American Society of Mechanical Engineers Code Tube pressure vessels
Key Dates
Due Date
-
Posted Date
-
Agency & Value
Agency
NASA MARSHALL SPACE FLIGHT CENTER
Contract Value
Not provided
Codes & Classification
Solicitation Number
80MSFC26Q0004
NAICS
332420 - Metal Tank (Heavy Gauge) Manufacturing
Classification Code
E1PB
Additional Details
NASA’s Marshall Space Flight Center (MSFC) in Huntsville, Alabama, has issued a Special Notice regarding its intent to procure American Society of Mechanical Engineers (ASME) Code Tube pressure vessels. This procurement seeks to acquire a total of twelve (12) tube pressure vessels, each with an individual maximum water volume of approximately 60 cubic feet. The vessels are to be delivered in three sets, with each set comprising a stacked configuration of four vessels (commonly referred to as a “4-pack”), resulting in a combined total water volume of approximately 233 cubic feet per set.
The primary objective of this procurement is to obtain pressure vessels that are fully compliant with ASME code requirements and that precisely match the vessels previously installed at MSFC in 2017. The foundations and infrastructure at the facility were constructed based on the specifications and drawings of the original vessels, which were supplied by FIBA Technologies, Inc. To ensure compatibility and maintain operational consistency, the additional vessels must be identical to those previously acquired. This requirement is critical for seamless integration with existing systems and to uphold safety and performance standards.
NASA/MSFC intends to award this contract on a sole source basis to FIBA Technologies, Inc., the original manufacturer of the installed vessels. This decision is made in accordance with FAR subpart 13.5(a)(1)(ii) and 41 U.S.C. 1901, allowing for streamlined acquisition of commercial items under FAR Part 12. The rationale for the sole source approach is the necessity for exact matching of the new vessels to the existing units, which precludes the use of alternative suppliers.
The scope of work includes the manufacture and delivery of the specified ASME Code Tube pressure vessels to the MSFC site in Huntsville, Alabama. Upon arrival, unloading will be managed by onsite NASA personnel. No installation or additional services are required from the contractor beyond delivery.
This procurement falls under NAICS Code 332420 (Metal Tank [Heavy Gauge] Manufacturing), as defined in the 2022 NAICS manual, and is classified under Product Service Code E1PB. The opportunity is currently active, and interested organizations are invited to submit their capabilities and qualifications to the Contracting Officer, Stephanie Darnell, via email at [email protected], no later than 3:00 p.m. CST on May 8, 2026. The notice does not specify any set-aside requirements or special considerations beyond the sole source justification.
Contractors evaluating this opportunity should note that the key deliverable is the provision of ASME-certified tube pressure vessels that are identical in design and specification to those previously supplied by FIBA Technologies, Inc. The vessels must be suitable for integration with existing infrastructure at MSFC, and no deviations from the established design will be accepted. The procurement is managed by the NASA Marshall Space Flight Center, a federal office under the National Aeronautics and Space Administration.
For further information or to express interest, potential offerors should contact Stephanie Darnell at [email protected] or by phone at 256-544-7923. Additional details can be found on the official SAM.gov opportunity listing at https://sam.gov/opp/92361c67fbec4a62a67a423345679936/view.