STUD,CONTINUOUS THR

Key Dates
Due Date

-

Posted Date

-

Agency & Value
Agency

NAVSUP WEAPON SYSTEMS SUPPORT MECH

Contract Value

Not provided

Codes & Classification
Solicitation Number

N0010426QNC03

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer Manufacturing

Classification Code

5307

Additional Details
Set Aside

None

Place of Performance

-

SourceSAM
Documents4
The Department of the Navy, through the Naval Supply Systems Command (NAVSUP) Weapon Systems Support (WSS) Mechanicsburg, has issued a solicitation (Procurement Identifier: N0010426QNC03) for the manufacture and delivery of a "Stud, Continuous Thread." This procurement is classified under NAICS code 332722 (Bolt, Nut, Screw, Rivet, and Washer Manufacturing) and Product Service Code 5307, indicating a focus on specialized fastener production for critical shipboard applications. **Purpose and Scope** The primary objective of this solicitation is to acquire continuous thread studs for use in crucial shipboard systems. These components are designated as "Special Emphasis Material" (Level I, Scope of Certification, or Quality Assured), reflecting their criticality to ship safety and operational integrity. The failure or nonconformance of these items could result in severe consequences, including personnel injury, loss of life, or catastrophic system failure. As such, the procurement invokes stringent quality assurance, traceability, and certification requirements to ensure only fully compliant material is delivered and installed. **Key Requirements and Deliverables** Contractors are required to manufacture and supply continuous thread studs conforming to MIL-DTL-1222, with the following specific attributes: - Material: K-MONEL, Grade 500 (QQ-N-286), solution annealed and age hardened - Size: 1 3/8 inch diameter, 9 inches in length - Thread Series: 6 UNC, Class 3A fit - End Configuration: .06 x 45-degree chamfer on both ends - Marking: As per MIL-DTL-1222 and MIL-STD-792, including traceability codes, material symbol, and manufacturer identification - Testing: Liquid penetrant inspection, ultrasonic inspection (for starting material ≥4 inches or as otherwise specified), axial tensile tests, and full mechanical property verification per applicable standards - Certification: Comprehensive test and material certifications, including chemical and mechanical analysis, must be submitted and accepted prior to shipment - Packaging: In accordance with MIL-STD-2073 and contract schedule requirements Each shipment must include one additional fastener per uniquely identified heat/lot for traceability and testing purposes. All certifications and objective quality evidence (OQE) must be submitted via the Wide Area Workflow (WAWF) system and accepted by Portsmouth Naval Shipyard before any material is shipped. **Quality Assurance and Compliance** The contract mandates a robust quality system, compliant with ISO 9001 (or MIL-I-45208 as an alternate), and calibration systems per ISO 10012 or ANSI-Z540.3 with ISO 17025. Government Quality Assurance (GQA) at source is required, and the contractor’s quality system and procedures are subject to government review and audit throughout the contract lifecycle. All inspection and test records must be maintained and traceable to the material supplied. Traceability is a central requirement: all material must be traceable from raw stock through all processing steps to the finished product, with unique markings and corresponding certification data. Any process that alters material properties requires re-identification and re-certification. Mercury or mercury-containing compounds are strictly prohibited. Subcontractor oversight is also emphasized. The prime contractor must ensure all sub-tier suppliers meet the same quality and traceability standards, with periodic audits and documented supplier selection criteria. **Contracting Entity and Contact Information** - Contracting Entity: NAVSUP Weapon Systems Support Mechanicsburg (NAVSUP WSS MECH) - Department: Department of Defense, Department of the Navy - Primary Contact: April N. Schlussser, Telephone: 771-229-0555, Email: [email protected] - Notice URL: [SAM.gov Opportunity](https://sam.gov/opp/7b5af1302f444b80b1311dc1f6194be0/view) **Procurement Type and Special Considerations** This is a fixed-price solicitation issued under Emergency Acquisition Flexibilities (EAF) and is a total small business set-aside. The resultant award will be bilateral, requiring written contractor acceptance. The contract is certified for national defense under the Defense Priorities and Allocations System (DPAS), with a priority rating for national defense, emergency preparedness, and energy program use. Contractors must request access to any included drawings via the solicitation page on SAM.gov and notify the listed point of contact. Past performance will be considered in accordance with FAR 13.106(a)(2). **Constant Elements Over Contract Lifecycle** - The requirement for strict adherence to all referenced military and federal specifications and standards - Maintenance of full material traceability and comprehensive certification throughout all production and delivery phases - Government source inspection and acceptance prior to shipment - Ongoing compliance with quality system requirements and government audit rights - Prohibition of material substitutions, waivers, or deviations without explicit Contracting Officer approval **Summary for Contractors** This opportunity is suited for small businesses with demonstrated expertise in manufacturing high-integrity fasteners for defense applications, robust quality management systems, and the ability to maintain rigorous traceability and certification protocols. The contract’s critical safety designation and national defense priority underscore the need for exceptional process control, documentation, and compliance with all technical and administrative requirements. Interested contractors should carefully review the solicitation and all referenced specifications, ensure their quality systems and supplier controls meet the stated requirements, and be prepared to submit comprehensive certification data for government review and acceptance prior to shipment. For further information or to request access to controlled documents, contact April N. Schlussser at [email protected] or 771-229-0555. Response deadline: May 15, 2026, 20:05.