TUBING,NONMETALLIC
Key Dates
Due Date
-
Posted Date
-
Agency & Value
Agency
NAVSUP WEAPON SYSTEMS SUPPORT MECH
Contract Value
Not provided
Codes & Classification
Solicitation Number
N0010426QFA67
NAICS
332919 - Other Metal Valve and Pipe Fitting Manufacturing
Classification Code
4820
Additional Details
The Department of the Navy, through NAVSUP Weapon Systems Support Mechanicsburg (NAVSUP WSS), has issued a solicitation for the procurement of nonmetallic tubing, specifically MC 903 Nylon Tube for ball valve seat/seal material, under procurement identifier N0010426QFA67. This material is intended for use in a critical shipboard system, where the integrity and reliability of components are paramount due to the potential for catastrophic failure, serious injury, or loss of vital shipboard systems. As such, the tubing is designated as SPECIAL EMPHASIS material (Level I, Scope of Certification, or Quality Assured), invoking rigorous control procedures to ensure the correct material is received and installed.
**Scope and Purpose**
The contract covers the supply of MC 903 Nylon Tube, manufactured in accordance with Electric Boat Division Specification 2000 or equivalent, for use as ball valve seat/seal material. The required tube dimensions are: outside diameter of 19.000 inches, inside diameter of 13.5 inches, and length of 13 inches, with tolerances specified in E.B. SPEC 2000. The material must be MC903 (Type 6 cast nylon produced with polyepsilon caprolactam by direct polymerization), as manufactured by the Polymer Corporation or equivalent, and must meet stringent physical and chemical property requirements, including melting point, relative viscosity, specific gravity, dimensional change, tensile impact, tensile yield stress, compressive strength, water absorption, and Rockwell hardness, as detailed in the solicitation.
**Key Requirements and Deliverables**
- **Material Certification and Traceability:** The contractor must provide quantitative chemical and mechanical analysis for each batch, with certification data uniquely traceable to the material via heat-lot or batch numbers. Permanent marking (except for Teflon seats) is required in accordance with MIL-STD-792, ensuring traceability to Objective Quality Evidence (OQE).
- **Quality Assurance:** The contractor must maintain a quality system compliant with ISO-9001, ISO-10012, ANSI-Z540.3, and ISO-17025, or MIL-I-45208. The system and products are subject to government evaluation, verification, and inspection. Suppliers of Level I/SUBSAFE material must submit documented quality system procedures prior to contract award, unless already on file.
- **Inspection and Acceptance:** Government Quality Assurance will be performed at the source, and the contractor must facilitate access for government representatives. Inspection records must be maintained and traceable to the material inspected. Subcontractor inspection requirements are also specified, including periodic audits and compliance verification.
- **Configuration Control:** The contractor is responsible for maintaining the equipment baseline configuration and must submit Engineering Change Proposals (ECPs) for any modifications affecting form, fit, function, or interface parameters.
- **Mercury-Free Requirement:** No mercury or mercury-containing compounds may be intentionally added or come into contact with supplied hardware.
- **Packaging:** Preservation, packaging, packing, and marking must comply with MIL-STD 2073 and contract schedule requirements.
- **Certificate of Compliance:** A certificate must be submitted for each shipment, showing traceability to the marking applied on each item and certifying compliance with all specifications and requirements.
- **Delivery Schedule:** Certification data must be submitted at least 20 days prior to scheduled delivery, with review and acceptance by Portsmouth Naval Shipyard (PNSY) within 45 working days. Final delivery of material is required within 365 days of contract effective date, with early and incremental delivery accepted at no additional cost.
**Contracting Entity and Contact Information**
- **Contracting Office:** NAVSUP Weapon Systems Support Mechanicsburg (NAVSUP WSS)
- **Department:** Department of Defense, Department of the Navy
- **Primary Contact:** Amanda L. Bailey, Telephone: 717-605-3354, Email: [email protected]
- **Location:** Mechanicsburg, PA
- **DODAAC:** N50286 (Portsmouth NSY)
- **Notice URL:** [SAM.gov Opportunity](https://sam.gov/opp/eb0bb19d506949a197c2df26a9b508a7/view)
**Classification and Procurement Details**
- **NAICS Code:** 332919 (Other Metal Valve and Pipe Fitting Manufacturing)
- **Product Service Code:** 4820
- **Procurement Type:** Solicitation
- **Set-Aside:** Total Small Business Set-Aside
- **DPAS Rating:** DX (certified for national defense use)
- **Special Considerations:** Emergency Acquisition Flexibilities (EAF) apply; past performance will be considered in offer evaluation; access to drawings may require request via SAM.gov and follow-up with the primary POC.
**Submission and Review Process**
- **Response Due Date:** 18 June 2026
- **Submission Instructions:** Certification documentation must be submitted via Wide Area Work Flow (WAWF) for review and acceptance by Portsmouth Naval Shipyard prior to shipment. No material may be shipped before acceptance is received.
**Constant Elements Throughout Contract Lifecycle**
- The requirement for traceability, certification, and compliance with quality assurance standards will remain constant.
- The material’s designation as SPECIAL EMPHASIS and its critical role in shipboard systems will continue to drive rigorous control and inspection requirements.
- Configuration control, government inspection, and the prohibition of mercury will persist as ongoing contract obligations.
- The contract will maintain its DX priority rating and small business set-aside status.
**Summary for Contractors**
This solicitation represents a highly specialized and critical procurement for nonmetallic tubing used in naval shipboard systems. Contractors must demonstrate robust quality assurance systems, the ability to provide detailed material certification and traceability, and compliance with stringent technical and packaging requirements. The opportunity is set aside for small businesses and is rated as a DX priority for national defense, underscoring the importance of timely and reliable delivery. Interested parties should carefully review the technical specifications, quality system requirements, and submission instructions to ensure alignment with their capabilities and readiness to meet the Navy’s exacting standards.
For further information or to request access to solicitation documents, contact Amanda L. Bailey at the provided email or phone number.