STUD,PLAIN
Key Dates
Due Date
-
Posted Date
-
Agency & Value
Agency
NAVSUP WEAPON SYSTEMS SUPPORT MECH
Contract Value
Not provided
Codes & Classification
Solicitation Number
N0010426QNC06
NAICS
332722 - Bolt, Nut, Screw, Rivet, and Washer Manufacturing
Classification Code
5307
Additional Details
Documents3
The Department of the Navy, through NAVSUP Weapon Systems Support (WSS) Mechanicsburg, has issued a solicitation (Procurement Identifier: N0010426QNC06) for the supply of a critical component identified as "STUD, PLAIN." This procurement is classified under NAICS code 332722 (Bolt, Nut, Screw, Rivet, and Washer Manufacturing) and Product Service Code 5307, indicating a focus on specialized fastener manufacturing for defense applications. The opportunity is a total small business set-aside, inviting qualified small business manufacturers and distributors to participate.
**Purpose and Scope**
The primary objective of this procurement is to acquire studs that are integral to a crucial shipboard system. The nature of the application is such that the use of incorrect or defective material could result in catastrophic consequences, including serious personnel injury, loss of life, or the loss of vital shipboard systems or the ship itself. As such, the material is designated as SPECIAL EMPHASIS material (Level I, Scope of Certification, or Quality Assured), invoking stringent control and quality assurance procedures to ensure the delivery of correct and fully compliant material.
**Key Requirements and Deliverables**
- **Technical Specifications:** The studs must be manufactured in accordance with Curtiss-Wright drawing PL14590N18, item 178A, and drawing 14717N18, with any modifications or amplifications as specified in the solicitation. The material required is QQ-N-286, Form 2, annealed and age hardened K-MONEL, with full traceability and certification.
- **Testing and Certification:** Contractors must provide quantitative chemical and mechanical analysis, and certifications for liquid penetrant inspection, ultrasonic inspection (for material 4 inches or greater in diameter or as otherwise specified), and mechanical properties (tensile, yield, elongation, and hardness) per MIL-DTL-1222. All testing must be performed by approved laboratories listed in the solicitation.
- **Traceability and Marking:** Complete traceability from raw material to finished product is mandatory. Each fastener must be permanently marked in accordance with MIL-DTL-1222 and MIL-STD-792, including material symbol, manufacturer’s identification, and traceability marking. Certification data must be directly linked to these markings.
- **Quality Assurance:** The contractor must maintain a quality system compliant with ISO-9001 (or MIL-I-45208 as an alternate), with calibration systems per ISO-10012, ISO/IEC 17025, or ANSI/NCSL Z540.3. The quality system and all related documentation are subject to government review and audit at any time.
- **Inspection and Acceptance:** Government Quality Assurance at source is required, and the place of performance may not be changed without authorization. All inspection records, test results, and certification data must be available for government review. No material may be shipped prior to receipt of government acceptance.
- **Packaging:** Preservation, packaging, packing, and marking must comply with MIL-STD-2073 and any additional requirements specified in the contract schedule.
- **Documentation:** Certificates of compliance, test certifications, and material certification reports must be submitted via Wide Area Work Flow (WAWF) and accepted by Portsmouth Naval Shipyard prior to shipment. The documentation must include detailed traceability, test results, and compliance statements as outlined in the solicitation.
**Contracting Entity and Contact Information**
- **Contracting Office:** NAVSUP Weapon Systems Support Mechanicsburg (NAVSUP WSS MECH)
- **Department/Agency:** Department of Defense, Department of the Navy
- **Primary Contact:** April N. Schlusser, Phone: 771-229-0555, Email: [email protected]
- **Notice URL:** [SAM.gov Opportunity](https://sam.gov/opp/f7df31d454894e208cd6460cae0563ec/view)
**Procurement Type and Special Considerations**
- **Solicitation Type:** This is a formal solicitation for a fixed-price supply contract.
- **Set-Aside:** The opportunity is a total small business set-aside, restricting competition to qualified small business concerns.
- **Emergency Acquisition Flexibilities:** The requirement is issued under Emergency Acquisition Flexibilities (EAF), and the resultant award will be a bilateral agreement requiring written contractor acceptance.
- **Defense Priorities and Allocations System (DPAS):** The contract will be rated (DO/DX) for national defense, emergency preparedness, and energy program use, requiring priority performance.
- **Original Equipment Manufacturer (OEM) Requirements:** If the offeror is not the OEM, a signed letter of authorization from the OEM is required. Packaging at a location different from the offeror’s address must be disclosed.
- **Subcontracting and Supplier Control:** The prime contractor is responsible for ensuring all sub-tier suppliers meet the same quality and traceability requirements, with periodic audits and documented supplier selection criteria.
**Constant Elements Over Contract Lifecycle**
- The requirement for full material traceability, rigorous quality assurance, and compliance with all specified standards and drawings will remain unchanged throughout the contract.
- The need for government source inspection, documentation submission via WAWF, and acceptance prior to shipment are enduring requirements.
- The contract’s classification as a critical safety item (CSI) and the associated special emphasis on quality and configuration control will persist for the duration of the contract.
**Summary for Contractors**
This solicitation represents a highly controlled, technically demanding procurement for critical shipboard fasteners. Contractors must demonstrate robust quality management systems, proven experience with high-reliability fastener manufacturing, and the ability to maintain comprehensive traceability and certification throughout the supply chain. The opportunity is well-suited for small businesses with established defense contracting experience, particularly those familiar with Level I/SUBSAFE material requirements and the associated documentation, inspection, and compliance protocols. Interested parties should carefully review the referenced specifications, drawings, and quality assurance requirements to ensure full alignment with their capabilities and processes.
For further details, attachments, and to submit a response, contractors should refer to the official notice on SAM.gov and direct any questions to the contracting officer listed above. The response deadline is May 15, 2026.