STEM,FLUID VALVE
Key Dates
Due Date
-
Posted Date
-
Agency & Value
Agency
NAVSUP WEAPON SYSTEMS SUPPORT MECH
Contract Value
Not provided
Codes & Classification
Solicitation Number
N0010426QZB39
NAICS
332919 - Other Metal Valve and Pipe Fitting Manufacturing
Classification Code
4820
Additional Details
The Department of the Navy, through the Naval Supply Systems Command (NAVSUP) Weapon Systems Support office in Mechanicsburg, PA, has issued a solicitation (Procurement Identifier: N0010426QZB39) for the procurement of a STEM for a fluid valve, specifically a stem for a 1/4 inch globe valve. This procurement is classified under NAICS code 332919 (Other Metal Valve and Pipe Fitting Manufacturing) and Product Service Code 4820. The opportunity is a total small business set-aside, inviting qualified small business manufacturers and suppliers to participate.
**Purpose and Scope**
The primary objective of this procurement is to acquire stems for 1/4 inch globe valves that are integral to crucial shipboard systems. The material is designated as SPECIAL EMPHASIS material (Level I, Scope of Certification, or Quality Assured), reflecting its criticality: failure or defects could result in serious personnel injury, loss of life, or catastrophic failure of vital shipboard systems. As such, the procurement invokes stringent quality assurance, traceability, and certification requirements to ensure the highest standards of safety and reliability.
**Key Requirements and Deliverables**
- **Technical Specifications:** The stem must be manufactured in accordance with NAVSEA drawing 803-6397434, part number 803-6397434-X11XXX-012, with specific amplifications and modifications as detailed in the solicitation. No weld repairs are allowed on MIL-DTL-24252 material.
- **Material and Testing:** The stem must be fabricated from MIL-DTL-24252, Composition 1, Condition A material. Quantitative chemical and mechanical analysis is required, and ultrasonic inspection must be performed per MIL-STD-2132 and MIL-DTL-24252. The original melter/converter must be qualified per MIL-DTL-24252.
- **Thread and Surface Inspection:** All threads must be inspected per FED-STD-H28 or ASME B1 series. O-ring grooves and sealing surfaces must be inspected per contractually invoked drawings/specifications, with repairs subject to strict controls.
- **Certification and Traceability:** Contractors must provide a Certificate of Compliance, ensuring all items meet the procurement document requirements. Full traceability from material to certification test reports is mandatory, with unique traceability markings applied to each item.
- **Quality System:** Contractors must maintain a quality system compliant with ISO-9001 (or MIL-I-45208 as an alternate), with calibration systems per ISO-10012 or ANSI-Z540.3/ISO-17025. The quality system and procedures are subject to government review and audit.
- **Government Source Inspection:** Government Quality Assurance at source is required. Contractors must notify the appropriate government representative or DCMA office upon receipt of the order.
- **Packaging:** Preservation, packaging, and marking must comply with MIL-STD-2073 and contract-specific requirements.
- **Data and Documentation:** Certification data must be submitted to Portsmouth Naval Shipyard for review and acceptance prior to shipment, via the Wide Area Work Flow (WAWF) system. No material may be shipped before acceptance is received.
**Contracting Entity and Contact Information**
- **Contracting Office:** NAVSUP Weapon Systems Support (WSS) Mechanicsburg
- **Department:** Department of Defense, Department of the Navy
- **Primary Contact:** Michael E. Thoman, Telephone: 717-605-4608, Email: [email protected]
**Procurement Type and Special Considerations**
This is a fixed-price solicitation, issued as a total small business set-aside. The procurement is a rated order certified for national defense use under the Defense Priorities and Allocations System (DPAS), requiring contractors to comply with all DPAS regulations. The award will be bilateral, requiring written acceptance by the contractor prior to execution. Past performance will be considered in the evaluation of offers.
Partial and early deliveries are authorized and encouraged, provided there is no additional cost to the government. All contractual documents and communications will be managed electronically, and the government’s acceptance of the contractor’s proposal constitutes bilateral agreement to issue contractual documents as detailed.
**Applicable Standards and References**
The solicitation references a comprehensive set of military, federal, and industry standards, including but not limited to:
- NAVSEA drawings and specifications
- FED-STD-H28, ANSI/ASQ Z1.4, MIL-STD-792, MIL-STD-2132, MIL-DTL-24252, MIL-I-45208, MIL-STD-45662, ANSI/NCSL Z540.3, ISO-9001, ISO-10012, ISO/IEC 17025
**Constant Elements Over Contract Lifecycle**
Throughout the contract, the following elements will remain constant:
- The requirement for strict adherence to technical specifications and quality assurance protocols
- The necessity for full traceability and certification of materials and processes
- The obligation to maintain and document a compliant quality system, subject to government oversight
- The use of electronic systems (WAWF, ECDS) for data submission and contract administration
- The critical safety and national defense implications of the supplied material
**Summary for Contractors**
This opportunity is suited for small businesses with demonstrated expertise in precision manufacturing of critical shipboard components, robust quality assurance systems, and the ability to comply with rigorous traceability and certification requirements. Contractors must be prepared for government source inspection, maintain detailed records, and ensure all deliverables meet the highest standards of safety and reliability. The procurement supports national defense priorities and requires strict compliance with all applicable regulations and standards.
Interested parties should review the full solicitation and referenced documents, and direct any technical or contractual inquiries to the primary contact listed above. The response deadline is June 30, 2026.
For more information and to access the solicitation, visit: [SAM.gov Opportunity](https://sam.gov/opp/87befeb0687b4329b1cf9bdb0b9d37a7/view).