STEM DISC ASSEMBLY
Key Dates
Due Date
-
Posted Date
-
Agency & Value
Agency
NAVSUP WEAPON SYSTEMS SUPPORT MECH
Contract Value
Not provided
Codes & Classification
Solicitation Number
N0010426QNC52
NAICS
332919 - Other Metal Valve and Pipe Fitting Manufacturing
Classification Code
4820
Additional Details
The Department of the Navy, through the Naval Supply Systems Command (NAVSUP) Weapon Systems Support office in Mechanicsburg, PA, has issued a solicitation for the procurement of a STEM DISC ASSEMBLY. This requirement is classified under NAICS code 332919 (Other Metal Valve and Pipe Fitting Manufacturing) and Product Service Code 4820, indicating its relevance to contractors specializing in the manufacture of metal valves and related assemblies for shipboard applications.
**Purpose and Scope**
The procurement seeks the complete manufacture and delivery of a stem and disk assembly for a 1/4 inch globe valve, intended for use in a critical shipboard system. The assembly must be produced in strict accordance with NAVSEA drawing 803-6397434, part number 803-6397434-X11XX1-95, encompassing specific items (12, 19, 38, 40, and 47) as detailed in the solicitation. The material and workmanship are subject to heightened scrutiny due to the assembly’s designation as SPECIAL EMPHASIS material (Level I, Scope of Certification, or Quality Assured). The failure of this component could result in catastrophic consequences, including serious personnel injury, loss of life, or loss of vital shipboard systems.
**Key Requirements and Deliverables**
- **Material and Certification:** The stem (Item 12) and disc (Item 47) must be manufactured from MIL-DTL-24252 material, with the stem in Composition 1, Condition A, and the disc in Composition I, Condition CA-7. No weld repairs are permitted on MIL-DTL-24252 material. Quantitative chemical and mechanical analysis is required, and all certifications must be traceable to the material’s unique identification.
- **Testing:** Ultrasonic inspection is mandatory for both the stem and disc, with performance and acceptance criteria per MIL-STD-2132 and MIL-DTL-24252. Certifications for these tests must be provided.
- **Quality Assurance:** Contractors must maintain a quality system compliant with ISO-9001 (or MIL-I-45208 as an alternate), with calibration systems per ISO-10012 or ANSI-Z540.3/ISO-17025. The quality system and all products are subject to government evaluation, verification, and acceptance.
- **Traceability:** Full traceability from raw material to finished product is required, including permanent marking of materials and maintenance of records linking each assembly to its certification data.
- **Inspection and Acceptance:** Government Quality Assurance at source is required. Certification data must be submitted to Portsmouth Naval Shipyard for review and acceptance prior to shipment. No material may be shipped before formal acceptance is received.
- **Packaging:** Preservation, packaging, and marking must comply with MIL-STD-2073 and any additional contract requirements.
- **Documentation:** Contractors must submit certificates of compliance, test certifications, and maintain detailed inspection records. Electronic signatures are permitted under controlled procedures.
**Contracting Entity and Contact Information**
- **Contracting Office:** NAVSUP Weapon Systems Support (WSS) Mechanicsburg, PA
- **Department:** Department of Defense, Department of the Navy
- **Primary Contact:** Brittany A. Langletz, [email protected]
**Procurement Type and Special Considerations**
This solicitation is a total small business set-aside, in accordance with applicable federal regulations. The procurement is being conducted under Emergency Acquisition Flexibilities (EAF), and the resultant contract will be a DO-rated order under the Defense Priorities and Allocations System (DPAS), reflecting its criticality to national defense and emergency preparedness. The award will be bilateral, requiring the vendor’s written acceptance prior to execution.
**Additional Considerations**
- **Security and Data Access:** Access to drawings and technical data may require request and approval via the SAM.gov solicitation page and communication with the primary point of contact.
- **Subcontracting:** Prime contractors are responsible for ensuring that all sub-tier suppliers comply with the same quality and traceability requirements.
- **No Mercury:** Mercury and mercury-containing compounds are strictly prohibited in the manufacturing process.
- **Configuration Control:** Any waivers, deviations, or engineering changes must be submitted for government approval, with detailed justification and impact analysis.
**Constant Elements Over Contract Lifecycle**
Throughout the contract, the requirements for material traceability, quality assurance, configuration control, and compliance with all referenced specifications and standards will remain unchanged. The critical safety nature of the assembly ensures that these controls and documentation requirements will persist for the duration of the contract and any subsequent modifications.
**Summary for Contractors**
This opportunity is suited for small businesses with demonstrated expertise in precision metal valve and pipe fitting manufacturing, robust quality assurance systems, and experience with high-assurance, traceable production for defense applications. Contractors must be prepared to meet stringent material, testing, and documentation requirements, and to coordinate closely with government quality assurance representatives throughout the production and delivery process.
Interested parties should review the full solicitation and associated technical data, and direct any questions or requests for access to controlled documents to the primary contact listed above. The response deadline is June 22, 2026.
For further details and to access the solicitation, visit: [SAM.gov Opportunity](https://sam.gov/opp/4233f98d4be04a0b89e28534f404a3bb/view).