6640--Brand Name or Equal Triple Quad Liquid Chromatography (LC) / Mass Spectrometry (MS) Systems
Key Dates
Due Date
-
Posted Date
-
Agency & Value
Agency
257-NETWORK CONTRACT OFFICE 17 (36C257)
Contract Value
Not provided
Codes & Classification
Solicitation Number
36C25726Q0477
NAICS
334516 - Analytical Laboratory Instrument Manufacturing
Classification Code
6640
Additional Details
Documents4
The Department of Veterans Affairs, through its Network Contracting Office 17 (NCO 17), is conducting market research to identify qualified sources capable of providing two (2) Liquid Chromatography/Mass Spectrometry (LC/MS) systems for the VA North Texas Veterans Healthcare System (VANTXHCS) in Dallas, TX. This procurement is structured as a lease-to-own arrangement, whereby the Government will retain title to the equipment at the conclusion of the contract period. The requirement is for systems that are brand name or equal to the Agilent 6475 Triple Quad LC/MS System, including all necessary hardware, consumables, installation, training, and maintenance services.
The primary objective of this procurement is to equip the VANTXHCS laboratory with advanced analytical instrumentation to support a wide range of clinical and research applications. The intended outcome is to enhance the facility’s analytical capabilities, ensuring high sensitivity, accuracy, and throughput in mass spectrometric analyses. The contract will be awarded as a Firm-Fixed Price (FFP) agreement.
Key requirements and deliverables for this opportunity include:
- **Equipment Specifications**: The LC/MS systems must be triple quadrupole mass spectrometers with a mass range of at least m/z 5–3000, scan speeds up to 18,000 Da/sec, and multiple mass resolution options (0.4, 0.7, 1.2, and 2.5 Da FWHM). The systems must maintain mass accuracy within ±0.1 Da and mass stability with drift less than 0.1 Da over 24 hours. Sensitivity must reach low-femtogram detection limits (<5 fg) in both positive and negative ionization modes, with signal-to-noise ratios exceeding 850,000:1 and a linear dynamic range of at least six orders of magnitude.
- **Ionization and Throughput**: The instruments must support Electrospray Ionization (ESI), Atmospheric Pressure Chemical Ionization (APCI), and multimode ionization, including compatibility with low-flow nano spray ionization. They must be capable of 500 MRM transitions per second, with minimum dwell times of 0.5 ms, and support for Dynamic MRM (dMRM) and Triggered MRM (tMRM), handling over 30,000 transitions per method.
- **Operational Features**: Fast polarity switching (<25 ms), collision cell clearance time (<1 ms), predictive maintenance tools, automated tuning, and features such as iReflex for automated reinjections or extended runs are required. The system must allow for front-end cleaning without breaking vacuum (e.g., VacShield or equivalent), with routine cleaning downtime not exceeding 30–45 minutes.
- **Software and Compliance**: The data system must support comprehensive acquisition and quantitation modes, automated reporting, audit trails, and compliance with regulated environments (e.g., 21 CFR Part 11).
- **Physical and Integration Requirements**: The instrument dimensions should be approximately 77 cm × 84 cm × 48 cm to fit existing laboratory space.
- **Delivery, Installation, and Training**: Delivery and installation must occur within 90 days of contract award. The contractor is responsible for installation, initial on-site and off-site operator training (including applications and method development assistance), and providing all training materials. Additional on-site training may be requested at no extra charge.
- **Service and Maintenance**: An extended warranty or service plan covering telephone support, on-site troubleshooting and repair, all labor, travel, service parts, and consumables is required for the contract duration.
The procurement is classified under NAICS code 334516 (Analytical Laboratory Instrument Manufacturing), with a small business size standard of 1,000 employees, and Product Service Code 6640 (Laboratory Equipment and Supplies). All interested offerors must be registered in SAM.gov with the appropriate NAICS code and, if applicable, verified in the SBA database for SDVOSB/VOSB status at the time of proposal submission.
Vendors are required to provide detailed responses addressing their socio-economic status, manufacturing or authorized distributor status, ability to meet brand name or equal requirements, compliance with trade agreement and subcontracting regulations, and estimated delivery timelines. The Government emphasizes that this is a sources sought notice for planning and informational purposes only; it does not constitute a solicitation or a commitment to award a contract.
The place of performance is Dallas, TX. The primary point of contact for this notice is Kathryn Prose, who can be reached at [email protected] or (254) 217-2835. Responses are due by April 28, 2026, at 12:00 pm EST.
For further details and to access the full notice, interested parties should refer to the SAM.gov opportunity at: https://sam.gov/opp/56127a30a14c466ebbc8aaca888ab3f8/view.