NUT,PLAIN,BARREL

Key Dates
Due Date

-

Posted Date

-

Agency & Value
Agency

NAVSUP WEAPON SYSTEMS SUPPORT MECH

Contract Value

Not provided

Codes & Classification
Solicitation Number

N0010426QFD76

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer Manufacturing

Classification Code

5310

Additional Details
Set Aside

None

Place of Performance

-

SourceSAM
Documents1
The Department of the Navy, through NAVSUP Weapon Systems Support (NAVSUP WSS) Mechanicsburg, has issued a solicitation (Procurement Identifier: N0010426QFD76) for the manufacture and supply of a specialized component: the Barrel Nut, classified under Product Service Code 5310 (Nuts and Washers) and NAICS Code 332722 (Bolt, Nut, Screw, Rivet, and Washer Manufacturing). This procurement is a Total Small Business Set-Aside, inviting qualified small business manufacturers to participate. **Purpose and Scope** The Barrel Nut is a critical component intended for use in a vital shipboard system. Its correct manufacture and certification are essential, as any defect or nonconformance could result in catastrophic failure, serious injury, loss of life, or loss of shipboard systems. Accordingly, this item is designated as SPECIAL EMPHASIS material (Level I, Scope of Certification, or Quality Assured), invoking rigorous control procedures to ensure the delivery of compliant and reliable material. **Key Requirements and Objectives** - **Manufacturing Standards:** The Barrel Nut must be produced in strict accordance with Naval Sea Systems Command drawings 803-5959302 (item 17) and 803-5959311, with modifications as specified in the solicitation. No weld repairs are permitted on QQ-N-286 material. - **Material and Testing:** The nut must be made from QQ-N-286, form 2, annealed and age hardened, with mechanical properties as modified per drawing note S4B. Quantitative chemical and mechanical analysis is required, and certifications must be provided for annealing, age hardening, and ultrasonic inspection (for starting material with diameter or minimum distance between parallel surfaces of 4 inches or greater). - **Testing Laboratories:** Slow Strain Rate Tensile Tests must be performed by one of several specified laboratories, including Huntington Alloys, Metallurgical Consultants, Naval Surface Warfare Center Carderock Division, Teledyne Allvac, Westmoreland Mechanical Testing, Mannesmann Rohrenwerke, and ThyssenKrupp VDM USA. - **Thread Requirements:** All internal threads must be cut (not cold-formed), and thread inspection must follow FED-STD-H28 series or ASME B1 series as a commercial equivalent. System 21 of FED-STD-H28/20 is the minimum inspection requirement unless otherwise specified. - **Traceability and Certification:** The contractor must maintain traceability from material to certification test reports and Objective Quality Evidence (OQE). Markings must be permanently applied per MIL-STD-792, or on durable tags for items with limited marking surface. - **Quality Assurance:** Contractors must maintain a quality system compliant with ISO-9001, ISO-10012 or ANSI-Z540.3 with ISO-17025, or MIL-I-45208 with MIL-STD-45662 calibration requirements. The system is subject to government evaluation and audit. - **Inspection and Acceptance:** Government Quality Assurance will be performed at the source. No material may be shipped prior to receipt of acceptance. Final delivery of material is required within 365 days of contract effective date. - **Certification Data:** Certification documentation must be submitted to Portsmouth Naval Shipyard (DODAAC N50286) for review and acceptance prior to each shipment, via Wide Area Work Flow (WAWF). No material is to be shipped before acceptance. - **Configuration Control:** The contractor must maintain equipment baseline configuration and submit Engineering Change Proposals (ECPs) for any modifications affecting form, fit, function, or interface parameters. - **Mercury-Free Requirement:** Mercury and mercury-containing compounds must not be intentionally added or come into contact with supplied hardware. - **Packaging:** Preservation, packaging, packing, and marking must comply with MIL-STD 2073 and contract schedule requirements. **Contracting Entity and Contact Information** - **Contracting Office:** NAVSUP Weapon Systems Support Mechanicsburg (NAVSUP WSS MECH), a federal office under the Department of Defense, Department of the Navy. - **Primary Contact:** Alana M. Boyer, Telephone: 717-605-1234, Email: [email protected] - **Notice URL:** [SAM.gov Opportunity](https://sam.gov/opp/6228270f1a9c4acfa9583170156c38e0/view) - **Response Deadline:** June 5, 2026 **Procurement Type and Special Considerations** - **Solicitation Type:** Fixed-price contract, DO-rated order under the Defense Priorities and Allocations System (DPAS), certified for national defense use. - **Set-Aside:** Total Small Business Set-Aside. - **Security Requirements:** Access to NOFORN and/or Naval Nuclear Propulsion Information is required. Contractors must download and submit a security agreement form from SAM.gov to obtain drawings. - **Emergency Acquisition Flexibilities:** This order is issued pursuant to Emergency Acquisition Flexibilities (EAF). - **Data Submission:** Electronic Contractor Data Submission (ECDS) system is used for certain data submissions, questions, clarifications, and waiver requests. **Constant Elements Throughout Contract Lifecycle** - The Barrel Nut will remain a critical safety item, subject to stringent quality, traceability, and certification requirements. - The contract will require ongoing compliance with government quality assurance, configuration control, and traceability standards. - All documentation, inspection, and certification processes will be governed by the requirements outlined in the solicitation and referenced standards. - The contractor must maintain a robust quality system and be prepared for government audits and inspections at any time. - Security and data handling requirements will persist, including restrictions on distribution and access to technical information. **Summary for Contractors** This opportunity is suited for small business manufacturers with proven capabilities in precision machining, quality assurance, and traceability for critical shipboard components. Contractors must demonstrate compliance with rigorous material, testing, and certification standards, maintain a government-auditable quality system, and be able to manage secure data and documentation processes. The contract’s requirements for traceability, configuration control, and government source inspection are central to its execution. Interested parties should review the solicitation in detail, ensure they can meet all technical and administrative requirements, and contact the primary contracting officer for further information or access to controlled documents. For further details and to access solicitation documents, visit the SAM.gov opportunity page or contact Alana M. Boyer at the provided email and phone number.