PLUG,ANODE RETAININ

Key Dates
Due Date

-

Posted Date

-

Agency & Value
Agency

NAVSUP WEAPON SYSTEMS SUPPORT MECH

Contract Value

Not provided

Codes & Classification
Solicitation Number

N0010426QFD97

NAICS

332510 - Hardware Manufacturing

Classification Code

5342

Additional Details
Set Aside

None

Place of Performance

-

SourceSAM
The Department of the Navy, through NAVSUP Weapon Systems Support (NAVSUP WSS) Mechanicsburg, has issued a solicitation (Procurement Identifier: N0010426QFD97) for the supply of a Plug, Anode Retaining component. This procurement is classified under NAICS code 332510 (Hardware Manufacturing) and Product Service Code 5342, and is designated as a total small business set-aside, inviting qualified small business contractors to participate. **Purpose and Scope** The Plug, Anode Retaining item is intended for use in a critical shipboard system, where the integrity and reliability of supplied material are paramount. The solicitation emphasizes that incorrect or defective material could result in catastrophic consequences, including serious personnel injury, loss of life, or loss of vital shipboard systems. As such, the item is designated as SPECIAL EMPHASIS material (Level I, Scope of Certification, or Quality Assured), invoking rigorous control procedures to ensure the receipt of correct and compliant material. **Key Requirements and Objectives** Contractors are required to manufacture the Plug, Anode Retaining in accordance with NAVSEA drawing 5959186 Piece 2 (excluding o-ring and zinc anode), subject to any amplifications or modifications specified in the solicitation. The material must be MIL-C-15726, Alloy C71500 (Temper 060 Rod) or Forged MIL-C-24679 Alloy C71500, with quantitative chemical and mechanical analysis required for certification. Testing certifications are mandatory for ultrasonic and dye penetrant inspections, with performance and acceptance criteria detailed per relevant military standards (T9074-AS-GIB-010/271, MIL-C-24679, MIL-C-15726, MIL-STD-2035). Thread inspection must comply with FED-STD-H28 series, with ASME B1 series as an acceptable commercial equivalent. Internal threads must be formed by cutting, not cold forming. The contractor must maintain configuration control, submit waivers/deviations for any non-conformance, and provide engineering change proposals for modifications affecting form, fit, function, or interface parameters. Mercury and mercury-containing compounds are strictly prohibited. **Quality Assurance and Certification** A robust quality system is required, conforming to ISO-9001, ISO-10012, ANSI-Z540.3, and ISO-17025, or MIL-I-45208 with MIL-STD-45662 calibration requirements. The contractor’s quality system and products are subject to government evaluation, verification, and audit. Suppliers of Level I/SUBSAFE material must submit documented quality system procedures prior to contract award, unless already on file. Traceability and certification are critical: material must be traceable from the finished component back to the material certification test report and other required Objective Quality Evidence (OQE). Certification data must be submitted to Portsmouth Naval Shipyard for review and acceptance prior to each shipment, via Wide Area Work Flow (WAWF). No material may be shipped before acceptance is received. Final inspection requirements include 100% inspection of material verification, traceability, and nondestructive test certifications, as well as sampling inspection per ANSI/ASQ-Z1.4 for lot acceptance. The certificate of compliance must show traceability to the marking applied on each item and include detailed information as specified in the solicitation. **Packaging and Marking** Preservation, packaging, packing, and marking must comply with MIL-STD 2073 and the contract schedule. Material marking for traceability and identification is required, with specific provisions for items with limited marking surface areas. **Contracting Entity and Contact Information** The contracting entity is NAVSUP Weapon Systems Support Mechanicsburg, a federal office under the Department of Defense, Department of the Navy. The primary point of contact is Amanda L. Bailey, reachable at 717-605-3354 or via email at [email protected]. **Procurement Type and Special Considerations** This is a fixed-price solicitation issued under Emergency Acquisition Flexibilities, with a total small business set-aside. Past performance will be considered in the evaluation of offers. Drawings associated with the solicitation are available on SAM.gov with restricted access; interested vendors must request access and notify the POC. The proposed delivery schedule requires submission of certification data 20 days prior to scheduled delivery, review/acceptance within 45 working days, and final delivery within 365 days. Early and incremental delivery is acceptable at no additional cost. **Constant Elements Throughout Contract Lifecycle** - Rigorous quality assurance and traceability requirements - Compliance with specified material, testing, and certification standards - Configuration control and government oversight - Mandatory submission and acceptance of certification data prior to shipment - Adherence to packaging and marking standards - Mercury-free material requirement - Total small business set-aside and fixed-price procurement **Summary for Contractors** Contractors considering this opportunity should ensure they have the capability to meet stringent quality, traceability, and certification requirements, maintain robust quality systems, and comply with all specified material and testing standards. The procurement is highly controlled due to the critical nature of the end-use application, and only suppliers with proven experience in manufacturing and certifying Level I/SUBSAFE hardware for naval applications should consider responding. For further details and access to restricted drawings, contractors should refer to the solicitation on SAM.gov (Opportunity ID: 251d62c8cb5d4935940ab8640ccd082a) and contact Amanda L. Bailey as indicated above. The response deadline is June 15, 2026.