SCREW,CAP,SOCKET HE
Key Dates
Due Date
-
Posted Date
-
Agency & Value
Agency
NAVSUP WEAPON SYSTEMS SUPPORT MECH
Contract Value
Not provided
Codes & Classification
Solicitation Number
N0010426QFD25
NAICS
332722 - Bolt, Nut, Screw, Rivet, and Washer Manufacturing
Classification Code
5305
Additional Details
Documents1
The Department of the Navy, through NAVSUP Weapon Systems Support Mechanicsburg (NAVSUP WSS), has issued a solicitation (Procurement Identifier: N0010426QFD25) for the supply of Socket Head Cap Screws, classified under Product Service Code 5305 and NAICS Code 332722 (Bolt, Nut, Screw, Rivet, and Washer Manufacturing). This procurement is critical to the operational integrity of shipboard systems, with the supplied material designated as SPECIAL EMPHASIS (Level I, Scope of Certification, or Quality Assured), reflecting its role in preventing catastrophic failures that could result in serious injury, loss of life, or loss of vital shipboard systems.
**Purpose and Scope**
The primary objective of this solicitation is to procure Socket Head Cap Screws conforming to Marotta drawing 235445-0003, Item 60, with specific amplifications and modifications as detailed in the contract. These fasteners are intended for use in crucial shipboard systems, necessitating rigorous quality assurance and traceability controls to ensure compliance with all technical and safety requirements.
**Key Requirements and Deliverables**
- **Material and Certification:** The screws must be manufactured from MIL-DTL-1222, Grade 630 material, with chemical properties per ASTM-F593 and mechanical properties per MIL-DTL-1222, Table II. Quantitative chemical and mechanical analysis is mandatory, and certifications must be provided for all required tests, including Liquid Penetrant or Magnetic Particle Inspection (Wet Method), performed in accordance with T9074-AS-GIB-010/271 and MIL-DTL-1222.
- **Traceability:** Complete traceability is required for each fastener, including an additional fastener per heat/lot for each shipment. Certification data must be uniquely identified and permanently marked on each item, ensuring direct traceability to material composition and mechanical properties.
- **Testing and Inspection:** Thread inspection must follow FED-STD-H28 series or ASME B1 series (commercial equivalent). Wedge tensile tests are required for each production lot, with specific wedge angles based on fastener size and grade. All inspection and test records must be maintained and made available for government review.
- **Quality System:** Contractors must maintain a quality system compliant with ISO-9001 (or MIL-I-45208 as an alternate), with calibration systems per ISO-10012 or ANSI-Z540.3/ISO-17025. The quality system and procedures are subject to government audit and must be documented and available for review.
- **Configuration Control:** Contractors are responsible for maintaining baseline configuration and must submit Engineering Change Proposals (ECPs) for any modifications affecting form, fit, function, or interface parameters.
- **Packaging and Marking:** Preservation, packaging, packing, and marking must comply with MIL-STD 2073 and contract-specific requirements. Fasteners must be marked with material symbol, manufacturer identification, and traceability marking, applied per MIL-DTL-1222 and MIL-STD-792.
- **Government Source Inspection:** The contract provides for government quality assurance at source, and contractors must notify the appropriate government representative or DCMA office upon receipt of the order.
- **Data Submission:** Certification documentation must be submitted to Portsmouth Naval Shipyard (DODAAC N50286) for review and acceptance prior to shipment, via Wide Area Work Flow (WAWF). No material may be shipped before acceptance is received.
**Contracting Entity and Contact Information**
- **Contracting Office:** NAVSUP Weapon Systems Support Mechanicsburg (NAVSUP WSS)
- **Department:** Department of Defense, Department of the Navy
- **Primary Contact:** Alana M. Boyer, Telephone: 717-605-1234, Email: [email protected]
- **Notice URL:** [SAM.gov Opportunity](https://sam.gov/opp/52c1cee07b534d9e9b6a4276459248a9/view)
**Procurement Type and Special Considerations**
This is a fixed-price solicitation, issued under Emergency Acquisition Flexibilities (EAF), and is a "DO" rated order under the Defense Priorities and Allocations System (DPAS), certified for national defense use. The procurement invokes the Buy American and Free Trade Agreements clauses, and includes requirements for small business subcontracting plans and security prohibitions/exclusions. The warranty of supplies is for one year from the date of delivery.
**Constant Elements Throughout Contract Lifecycle**
- The requirement for rigorous quality assurance, traceability, and certification will remain constant.
- Compliance with all referenced specifications, standards, and drawings is mandatory.
- Government source inspection and acceptance procedures will be enforced for every shipment.
- Configuration control, marking, and packaging requirements will persist throughout the contract.
- The contract will continue to be governed by DPAS priority rating and emergency acquisition flexibilities.
**Summary for Contractors**
Contractors considering this opportunity should possess robust manufacturing capabilities for high-integrity fasteners, a mature quality management system, and experience with traceability and certification for critical safety items. The ability to comply with stringent government inspection, configuration control, and data submission requirements is essential. This solicitation represents a significant opportunity to support the U.S. Navy’s operational readiness, but demands strict adherence to technical, quality, and administrative requirements.
Interested parties should review the full solicitation and attachments via SAM.gov and direct any inquiries to the primary contact listed above. Responses are due by May 5, 2026.