ADAPTER ASSEMBLY
Key Dates
Due Date
-
Posted Date
-
Agency & Value
Agency
NAVSUP WEAPON SYSTEMS SUPPORT MECH
Contract Value
Not provided
Codes & Classification
Solicitation Number
N0010426QFE04
NAICS
332919 - Other Metal Valve and Pipe Fitting Manufacturing
Classification Code
4730
Additional Details
The Department of the Navy, through the Naval Supply Systems Command (NAVSUP) Weapon Systems Support office in Mechanicsburg, PA, has issued a solicitation (Procurement Identifier: N0010426QFE04) for the manufacture and delivery of an Adapter Assembly. This procurement is classified under NAICS code 332919 (Other Metal Valve and Pipe Fitting Manufacturing) and Product Service Code 4730, indicating its relevance to contractors specializing in precision metal components for shipboard systems.
**Purpose and Scope**
The Adapter Assembly is a critical component intended for use in a vital shipboard system. The solicitation underscores the essential nature of this part, designating it as SPECIAL EMPHASIS material (Level I, Scope of Certification, or Quality Assured). The failure or nonconformance of this assembly could result in severe consequences, including personnel injury, loss of life, or catastrophic failure of shipboard systems. As such, the procurement invokes stringent quality assurance, traceability, and certification requirements to ensure the highest standards of safety and reliability.
**Key Requirements and Deliverables**
- **Technical Specifications:** The Adapter Assembly must be manufactured in accordance with Electric Boat Drawing 2621-022-01, assembly 12A, sheet 12. The primary material for critical parts (specifically, the ADAPTER, piece 14A on sheet 14) is alloy C71500, conforming to MIL-C-15726.
- **Testing and Certification:** Quantitative chemical and mechanical analysis is required for specified parts. Non-destructive testing certifications are mandatory for weld repairs and production welds, with performance and acceptance per applicable fabrication specifications.
- **Thread and Welding Requirements:** All threads must be inspected per FED-STD-H28 or ASME B1 series. Internal threads must be cut, not cold-formed. Welding and brazing must comply with NAVSEA and MIL standards, with procedures and qualification data submitted for approval prior to work.
- **Configuration Control:** Contractors must maintain baseline configuration and submit any waivers, deviations, or engineering change proposals for government approval.
- **Mercury Exclusion:** No mercury or mercury-containing compounds may be used or come into contact with the assembly.
- **Traceability and Certification:** Full traceability from raw material to finished product is required, with permanent marking and comprehensive certification data. Certificates of compliance must be submitted, referencing all applicable standards, tests, and acceptance criteria.
- **Quality System:** Contractors must maintain a quality system compliant with ISO 9001 (or MIL-I-45208 as an alternate), with calibration systems per ISO 10012, ANSI-Z540.3, and ISO/IEC 17025. Government source inspection at the contractor’s facility is required.
- **Packaging:** Preservation, packaging, and marking must comply with MIL-STD-2073 and contract-specific instructions.
**Contract Administration and Submission**
- **Delivery and Acceptance:** Certification data must be submitted to Portsmouth Naval Shipyard (DODAAC N50286) for review and acceptance prior to each shipment. No material may be shipped before formal acceptance.
- **Payment and Workflow:** The Wide Area Workflow (WAWF) system is used for submission of receiving reports and invoices. Contractors must notify the Navy via designated email addresses upon submission.
- **Contract Type and Set-Aside:** This is a fixed-price solicitation, issued as a total small business set-aside, in accordance with applicable FAR and DFARS clauses. The order is DO-rated under the Defense Priorities and Allocations System (DPAS), indicating priority for national defense.
- **Past Performance:** NAVSUP WSS will consider past performance in the evaluation of offers.
- **Emergency Acquisition:** The order is issued under Emergency Acquisition Flexibilities (EAF).
**Contracting Entity and Contact Information**
- **Contracting Office:** NAVSUP Weapon Systems Support (WSS) Mechanicsburg, PA
- **Department/Agency:** Department of Defense, Department of the Navy
- **Primary Contact:** Christian M. Valdez, Telephone: 717-605-3229, Email: [email protected]
**Additional Considerations**
- **Compliance:** Contractors must adhere to all referenced military, federal, and commercial specifications and standards, as well as any invoked configuration management and quality assurance procedures.
- **Subcontracting:** Flow-down of all quality and traceability requirements to sub-tier suppliers is mandatory.
- **Security and Distribution:** Some technical documents may have restricted distribution; contractors must comply with all security and export control requirements.
**Constant Elements Over Contract Lifecycle**
Throughout the contract, the requirement for rigorous quality assurance, traceability, configuration control, and compliance with all technical and certification standards will remain unchanged. The critical safety nature of the Adapter Assembly ensures that these controls will be strictly enforced from contract award through final delivery and acceptance.
**Summary for Contractors**
This opportunity is suited for small businesses with demonstrated expertise in precision manufacturing for defense applications, robust quality management systems, and the ability to comply with complex certification and traceability requirements. Contractors must be prepared for detailed government oversight, strict adherence to technical specifications, and timely submission of all required documentation. The contract’s DO rating and emergency acquisition status further emphasize the need for reliable, responsive suppliers capable of supporting national defense priorities.
Interested parties should review the full solicitation and associated technical documents via the official SAM.gov listing (https://sam.gov/opp/eb98a67fa4ab428bb15072ae3afe2d1d/view) and direct any questions to the contracting officer listed above. The response deadline is June 15, 2026.