Engine Repair

Key Dates
Due Date

-

Posted Date

-

Agency & Value
Agency

SFLC PROCUREMENT BRANCH 3(00040)

Contract Value

Not provided

Codes & Classification
Solicitation Number

52000PR260024754

NAICS

336611 - Ship Building and Repairing

Classification Code

J020

Additional Details
Set Aside

SBA

Place of Performance

Ilwaco, Washington, UNITED STATES

SourceSAM
Documents2
The U.S. Coast Guard, Surface Forces Logistics Center (SFLC) Procurement Branch 3, is soliciting quotes from qualified small businesses for specialized engine repair services under solicitation number 52000PR260024754. This procurement is issued as a combined synopsis/solicitation for commercial services in accordance with FAR Subpart 12.6, and is a total small business set-aside. The anticipated result is a firm fixed price purchase order awarded competitively based on technical capability, past performance, and price. **Purpose and Scope** The primary objective of this procurement is to restore the operational readiness of two National Motor Lifeboat School (NMLBS) assets—47 MLB-C vessels with hull numbers 47283 and 47284—stationed in Ilwaco, Washington. Both vessels have experienced failures in their port main diesel engines (Cummins QSC 8.3, S/N: 74952593 and 74952601, respectively), specifically a loss of compression in the #1 cylinder. The intended outcome is to return these critical assets to full mission capability through targeted top-end and cylinder rebuilds, as well as comprehensive inspections of all remaining cylinders. **Key Requirements and Deliverables** The contractor will be responsible for providing all qualified personnel, labor, materials, and tools necessary to perform the following on both engines: - Disassembly of the QSC 8.3 engine to access and replace the #1 cylinder assembly. - Inspection of cylinders #2 through #6 and all other internal components during disassembly. - All work must be performed by certified Cummins technicians, with proof of certification available upon request. - Strict use of new, Original Equipment Manufacturer (OEM) Cummins parts and fluids; aftermarket or used parts are prohibited except for factory-remanufactured OEM cylinder heads. - Compliance with the latest Cummins service manuals, USCG technical standards, and all applicable environmental and safety regulations. - Coordination with the USCG point of contact to commence work at the NMLBS facility in Ilwaco, WA, or at the contractor’s designated facility. Specific tasks include draining fluids, removing and reinstalling engine components, replacing the failed cylinder kit, performing valve adjustments, and reassembling the engine to factory specifications. The contractor must also replace all minor gaskets, seals, and fluids disturbed during the repair. **Testing and Acceptance** To verify successful repairs, the contractor must complete one of the following performance testing options: - **Option A:** Conduct a full dynamometer test at the contractor’s facility, providing official dyno run data sheets to the USCG. No further dockside or underway testing is required if this option is selected. - **Option B:** Participate in dockside operational leak checks and an underway sea trial at the vessel location after USCG personnel reinstall the engines. Final acceptance is contingent upon satisfactory performance testing and delivery of all required documentation. **Deliverables include:** - An itemized invoice detailing all authorized charges. - A comprehensive service/inspection report covering work performed, measured clearances, inspection findings, and final engine parameters. - Dynamometer report (if applicable). - Written warranty documentation for all parts and labor. **Government Responsibilities** USCG personnel will handle engine removal, reinstallation, and staging. The government will provide temporary blocking for the engines at the repair site. **Special Considerations** - If damage beyond the prescribed scope is discovered (e.g., catastrophic lower-end damage or excessive wear in other cylinders), the contractor must halt work and submit a Condition Found Report (CFR) detailing the findings, recommended corrective actions, and an itemized quote for additional work. No extra work may proceed without written government authorization. - The contractor is responsible for compliance with all federal, state, and local environmental, health, and safety regulations, including OSHA and EPA requirements. Proper handling and disposal of hazardous materials and adherence to site-specific safety rules are mandatory. - All invoicing must be processed through the Invoice Processing Platform (https://www.ipp.gov). **Contracting Entity and Contact Information** - **Contracting Entity:** SFLC PROCUREMENT BRANCH 3(00040), U.S. Coast Guard, Department of Homeland Security - **Location of Work:** National Motor Lifeboat School, 433 Coast Guard Rd, Ilwaco, WA 98624, or contractor’s facility - **NAICS Code:** 336611 (Ship Building and Repairing) - **PSC:** J020 - **Set-Aside:** Total Small Business - **Primary Contact:** Joshua Richardson, Contracting Officer ([email protected]) - **Technical Contact:** Mitchell Sabo ([email protected]) - **Unit POC:** MKCS Matthew Neff ([email protected], 609-576-1834) **Submission Details** Quotes must be submitted via email to the contracting officer, referencing the solicitation number in the subject line. The period of performance is within 30 days of contract award. **Applicable Regulations** This procurement is governed by Federal Acquisition Regulations (FAR) clauses relevant to commercial services, labor standards, and protection of government property, among others. **Summary** This opportunity is well-suited for small businesses with certified Cummins technicians, experience in marine diesel engine repair, and the capacity to comply with stringent OEM, safety, and environmental requirements. The scope is clearly defined, with government support for engine removal and reinstallation, and a transparent process for addressing unforeseen conditions. Contractors must be prepared to deliver high-quality, OEM-compliant repairs and thorough documentation to support the USCG’s mission-critical operations.