BOLT,SHOULDER
Key Dates
Due Date
-
Posted Date
-
Agency & Value
Agency
NAVSUP WEAPON SYSTEMS SUPPORT MECH
Contract Value
Not provided
Codes & Classification
Solicitation Number
N0010426QFD38
NAICS
332722 - Bolt, Nut, Screw, Rivet, and Washer Manufacturing
Classification Code
5306
Additional Details
Documents3
The Department of the Navy, through the Naval Supply Systems Command (NAVSUP) Weapon Systems Support office in Mechanicsburg, PA, has issued a solicitation (Procurement Identifier: N0010426QFD38) for the supply of a specialized "BOLT, SHOULDER" component. This procurement is classified under NAICS code 332722 (Bolt, Nut, Screw, Rivet, and Washer Manufacturing) and Product Service Code 5306, indicating its focus on the manufacturing and supply of high-integrity fasteners for critical applications.
**Purpose and Scope**
The primary objective of this solicitation is to procure bolts for use in crucial shipboard systems. These bolts are designated as "SPECIAL EMPHASIS" material (Level I, Scope of Certification, or Quality Assured), reflecting their criticality to ship safety and operational integrity. The failure or nonconformance of these components could result in severe consequences, including personnel injury, loss of life, or catastrophic failure of shipboard systems. As such, the procurement invokes stringent quality assurance, traceability, and certification requirements to ensure only fully compliant material is delivered and installed.
**Key Requirements and Deliverables**
Contractors are required to manufacture and deliver bolt studs in accordance with Delaval drawing CW-183BL, Item 1, as further specified in the solicitation. The bolts must be produced from QQ-N-286 material (hot finished and age hardened or cold drawn annealed and age hardened), with a minimum yield strength of 90,000 PSI and full conformance to MIL-DTL-1222. The unit of issue is EACH, and for each uniquely identified heat/lot of material, one additional fastener must be provided for traceability and testing purposes.
The solicitation mandates comprehensive material and process certifications, including:
- Quantitative chemical and mechanical analysis of the supplied material.
- Liquid penetrant inspection and ultrasonic inspection (for starting material ≥4 inches in diameter or as otherwise required).
- Heat treatment and mechanical property verification for K-MONEL fasteners.
- Slow strain rate tensile testing, to be performed by one of several specified, pre-approved laboratories.
- Full traceability from raw material to finished product, with permanent marking per MIL-STD-792 and MIL-DTL-1222.
- Submission of a Certificate of Compliance (C of C) for each shipment, detailing traceability, test results, and conformance to all requirements.
All certification data must be submitted to Portsmouth Naval Shipyard (DODAAC N50286) for review and acceptance prior to shipment, using the Wide Area Work Flow (WAWF) system. No material may be shipped before formal acceptance is received.
**Quality Assurance and Inspection**
The contract invokes a higher-level contract quality requirement, with the contractor required to maintain a quality system compliant with ISO 9001 (or MIL-I-45208 as an alternate), and calibration systems per ISO 10012, ANSI-Z540.3, and ISO/IEC 17025. Government Quality Assurance (GQA) at source is required, and the contractor’s quality system and facilities are subject to audit and inspection by government representatives (typically DCMA QARs).
All inspection and test records must be maintained and traceable to the material inspected. Subcontractor controls, receiving inspection, and discrepancy reporting are also strictly regulated to ensure end-to-end compliance and traceability.
**Contract Administration and Special Considerations**
- The contract will be a fixed-price supply contract.
- The order is "DO" rated under the Defense Priorities and Allocations System (DPAS), indicating priority for national defense.
- Emergency Acquisition Flexibilities (EAF) apply.
- The contract is subject to the Buy American Act, Free Trade Agreements, and Balance of Payments Program requirements.
- The warranty period for supplied items is one year from the date of delivery.
- The contract includes provisions for configuration control, engineering change proposals, and the mandatory use of the Navy’s electronic data submission systems.
- Mercury and mercury-containing compounds are strictly prohibited in the supplied material.
- All packaging, preservation, and marking must comply with MIL-STD-2073 and other contract-specific requirements.
**Contracting Entity and Contact Information**
- Contracting Entity: NAVSUP Weapon Systems Support, Mechanicsburg, PA (Federal Office)
- Department: Department of Defense, Department of the Navy
- Primary Contact: Alana M. Boyer, Email: [email protected], Telephone: 717-605-1234
**Response and Submission Details**
- Notice posted: 04/05/2026
- Response deadline: 04/05/2026, 20:05
- Notice status: Active
- Opportunity details and attachments are available at: [SAM.gov Opportunity Link](https://sam.gov/opp/2dd25ca2b2804408823963a6deb0131f/view)
**Summary for Contractors**
This solicitation represents a highly specialized and tightly controlled procurement for critical shipboard fasteners. Contractors must demonstrate robust quality management systems, proven experience with Level I/SUBSAFE or similar high-assurance material, and the ability to comply with extensive certification, traceability, and government inspection requirements. The opportunity is best suited for manufacturers with established capabilities in defense-grade fastener production, familiarity with Navy technical data and standards, and the infrastructure to support rigorous documentation and electronic data submission protocols. Contractors should carefully review all technical and quality requirements to ensure alignment with their capabilities before responding.