NUT,PLAIN,HEXAGON

Key Dates
Due Date

-

Posted Date

-

Agency & Value
Agency

NAVSUP WEAPON SYSTEMS SUPPORT MECH

Contract Value

Not provided

Codes & Classification
Solicitation Number

N0010426QFE00

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer Manufacturing

Classification Code

5310

Additional Details
Set Aside

None

Place of Performance

-

SourceSAM
The Department of the Navy, through NAVSUP Weapon Systems Support (NAVSUP WSS) Mechanicsburg, has issued a solicitation (Procurement Identifier: N0010426QFE00) for the manufacture and delivery of a critical shipboard component: the Nut, Plain, Hexagon. This procurement is classified under NAICS code 332722 (Bolt, Nut, Screw, Rivet, and Washer Manufacturing) and Product Service Code 5310, and is designated as a total small business set-aside, presenting an opportunity exclusively for qualified small business manufacturers. **Purpose and Scope** The primary objective of this solicitation is to acquire nuts that are integral to crucial shipboard systems. The use of incorrect or defective material in this application could result in catastrophic failure, including serious personnel injury, loss of life, or loss of vital shipboard systems. As such, the item is designated as SPECIAL EMPHASIS material (Level I, Scope of Certification, or Quality Assured), invoking stringent control and quality assurance procedures to ensure the highest level of reliability and traceability. **Key Requirements and Deliverables** Contractors are required to manufacture and deliver nuts conforming to the following specifications: - **Design and Material**: The nuts must meet MIL-DTL-1222 requirements, specifically: - Type I, Grade 8 (SAE J995), hardened and tempered - Size: 3/8 inch, 24 UNF thread series, Class 2B fit - Zinc plating per ASTM-B633 Type II Class 5, applied after final machining - Internal threads must be cut (cold forming is not acceptable) - Bearing surfaces must be chamfered - Marking as per MIL-DTL-1222 and MIL-STD-792, with traceability maintained throughout the process - **Testing and Certification**: - First Article Testing (FAT) is required, with contractor testing and government approval prior to full production - Proof load testing after plating and hydrogen embrittlement relief (if required) - Liquid penetrant or magnetic particle inspection (wet method) per T9074-AS-GIB-010/271 and MIL-DTL-1222 - Complete traceability and certification for chemical, mechanical, and non-destructive tests - Certificate of Compliance (C of C) for each lot, including detailed traceability and compliance statements - **Quality Assurance**: - Contractors must maintain a quality system compliant with ISO 9001 (or MIL-I-45208 as an alternate), with calibration per ISO 10012, ANSI-Z540.3, or ISO 17025 - Government Quality Assurance at source is required; place of performance may not be changed without authorization - All inspection and test records must be maintained and made available for government review - Subcontractor quality assurance and traceability requirements are strictly enforced - **Packaging and Delivery**: - Preservation, packaging, and marking must comply with MIL-STD-2073 and contract-specific requirements - Delivery schedule includes submission of certification data at least 20 days prior to scheduled delivery, FAT report within 180 days after approval, and final delivery within 365 days of contract effective date - All certification documentation must be submitted via Wide Area Work Flow (WAWF) and accepted by Portsmouth Naval Shipyard (DODAAC N50286) prior to shipment **Contracting Entity and Contact Information** - **Contracting Office**: NAVSUP Weapon Systems Support Mechanicsburg - **Department/Agency**: Department of Defense, Department of the Navy - **Primary Contact**: Lydia M. Shaloka, Telephone: 215-697-4717, Email: [email protected] - **Notice URL**: [SAM.gov Opportunity](https://sam.gov/opp/3c131f1de4bf4162a345974a9f868d24/view) **Procurement Type and Special Considerations** This is a fixed-price solicitation, issued as a total small business set-aside. The order will be rated as a "DO" order under the Defense Priorities and Allocations System (DPAS), certifying its priority for national defense use. Emergency Acquisition Flexibilities (EAF) apply, and the procurement is subject to Buy American and Free Trade Agreements provisions. Past performance will be considered in the evaluation of offers. **Additional Considerations** - The solicitation requires strict adherence to configuration control, traceability, and documentation requirements. - Any waivers or deviations must be approved by the Contracting Officer and are subject to classification as critical, major, or minor. - The nuts are classified as Critical Safety Items (CSI), and failure to meet requirements could have severe safety and operational consequences. - All documentation, including test reports and certificates, must be positive, unqualified, and directly traceable to the delivered material. - No material may be shipped prior to government acceptance of certification data. **Summary for Contractors** This opportunity is best suited for small business manufacturers with demonstrated experience in producing high-reliability, traceable fasteners for defense or similarly regulated industries. Contractors must have robust quality assurance systems, the ability to perform and document rigorous testing, and the capacity to manage detailed traceability and certification requirements. The contract’s critical safety designation and national defense priority underscore the importance of compliance and reliability throughout the contract lifecycle. Interested parties should review the full solicitation and ensure their capabilities align with the technical, quality, and documentation requirements outlined above. For further information or to submit questions, contact Lydia M. Shaloka at the provided email or phone number.