inspection at the contractor’s facility is required, and the contractor’s quality system is subject to government audit and approval. - **Configuration and Change Control:** The contractor is responsible for maintaining configuration control and must submit engineering change proposals (ECPs) for any modifications affecting form, fit, function, or interface. All waivers and deviations require contracting officer approval. - **Documentation and Traceability:** Certificates of compliance, test certifications, and material traceability documentation are required for all deliverables. Marking and traceability requirements are extensive, ensuring that each item can be traced back to its material and process history. - **Packaging:** Preservation, packaging, and marking must comply with MIL-STD-2073 and contract-specific requirements. - **Special Provisions:** The use of mercury or mercury-containing compounds is strictly prohibited. Thread lubricants containing molybdenum disulfide are not allowed; anti-galling compound A-A-59004 must be used instead. **Contracting Entity and Contact Information** - **Contracting Office:** NAVSUP Weapon Systems Support Mechanicsburg (NAVSUP WSS MECH) - **Department:** Department of Defense, Department of the Navy - **Primary Contact:** Lydia M. Shaloka, Telephone: 215-697-4717, Email: [email protected] **Location and Delivery** - **Inspection and Acceptance:** Government source inspection at the contractor’s facility; first article government testing at Portsmouth Naval Shipyard, Kittery, Maine. - **FOB:** Destination **Procurement Type and Special Considerations** - **Contract Type:** Fixed-price - **Set-Aside:** Not specified in the notice - **DPAS Rating:** This is a “DO” rated order under the Defense Priorities and Allocations System (DPAS), certified for national defense use. - **Emergency Acquisition Flexibilities (EAF):** The order is issued under EAF provisions. - **Submission Requirements:** The complete RFP package must be signed and returned prior to the closing date. Emailed or faxed proposals are acceptable; NECO quotes are not accepted. **Schedule and Timeline** - **Solicitation Closing Date:** 10 September 2026 (as amended) - **Response Deadline:** 27 November 2026, 18:11 - **Delivery Schedule:** Certification data due 20 days prior to scheduled delivery; FAT report due 180 days after PR approval; final delivery of material within 365 days of contract effective date. **Summary for Contractors** This solicitation represents a highly specialized and demanding opportunity for manufacturers with proven experience in producing critical safety items for naval applications. The contract requires strict adherence to technical specifications, comprehensive quality assurance, and robust documentation and traceability practices. Contractors must be prepared to undergo rigorous government oversight, including source inspection and first article testing, and must maintain the capability to manage configuration control and respond to engineering changes throughout the contract lifecycle. Only those firms with established quality systems, experience in Level I/SUBSAFE material production, and the ability to meet the Navy’s stringent requirements should consider responding to this solicitation. For further details, including access to drawings and attachments, interested parties should refer to the official notice on SAM.gov (Opportunity ID: 9186b40952e344bbaa27aa130453379a) and contact the primary point of contact as listed above.