NUT,SELF-LOCKING,HE
Key Dates
Due Date
-
Posted Date
-
Agency & Value
Agency
NAVSUP WEAPON SYSTEMS SUPPORT MECH
Contract Value
Not provided
Codes & Classification
Solicitation Number
N0010426QFD81
NAICS
332722 - Bolt, Nut, Screw, Rivet, and Washer Manufacturing
Classification Code
5310
Additional Details
The Department of the Navy, through the Naval Supply Systems Command (NAVSUP) Weapon Systems Support office in Mechanicsburg, PA, has issued a solicitation (Procurement Identifier: N0010426QFD81) for the supply of a critical shipboard component: the Nut, Self-Locking, Heavy Hex (HE), under NAICS code 332722 (Bolt, Nut, Screw, Rivet, and Washer Manufacturing). This procurement is classified under Product Service Code 5310 and is a Total Small Business Set-Aside, inviting offers exclusively from qualified small business concerns.
**Purpose and Scope**
The primary objective of this procurement is to acquire self-locking, heavy hex nuts (ring type, non-metallic insert, controlled root radius, nickel-copper alloy, Part Number M32258-UAC22) for use in crucial shipboard systems. These components are designated as SPECIAL EMPHASIS material (Level I, Scope of Certification, or Quality Assured) due to their criticality; failure or nonconformance could result in serious personnel injury, loss of life, or catastrophic failure of vital shipboard systems. As such, the procurement invokes stringent quality assurance, traceability, and certification requirements to ensure the highest level of reliability and safety.
**Key Requirements and Deliverables**
Contractors are required to manufacture and deliver nuts conforming to MIL-DTL-32258, with material in accordance with QQ-N-281, Class A or B, and self-locking elements per ASTM-D6456 or ASTM-D4066. All material must be of the same class, and internal threads must be formed by cutting (cold forming is not acceptable). The unit of issue is EACH, and for each uniquely identified heat/lot, one additional fastener must be provided for traceability.
The contract mandates comprehensive certification and traceability, including:
- Quantitative chemical and mechanical analysis of materials.
- Certifications for dye penetrant inspection (for non-magnetic grades) and quality conformance tests.
- First Article Testing (FAT) per NASM25027 and MIL-N-25027/1, with provisions for waivers if prior qualification can be demonstrated.
- Complete traceability from raw material to finished product, with permanent marking per MIL-STD-792 and MIL-DTL-32258.
- Submission of a Certificate of Compliance (C of C) for each shipment, showing traceability to the marking on each item and attesting to full compliance with all specifications and tests.
All certification data must be submitted to Portsmouth Naval Shipyard (DODAAC N50286) for review and acceptance prior to shipment, using the Wide Area Workflow (WAWF) system. No material may be shipped before acceptance is received.
**Quality Assurance and Inspection**
The contractor must maintain a quality system compliant with ISO-9001 (or MIL-I-45208 as an alternate), with calibration systems per ISO-10012 or ANSI-Z540.3/ISO-17025. The quality system and all products are subject to government evaluation, verification, and source inspection by the Defense Contract Management Agency (DCMA) or other authorized representatives. Suppliers of Level I/SUBSAFE material must submit their quality system procedures for approval prior to award, unless already on file.
Inspection requirements include:
- 100% inspection of traceability marking, certification data, and NDT certifications.
- Lot acceptance based on zero defects, with sampling plans per applicable military or federal standards, or ANSI/ASQ-Z1.4 if not specified.
- Government Quality Assurance at source, with notification to DCMA upon award.
**Configuration Control and Change Management**
Contractors are responsible for maintaining the total equipment baseline configuration and must submit Engineering Change Proposals (ECPs) for any modifications affecting form, fit, function, or interface. All waivers and deviations require prior approval from the Contracting Officer and must be classified as Critical, Major, or Minor.
**Packaging and Marking**
Preservation, packaging, packing, and marking must comply with MIL-STD-2073 and contract-specific requirements. Fasteners must be marked with material symbols, manufacturer identification, and traceability markings as specified.
**Special Considerations**
- This procurement is a "DX" rated order under the Defense Priorities and Allocations System (DPAS), indicating its priority for national defense.
- The order is issued under Emergency Acquisition Flexibilities (EAF).
- Level I Joint Source Certification is required.
- Mercury and mercury-containing compounds are strictly prohibited.
- The contract is subject to Buy American and Free Trade Agreements provisions.
- Past performance will be considered in the evaluation of offers.
**Contracting Entity and Contact Information**
- Contracting Entity: NAVSUP Weapon Systems Support Mechanicsburg (NAVSUP WSS MECH)
- Department: Department of Defense, Department of the Navy
- Primary Contact: Lydia M. Shaloka, Telephone: 215-697-4717, Email: [email protected]
- Submission and Certification Data: To be sent via WAWF, with notification to [email protected]
**Response and Timeline**
- Notice Post Date: June 18, 2026
- Response Due Date: July 17, 2026
- Notice Status: Active
- Solicitation and further details available at: [SAM.gov Opportunity](https://sam.gov/opp/fa53c8d53e644d67b563febc0c1743d3/view)
**Summary for Contractors**
This opportunity is suited for small businesses with demonstrated expertise in manufacturing high-reliability, traceable fasteners for defense applications, and with robust quality assurance systems. The contract’s requirements for material traceability, certification, and configuration control are stringent and non-negotiable, reflecting the critical safety implications of the end-use application. Contractors must be prepared to support comprehensive documentation, government audits, and source inspections throughout the contract lifecycle. The "DX" rating and emergency acquisition flexibilities underscore the urgency and importance of timely, compliant delivery.
Interested parties should carefully review all referenced specifications and ensure their capability to meet all technical, quality, and administrative requirements before submitting an offer.