SCREW,CAP,SOCKET HE
Key Dates
Due Date
-
Posted Date
-
Agency & Value
Agency
NAVSUP WEAPON SYSTEMS SUPPORT MECH
Contract Value
Not provided
Codes & Classification
Solicitation Number
N0010426QNB69
NAICS
332722 - Bolt, Nut, Screw, Rivet, and Washer Manufacturing
Classification Code
5305
Additional Details
Documents4
The Department of the Navy, through NAVSUP Weapon Systems Support Mechanicsburg (NAVSUP WSS), has issued a solicitation (Procurement Identifier: N0010426QNB69) for the supply of a critical shipboard fastener: Screw, Cap, Socket Head, Self-Locking. This procurement is classified under NAICS Code 332722 (Bolt, Nut, Screw, Rivet, and Washer Manufacturing) and Product Service Code 5305, reflecting its focus on specialized fastener manufacturing for defense applications.
**Purpose and Scope**
The primary purpose of this procurement is to acquire screws that are integral to crucial shipboard systems. The material is designated as "Special Emphasis" (Level I, Scope of Certification, or Quality Assured), underscoring its criticality: incorrect or defective material could result in catastrophic failure, serious injury, loss of life, or loss of vital shipboard systems. As such, the contract invokes stringent control procedures to ensure the correct material is received and installed.
**Key Requirements and Objectives**
Contractors are required to manufacture and supply socket head cap screws with self-locking features, conforming to MIL-DTL-1222 and other referenced specifications. The screws must be:
- Type II, Grade 500 (QQ-N-286), solution annealed and age hardened
- 1 1/2 inch diameter, 5 3/4 inch length, 6 UNRC thread series, 2A class of fit, chamfered end configuration
- Marked for traceability, including material symbol, manufacturer’s identification, and unique traceability marking
- Self-locking element in accordance with MIL-DTL-18240
- Mercury-free, with no intentional addition or contact with mercury or mercury compounds
The contract requires comprehensive testing and certification, including:
- Liquid penetrant inspection (per T9074-AS-GIB-010/271 and MIL-DTL-1222)
- Ultrasonic inspection for starting material (for items made from QQ-N-286 with diameter ≥4 inches)
- Mechanical property testing (tensile, yield, elongation, hardness) on full-size fasteners
- Wedge tensile tests for headed fasteners, with specific wedge angles based on diameter and grade
- Slow strain rate tensile tests performed by approved laboratories
Traceability and certification are paramount. Contractors must maintain complete traceability from material to certification test reports and Objective Quality Evidence (OQE). Certification data must be submitted to Portsmouth Naval Shipyard for review and acceptance prior to each shipment, via Wide Area Work Flow (WAWF), and no material may be shipped before acceptance.
**Quality Assurance and Deliverables**
The contract mandates a robust quality system, compliant with ISO-9001 (or MIL-I-45208 as an alternate), and calibration systems per ISO-10012 or ANSI-Z540.3 with ISO-17025. Quality system documentation must be available for government review, and government quality assurance will be performed at the source. Inspection records, test certifications, and material traceability documentation are required for all supplied items.
Deliverables include:
- The specified screws, manufactured and tested per contract requirements
- Certificates of compliance, traceable to each item and heat/lot
- Test certification reports (chemical, mechanical, NDT)
- Inspection and test plans (unless waived by NAVSUP WSS Mechanicsburg)
- Quality system procedures (for Level I/SUBSAFE material suppliers)
Preservation, packaging, packing, and marking must comply with MIL-STD 2073 and contract schedule requirements.
**Contracting Entity and Contact Information**
The contracting entity is NAVSUP Weapon Systems Support Mechanicsburg, a federal office under the Department of Defense, Department of the Navy. The primary point of contact is Heather R. Jones, reachable at 717-605-4866 or [email protected]. The solicitation is active, with a response deadline of May 15, 2026. Further details and attachments are available at the SAM.gov opportunity page: https://sam.gov/opp/2466183c92c14642beabc5924431b712/view.
**Procurement Type and Special Considerations**
This is a fixed-price solicitation, set aside for small businesses, as indicated by the Notice of Total Small Business Set-Aside. Emergency Acquisition Flexibilities (EAF) apply, and the resultant award will be issued bilaterally, requiring written acceptance by the contractor. The contract is DO certified under the Defense Priorities and Allocations System (DPAS), reflecting its national defense priority.
Special considerations include:
- Past performance will be evaluated per FAR 13.106(a)(2)
- Access to drawings may require request and approval via SAM.gov and email to the listed POC
- Waivers and deviations require contracting officer approval and must be submitted via email
- Configuration control and engineering change proposals (ECPs) are required for any modifications affecting form, fit, function, or interface parameters
**Constant Elements Throughout Contract Lifecycle**
Throughout the contract lifecycle, the following elements remain constant:
- The critical safety nature of the item and associated quality assurance requirements
- The requirement for traceability, certification, and compliance with invoked specifications
- The need for robust quality systems and government source inspection
- The prohibition of mercury and strict material control procedures
- The requirement for packaging, marking, and documentation per contract and military standards
**Summary for Contractors**
Contractors considering this opportunity should have proven capabilities in manufacturing high-integrity fasteners for defense applications, with established quality systems, traceability protocols, and experience in meeting rigorous testing and certification requirements. The contract is highly technical, with detailed specifications and quality assurance mandates, and is suitable for small businesses specializing in critical shipboard hardware. Compliance with all documentation, testing, and traceability requirements is essential for successful performance and acceptance.
For further information or to access solicitation documents, contractors should contact Heather R. Jones at NAVSUP WSS Mechanicsburg or visit the SAM.gov opportunity page.