TAILPIECE,VALVE
Key Dates
Due Date
-
Posted Date
-
Agency & Value
Agency
NAVSUP WEAPON SYSTEMS SUPPORT MECH
Contract Value
Not provided
Codes & Classification
Solicitation Number
N0010426QNC61
NAICS
332919 - Other Metal Valve and Pipe Fitting Manufacturing
Classification Code
4820
Additional Details
The Department of the Navy, through NAVSUP Weapon Systems Support (NAVSUP WSS) Mechanicsburg, has issued a solicitation (Procurement Identifier: N0010426QNC61) for the supply of a TAILPIECE, VALVE, classified under Product Service Code 4820 (Valves, Nonpowered) and NAICS Code 332919 (Other Metal Valve and Pipe Fitting Manufacturing). This procurement is a Total Small Business Set-Aside, inviting qualified small business manufacturers and suppliers to participate.
**Purpose and Scope**
The primary objective of this procurement is to acquire a 1/2 inch TailPiece in strict accordance with Buships drawing 1385884, Piece 6, for use in a critical shipboard system. The item is designated as SPECIAL EMPHASIS material (Level I, Scope of Certification, or Quality Assured), reflecting its essential role in ship safety and operational integrity. The use of incorrect or defective material could result in catastrophic failure, serious injury, loss of life, or loss of vital shipboard systems. As such, the procurement invokes rigorous quality assurance and configuration control procedures to ensure the delivery of compliant, traceable, and certified material.
**Key Requirements and Deliverables**
- **Technical Compliance:** The TailPiece must conform to Buships drawing 1385884, Piece 6, with material specified as MIL-C-24679, alloy C71500. All applicable documents, drawings, and specifications are referenced and must be obtained and adhered to by the contractor.
- **Certification and Traceability:** Quantitative chemical and mechanical analysis is required, with full traceability from the material to certification test reports. Certifications for non-destructive tests (NDT) on weld repairs and/or production welds are mandatory, as per the applicable fabrication specifications.
- **Quality Assurance:** Contractors must maintain a quality system compliant with ISO-9001 (or MIL-I-45208 as an alternate), with calibration systems per ISO-10012 or ANSI-Z540.3/ISO-17025. The quality system and products are subject to government evaluation, verification, and source inspection.
- **Configuration Control:** Contractors are responsible for maintaining the total equipment baseline configuration and must submit Engineering Change Proposals (ECPs) for any modifications affecting form, fit, function, or interface parameters.
- **Documentation:** A Certificate of Compliance (C of C) is required, certifying full compliance with all specifications and requirements, and must show traceability to the marking applied on each item. Test certifications, inspection records, and material certification data must be submitted via Wide Area Work Flow (WAWF) and accepted by Portsmouth Naval Shipyard prior to shipment.
- **Packaging:** Preservation, packaging, packing, and marking must comply with MIL-STD-2073 and contract-specific requirements.
- **Special Controls:** Mercury and mercury-containing compounds are strictly prohibited. All waivers and deviations require contracting officer approval. Subcontractor quality and traceability controls must be robust and documented.
**Contracting Entity and Contact Information**
- **Contracting Office:** NAVSUP Weapon Systems Support Mechanicsburg (NAVSUP WSS MECH)
- **Department/Agency:** Department of Defense, Department of the Navy
- **Primary Contact:** James E. Lewis, Email: [email protected], Telephone: 717-605-7403
**Procurement Type and Special Considerations**
This is a fixed-price solicitation, issued under Emergency Acquisition Flexibilities (EAF), and will result in a bilateral award requiring written contractor acceptance. The contract will be DO certified for national defense under the Defense Priorities and Allocations System (DPAS), indicating its priority for national defense, emergency preparedness, and energy program use. The procurement is set aside exclusively for small businesses, and compliance with the Cybersecurity Maturity Model Certification (CMMC) requirements is anticipated.
**Evaluation Criteria**
NAVSUP WSS will consider past performance in the evaluation of offers. All contractual documents will be issued electronically, and the government’s acceptance of the contractor’s proposal constitutes bilateral agreement.
**Constant Elements Over Contract Lifecycle**
- The requirement for strict adherence to technical drawings, specifications, and quality assurance standards will remain unchanged.
- The need for traceability, certification, and configuration control is constant, reflecting the critical safety nature of the item.
- All documentation, inspection, and acceptance procedures, including the use of WAWF and government source inspection, will persist throughout the contract.
- The prohibition of mercury and the requirement for robust subcontractor controls are enduring.
- The contract’s status as a Total Small Business Set-Aside and its DPAS rating will not change.
**Summary for Contractors**
This opportunity is suited for small business manufacturers with proven capabilities in precision metal valve and pipe fitting production, robust quality assurance systems, and experience with Level I/SUBSAFE or SPECIAL EMPHASIS Navy material. Contractors must be prepared to meet stringent certification, traceability, and documentation requirements, and to support government source inspection and configuration control processes. The contract’s critical safety designation and DPAS rating underscore the importance of compliance and reliability in all deliverables.
Interested parties should review the full solicitation and referenced documents, and direct any technical or contractual inquiries to the primary contact listed above. The response deadline is June 29, 2026.
For more information and to access the solicitation, visit: [SAM.gov Opportunity](https://sam.gov/opp/6ee77e7fe8e54c82aa07de8fa70742d9/view)