48--VALVE,RELIEF,PRESSU

Key Dates
Due Date

-

Posted Date

-

Agency & Value
Agency

NAVSUP WEAPON SYSTEMS SUPPORT MECH

Contract Value

Not provided

Codes & Classification
Solicitation Number

N0010426QNC66

NAICS

332919 - Other Metal Valve and Pipe Fitting Manufacturing

Classification Code

4820

Additional Details
Set Aside

None

Place of Performance

-

SourceSAM
The Department of the Navy, through NAVSUP Weapon Systems Support Mechanicsburg (NAVSUP WSS MECH), has issued a high-priority solicitation (N0010426QNC66) for the procurement of a Relief Valve Assembly, classified under Product Service Code 4820 (Valves, Nonpowered) and NAICS 332919 (Other Metal Valve and Pipe Fitting Manufacturing). This procurement is integral to the Level One program, supporting critical shipboard systems where material failure could result in catastrophic consequences, including personnel injury, loss of life, or loss of vital shipboard systems. **Purpose and Scope** The Relief Valve Assembly is designated as SPECIAL EMPHASIS material, requiring stringent quality assurance and control procedures to ensure the correct and defect-free supply. The assembly contains non-metallic materials and must meet the toxicity and flammability requirements of NAVSEA SS800-AG-MAN-010/P-9290. The procurement is rated DO under the Defense Priorities and Allocation System (DPAS), reflecting its national defense and emergency preparedness significance. **Key Requirements and Deliverables** - **Technical Compliance:** The Relief Valve Assembly must conform to Vacco drawing V3D10437, part number V3D10437-03, with all modifications and amplifications as specified in the solicitation. - **Oxygen Cleaning:** The item requires cleaning, testing, packaging, and labeling by trained personnel in accordance with MIL-STD-1330. - **Material Certification:** Quantitative chemical and mechanical analysis is required for specific parts, notably the valve body (SAE AMS 5643, Condition H-1025). - **Testing and Certification:** Each valve must undergo production testing per the acceptance test procedure developed from the referenced drawing. Certifications for performance and non-destructive tests (weld repair/production welds) are mandatory. - **Spring Setting and Pressure Tolerance:** Each valve must be tested at both the highest and lowest relief settings, with pressure and time tolerances strictly defined. - **Inspection and Acceptance:** Inspection and acceptance will occur at the origin, with Government Quality Assurance performed at source. Partial and early delivery is authorized and encouraged at no additional cost. - **Traceability:** Rigorous traceability and certification requirements are imposed, including unique marking, maintenance of records, and compliance with DI-MISC-81020. - **Quality System:** Contractors must maintain a quality system compliant with ISO-9001 (or MIL-I-45208 as an alternate), with calibration systems per ISO-10012 or ANSI-Z540.3/ISO-17025. - **Configuration Control:** Contractors are responsible for maintaining baseline configuration and must submit Engineering Change Proposals (ECPs) for any modifications affecting form, fit, function, or interface parameters. - **Subcontractor Management:** All requirements, including quality assurance and traceability, must be flowed down to sub-tier suppliers and subcontractors. - **Packaging:** Preservation, packaging, packing, and marking must comply with MIL-STD 2073 and contract schedule requirements. - **Mercury-Free:** No mercury or mercury-containing compounds may be used or come into contact with supplied hardware. **Contracting Entity and Contact Information** - **Entity:** NAVSUP Weapon Systems Support Mechanicsburg (NAVSUP WSS MECH), Department of the Navy, Department of Defense - **Primary Contact:** Stephen A. Knox, Telephone: 717-605-6805, Email: [email protected] - **Location:** Mechanicsburg, PA - **Notice URL:** [SAM.gov Opportunity](https://sam.gov/opp/19d94b78fb0f4657970508c4c4627556/view) **Procurement Type and Special Considerations** - **Solicitation Type:** Emergency Acquisition Flexibilities (EAF) are invoked, reflecting the urgent and critical nature of the requirement. - **Priority Rating:** DO-rated order for national defense. - **Set-Aside:** No specific set-aside is indicated; however, compliance with Buy American, Free Trade Agreements, and Balance of Payments Program requirements is required. - **Source Certification:** Level I Source Certification is mandatory. - **Data Submission:** Certification data must be submitted to Portsmouth Naval Shipyard for review and acceptance prior to shipment, via Wide Area Work Flow (WAWF). No material may be shipped before acceptance is received. **Constant Elements Throughout Contract Lifecycle** - The requirement for rigorous quality assurance, traceability, and configuration control will persist throughout the contract. - All documentation, certifications, and compliance records must be maintained and made available for government review. - Subcontractor oversight and flow-down of requirements are mandatory. - The contract will remain subject to DPAS priority rating and emergency acquisition flexibilities. **Summary for Contractors** This solicitation represents a critical opportunity for manufacturers specializing in high-reliability valve assemblies for defense applications. Contractors must demonstrate robust quality systems, proven traceability processes, and the ability to comply with stringent technical, testing, and certification requirements. The procurement is urgent, with partial and early deliveries encouraged, and is subject to national defense priority. Interested parties should review the technical requirements, quality assurance provisions, and data submission protocols carefully to ensure alignment with their capabilities and compliance infrastructure. For further information or to submit a response, contact Stephen A. Knox at NAVSUP WSS MECH. The response deadline is November 27, 2026.