SCREW,CAP,HEXAGON H

Key Dates
Due Date

-

Posted Date

-

Agency & Value
Agency

NAVSUP WEAPON SYSTEMS SUPPORT MECH

Contract Value

Not provided

Codes & Classification
Solicitation Number

N0010426QFB12

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer Manufacturing

Classification Code

5305

Additional Details
Set Aside

None

Place of Performance

-

SourceSAM
Documents1
The Department of the Navy, through NAVSUP Weapon Systems Support Mechanicsburg (NAVSUP WSS MECH), has issued a solicitation (Procurement Identifier: N0010426QFB12) for the manufacture and supply of a specialized Screw, Cap, Hexagon Head. This procurement is classified under NAICS code 332722 (Bolt, Nut, Screw, Rivet, and Washer Manufacturing) and Product Service Code 5305, indicating its focus on high-integrity fastener components. The solicitation is active and open for responses until April 24, 2026. **Purpose and Scope** The primary objective of this procurement is to acquire screws that are integral to crucial shipboard systems. The criticality of these components is underscored by their designation as SPECIAL EMPHASIS material (Level I, Scope of Certification, or Quality Assured). The failure or malfunction of these screws could result in severe consequences, including personnel injury, loss of life, or catastrophic failure of shipboard systems. As such, the procurement invokes stringent quality assurance, traceability, and certification requirements to ensure the highest standards of safety and reliability. **Key Requirements and Deliverables** - **Technical Specifications:** The screws must conform to Oil States drawing 302893, part number 302893-110, with specific modifications as detailed in the solicitation. The self-locking element must comply with MIL-DTL-18240. - **Material and Testing:** The primary material is QQ-N-286, Form 2, annealed and age hardened. Quantitative chemical and mechanical analysis is mandatory, with certifications required for liquid penetrant inspection, ultrasonic inspection (for items with a diameter or minimum distance between parallel surfaces of 4 inches or greater), and other tests as specified. - **Traceability:** Complete traceability from raw material to finished product is required. Each shipment must include one additional fastener per uniquely identified heat/lot for traceability purposes. - **Quality Assurance:** Contractors must maintain a quality system in accordance with ISO-9001 (or MIL-I-45208 as an alternate), with calibration systems per ISO-10012 or ANSI-Z540.3 with ISO-17025. The quality system and all products are subject to government evaluation, verification, and inspection. - **Certification and Documentation:** Certificates of compliance, test certifications, and material certification reports must be provided, demonstrating full compliance with all contractually invoked specifications and requirements. Certification data must be submitted to Portsmouth Naval Shipyard for review and acceptance prior to each shipment, using the Wide Area Work Flow (WAWF) system. - **Marking and Identification:** All fasteners must be permanently marked for traceability in accordance with MIL-DTL-1222 and MIL-STD-792, including material symbol, manufacturer’s identification, and traceability marking. - **Packaging:** Preservation, packaging, packing, and marking must comply with MIL-STD 2073 and any additional requirements specified in the contract. - **Warranty:** A one-year warranty from the date of delivery is required for all supplied items. **Contract Administration and Special Considerations** - **Contract Type:** The solicitation is for a fixed-price supply contract. - **Defense Priorities:** Any contract awarded will be a DO-rated order under the Defense Priorities and Allocations System (DPAS), certified for national defense use. - **Inspection and Acceptance:** Government source inspection is required at the contractor’s facility, and no material may be shipped prior to formal acceptance. - **Configuration Control:** The contractor must maintain configuration control and submit Engineering Change Proposals (ECPs) for any modifications affecting form, fit, function, or interface parameters. - **Subcontractor Management:** The prime contractor is responsible for ensuring all sub-tier suppliers meet the same quality and traceability requirements, including periodic audits and reviews. - **Mercury-Free Requirement:** No mercury or mercury-containing compounds may be used or come into contact with the supplied hardware. - **Data Submission:** All required data and certifications must be submitted electronically via WAWF, with specific instructions for notification and document routing. **Contracting Entity and Contact Information** - **Contracting Office:** NAVSUP Weapon Systems Support Mechanicsburg (NAVSUP WSS MECH) - **Department/Agency:** Department of Defense, Department of the Navy - **Primary Contact:** Ashton K. Perry, Telephone: 717-605-7574, Email: [email protected] - **Notice URL:** [SAM.gov Opportunity](https://sam.gov/opp/0f3caf91279840a397bd33529160b142/view) **Constant Elements Over Contract Lifecycle** Throughout the contract lifecycle, the following elements will remain constant: - The critical safety and quality assurance requirements for Level I/SUBSAFE material. - The need for full traceability, certification, and compliance with all specified standards and drawings. - The requirement for government source inspection and acceptance prior to shipment. - The use of WAWF for all certification and data submissions. - The prohibition of mercury and the necessity for permanent, legible marking for traceability. **Summary for Contractors** This opportunity is best suited for manufacturers with demonstrated experience in producing high-integrity, traceable fasteners for critical defense applications, and who possess robust quality management systems certified to ISO-9001 or equivalent. The contract’s stringent requirements for material traceability, testing, certification, and government oversight reflect the mission-critical nature of the end use. Contractors must be prepared to manage complex documentation, maintain configuration control, and ensure compliance at all levels of the supply chain. The contract is not set aside for small business, but the NAICS code indicates a size standard of 600 employees. Interested parties should carefully review the full solicitation and ensure their capabilities align with the technical, quality, and administrative requirements before responding. For further information or to submit questions, contact Ashton K. Perry at [email protected] or 717-605-7574.