WASHER
Key Dates
Due Date
-
Posted Date
-
Agency & Value
Agency
NAVSUP WEAPON SYSTEMS SUPPORT MECH
Contract Value
Not provided
Codes & Classification
Solicitation Number
N0010426QFE08
NAICS
332722 - Bolt, Nut, Screw, Rivet, and Washer Manufacturing
Classification Code
5310
Additional Details
The Department of the Navy, through NAVSUP Weapon Systems Support Mechanicsburg (NAVSUP WSS MECH), has issued a solicitation (Procurement Identifier: N0010426QFE08) for the manufacture and supply of a washer, classified under Product Service Code 5310 and NAICS Code 332722 (Bolt, Nut, Screw, Rivet, and Washer Manufacturing). This procurement is a total small business set-aside, inviting qualified small business manufacturers to participate.
**Purpose and Scope**
The washer to be procured is a critical component intended for use in a crucial shipboard system. Due to its application, the material is designated as SPECIAL EMPHASIS material (Level I, Scope of Certification, or Quality Assured), requiring stringent control procedures to ensure the correct and defect-free supply. The failure or incorrect supply of this item could result in serious personnel injury, loss of life, loss of vital shipboard systems, or even loss of the ship itself. As such, the procurement is governed by rigorous quality assurance and traceability requirements.
**Key Requirements and Objectives**
- **Manufacturing Standards:** The washer must be manufactured in accordance with NAVSEA drawing 167-7384258 Find 099, with any amplifications or modifications specified in the solicitation.
- **Certification and Compliance:** Contractors must submit a certificate of compliance certifying adherence to all procurement requirements, specifications, and drawings. Traceability from material to Objective Quality Evidence (OQE) is mandatory.
- **Configuration Control:** Contractors are required to maintain baseline configuration and submit any waivers, deviations, or engineering change proposals (ECPs) for government review and approval.
- **Quality System:** A quality system compliant with ISO-9001 (or MIL-I-45208 as an alternate), with calibration system requirements per ISO-10012 or ANSI-Z540.3 with ISO-17025, is required. The system and products are subject to government evaluation and audit.
- **Inspection and Acceptance:** Government Quality Assurance at source is mandated. Contractors must maintain inspection records, make test equipment available for government use, and ensure all documents are accessible for review.
- **Subcontractor Oversight:** The government reserves the right to inspect supplies or services at subcontractor facilities, with appropriate quality system requirements cited in purchase documents.
- **Material Traceability:** Permanent traceability markings per MIL-STD-792 are required, maintained through all process operations, including subcontracted work.
- **Final Inspection:** Prior to government acceptance, material must be inspected for form, fit, and function, with lot acceptance based on zero defects. All OQE and traceability data must be 100% inspected.
- **Mercury-Free Requirement:** No mercury or mercury-containing compounds may be used or come into contact with supplied hardware.
- **Packaging:** Preservation, packaging, packing, and marking must comply with MIL-STD 2073 and contract schedule requirements.
**Expected Deliverables**
- Washers manufactured to NAVSEA drawing specifications
- Certificate of compliance with traceability information
- Inspection and test plan (unless waived)
- Configuration control documentation (as required)
- Quality system procedures (unless already on file)
- Packaging compliant with MIL-STD 2073
**Contracting Entity and Contact Information**
- **Entity:** NAVSUP Weapon Systems Support Mechanicsburg (NAVSUP WSS MECH)
- **Department:** Department of Defense, Department of the Navy
- **Location:** Mechanicsburg, PA
- **Primary Contact:** Ashton K. Perry, Telephone: 717-605-7574, Email: [email protected]
**Procurement Type and Special Considerations**
- **Solicitation Type:** Fixed-price contract
- **Set-Aside:** Total small business set-aside
- **DPAS Rating:** Any contract awarded will be DO certified for national defense under the Defense Priorities and Allocations System (DPAS).
- **Inspection and Acceptance:** No material is to be shipped prior to government acceptance. Certification documentation must be submitted to Portsmouth Naval Shipyard for review and acceptance prior to each shipment, via Wide Area Work Flow (WAWF).
- **Drawings Access:** Drawings are available on SAM.gov with restricted access; vendors must request access and notify the POC.
- **Security and Export Controls:** Distribution of technical documents is controlled per OPNAVINST 5510.1, with several distribution statement codes applicable.
**Constant Elements Throughout Contract Lifecycle**
- Adherence to NAVSEA drawing and invoked specifications
- Maintenance of quality system and traceability
- Government source inspection and acceptance procedures
- Compliance with packaging and mercury-free requirements
- Submission of certification and compliance documentation
- Configuration control and change management protocols
**Summary for Contractors**
This opportunity is highly specialized, requiring manufacturers with robust quality assurance systems, experience in critical shipboard components, and the ability to comply with stringent traceability and certification requirements. The contract is a fixed-price, total small business set-aside, and will be rated for national defense priority. Interested parties should review the technical requirements, ensure access to restricted drawings, and be prepared for comprehensive government oversight throughout the contract lifecycle. For further information or to request access to drawings, contact Ashton K. Perry at the provided email or phone number.
For full solicitation details and updates, visit the official notice at [SAM.gov](https://sam.gov/opp/bce937b02dc143ccbb74c5174d3c910b/view).