KEEL, COOLER

Key Dates
Due Date

-

Posted Date

-

Agency & Value
Agency

SFLC PROCUREMENT BRANCH 2(00085)

Contract Value

Not provided

Codes & Classification
Solicitation Number

70Z08526Q40161B00

NAICS

332510 - Hardware Manufacturing

Classification Code

2040

Additional Details
Set Aside

SBA

Place of Performance

Curtis Bay, Maryland, UNITED STATES

SourceSAM
Documents2
The United States Coast Guard, under the Department of Homeland Security, has issued a solicitation for the procurement of keel coolers, as detailed in notice 70Z08526Q40161B00. This opportunity is managed by the SFLC Procurement Branch 2 (00085), a federal office located in Curtis Bay, Maryland. The procurement is classified under NAICS code 332510 (Hardware Manufacturing), with the relevant Product Service Code being 2040. The primary objective of this solicitation is to acquire twelve (12) units of the Duracooler keel cooler, part number SC-418DP-114, for use at the Curtis Bay facility. Each cooler must conform to the following specifications: an overall length of 121-1/4 inches, width of 16-7/16 inches, and a projection from the hull to the bottom of the zinc electrode of 4-15/16 inches. The inlet and outlet piping connections are specified as 3-inch NPS nozzles, both located 3-5/8 inches from the same end of the cooler. The cooling circuit is single, with a heat rejection capacity of 26,012.28 BTU per minute and a fresh water flow rate of 120.2 gallons per minute. The cooler is designed to operate with a raw water flow past the cooler tubes at 3 knots and a maximum sea water temperature of 85 degrees Fahrenheit. The material requirement is copper-nickel, ensuring durability and corrosion resistance in marine environments. Each keel cooler must be preserved according to OEM standards and individually packed in its own wooden box. Marking must comply with MIL-STD-129R and utilize ISO/IEC-16388-2007 Code 39 symbology for barcoding. Contractors are advised to review the attached documents for further details and requirements. This procurement is set aside for SBA-qualified entities, indicating a preference for small business participation. The place of performance is Curtis Bay, Maryland, and the contract will remain active throughout its lifecycle at this location. Interested contractors should direct inquiries to the primary contact, Christopher Huertas-Rolon ([email protected], 410-354-1926), or the secondary contact, Daniel J. Nieves ([email protected], 410-762-6696). The solicitation was posted on January 6, 2026, and responses are due by December 6, 2026. The opportunity remains active and can be accessed via the SAM.gov portal at https://sam.gov/opp/cc94e93416cf4b7b8613c4c433b0b8d2/view. Contractors with expertise in hardware manufacturing, particularly those capable of producing copper-nickel marine cooling equipment to precise specifications and packaging standards, are encouraged to evaluate this opportunity. The requirements for preservation, packaging, and marking are integral to the deliverables and will remain constant throughout the contract lifecycle. SBA set-aside eligibility and compliance with federal marking standards are essential considerations for prospective bidders.