DISK,VALVE
Key Dates
Due Date
-
Posted Date
-
Agency & Value
Agency
NAVSUP WEAPON SYSTEMS SUPPORT MECH
Contract Value
Not provided
Codes & Classification
Solicitation Number
N0010426QZB18
NAICS
332919 - Other Metal Valve and Pipe Fitting Manufacturing
Classification Code
4820
Additional Details
Documents1
The Department of the Navy, through the Naval Supply Systems Command (NAVSUP) Weapon Systems Support office in Mechanicsburg, PA, has issued a solicitation (Procurement Identifier: N0010426QZB18) for the supply of a specialized disk valve assembly. This procurement is classified under NAICS code 332919 (Other Metal Valve and Pipe Fitting Manufacturing) and Product Service Code 4820, indicating its focus on shipboard valve components critical to naval operations.
**Purpose and Scope**
The primary objective of this solicitation is to acquire a Poppet & Seat Assembly for a Regulator Valve Assembly, specifically in accordance with Vacco Industries drawing V3D10254, item 1, Assembly part number V3C10290-TB. This component is designated as SPECIAL EMPHASIS material (Level I, Scope of Certification, or Quality Assured) due to its application in crucial shipboard systems. The failure or malfunction of this item could result in severe consequences, including personnel injury, loss of life, or catastrophic damage to shipboard systems or the vessel itself. As such, the procurement is rated as a DO priority under the Defense Priorities and Allocation System, reflecting its national defense and emergency preparedness significance.
**Key Requirements and Deliverables**
Contractors are required to deliver a disk valve assembly that meets stringent technical, quality, and traceability standards. Key requirements include:
- **Oxygen Cleaning:** All materials must be cleaned, tested, packaged, and labeled by trained personnel in accordance with MIL-STD-1330.
- **Material Certification:** Quantitative chemical and mechanical analysis is required for specific parts (e.g., Stem and Stem Guide, using SAE AMS 5643, Condition H-1025).
- **Non-Destructive Testing:** Certifications for weld repairs and/or production welds must be provided per applicable fabrication specifications.
- **Welding and Brazing:** All welding and brazing must comply with NAVSEA standards (S9074-AR-GIB-010A/278, 0900-LP-001-7000, S9074-AQ-GIB-010/248), with procedures and qualification data submitted for approval prior to work.
- **Thread Inspection:** All threads must be inspected per FED-STD-H28 or ASME B1 series, with specific requirements for internal threads and O-ring groove inspections.
- **Configuration Control:** Contractors must maintain baseline configuration and submit any waivers, deviations, or engineering change proposals for government approval.
- **Traceability:** Full traceability from raw material to finished product is mandatory, with permanent marking and certification data linking each item to its material properties.
- **Quality Assurance:** A quality system compliant with ISO-9001 (or MIL-I-45208 as an alternate) and calibration systems per ISO-10012 or ANSI-Z540.3/ISO-17025 is required. Government Quality Assurance at source is stipulated, and the contractor’s quality system is subject to audit.
- **Documentation and Certification:** Certificates of compliance, test certifications, and material certification reports must be submitted and accepted by Portsmouth Naval Shipyard prior to shipment. All documentation must be submitted via the Wide Area Work Flow (WAWF) system, with specific instructions for notification and acceptance.
- **Packaging:** Preservation, packaging, and marking must comply with MIL-STD-2073 and contract-specific requirements.
**Contracting Entity and Contact Information**
- **Contracting Office:** NAVSUP Weapon Systems Support, Mechanicsburg, PA
- **Department:** Department of Defense, Department of the Navy
- **Primary Contact:** Jeffrey A. Dietrich, 717-605-4078, [email protected]
**Procurement Type and Special Considerations**
This is a fixed-price solicitation issued under Emergency Acquisition Flexibilities (EAF), reflecting the urgent and high-priority nature of the requirement. The procurement is not explicitly set aside for small businesses, but compliance with the Buy American Act, Free Trade Agreements, and Balance of Payments Program is required. A Small Business Subcontracting Plan may be applicable for larger contractors.
Partial and early deliveries are authorized and encouraged, provided they are at no additional cost to the government. The procurement invokes Level I Source Certification and requires oxygen cleaning, Level I traceability, and compliance with all referenced military and federal standards. The item is classified as a Critical Safety Item (CSI), and all associated processes, documentation, and quality controls must reflect this designation.
**Constant Elements Over Contract Lifecycle**
Throughout the contract, the following elements will remain constant:
- The requirement for strict adherence to technical drawings, specifications, and quality standards.
- The necessity for comprehensive traceability and certification for all materials and processes.
- The obligation to maintain and document a robust quality assurance system, subject to government audit and approval.
- The use of WAWF for all certification and acceptance documentation.
- The criticality of the item to shipboard safety and mission assurance, mandating rigorous configuration and change control.
**Summary for Contractors**
This opportunity is suited for contractors with proven experience in manufacturing high-reliability, precision valve assemblies for defense or similar critical applications. Prospective offerors must demonstrate robust quality management systems, the ability to perform and document specialized cleaning and testing processes, and the capacity to manage complex traceability and certification requirements. Familiarity with Navy and DoD procurement protocols, including electronic data submission and government source inspection, is essential.
Interested parties should review the full solicitation and referenced documents for detailed technical and quality requirements. All inquiries and submissions should be directed to the contracting officer listed above. The solicitation remains active, with responses due by December 11, 2026.
For further details and access to attachments, visit the official notice at: [SAM.gov Opportunity](https://sam.gov/opp/7cfddd0e31384817951d22779d0b8595/view).