STEM,FLUID VALVE
Key Dates
Due Date
-
Posted Date
-
Agency & Value
Agency
NAVSUP WEAPON SYSTEMS SUPPORT MECH
Contract Value
Not provided
Codes & Classification
Solicitation Number
N0010426QZA88
NAICS
332919 - Other Metal Valve and Pipe Fitting Manufacturing
Classification Code
4820
Additional Details
Documents1
The Department of the Navy, through NAVSUP Weapon Systems Support (NAVSUP WSS) Mechanicsburg, has issued a solicitation (N0010426QZA88) for the procurement of a STEM, FLUID VALVE, classified under Product Service Code 4820 (Valves, Nonpowered) and NAICS Code 332919 (Other Metal Valve and Pipe Fitting Manufacturing). This procurement is a Total Small Business Set-Aside, inviting qualified small business manufacturers with relevant experience and capabilities to participate.
**Purpose and Scope**
The STEM, FLUID VALVE to be procured is a critical component intended for use in a vital shipboard system. The nature of this application means that the supplied material is designated as SPECIAL EMPHASIS material (Level I, Scope of Certification, or Quality Assured), reflecting the high consequence of failure—potentially resulting in serious personnel injury, loss of life, or loss of essential shipboard systems. As such, the procurement invokes stringent quality assurance, traceability, and certification requirements to ensure the integrity and reliability of the delivered product.
**Key Requirements and Deliverables**
- **Technical Specifications:** The stem must be manufactured in accordance with NAVSEA drawing 6405339, Find 3, with specific modifications and amplifications as detailed in the solicitation. Weld repair is strictly prohibited on QQ-N-286 material.
- **Material and Testing:** The stem must be fabricated from QQ-N-286, Form 2, cold drawn, annealed, and age-hardened material. Quantitative chemical and mechanical analysis is required, and certifications must be provided for annealing, age hardening, and ultrasonic inspection (for starting material with a diameter or minimum distance between parallel surfaces of 4 inches or greater, or as otherwise specified).
- **Testing Laboratories:** Slow strain rate tensile testing of QQ-N-286 must be performed by one of several specified, pre-approved laboratories, including Huntington Alloys, Metallurgical Consultants, Naval Surface Warfare Center Carderock, Teledyne Allvac, Westmoreland Mechanical Testing, Mannesmann Rohrenwerke, or ThyssenKrupp VDM USA.
- **Quality Assurance:** Contractors must maintain a quality system compliant with ISO 9001 (or MIL-I-45208), with calibration systems per ISO 10012 or ANSI-Z540.3 with ISO 17025. The quality system and all products are subject to government evaluation, verification, and inspection.
- **Traceability and Certification:** Full traceability from material to certification test reports is mandatory. Certification data must be submitted to Portsmouth Naval Shipyard for review and acceptance prior to shipment, via the Wide Area Work Flow (WAWF) system. No material may be shipped before acceptance is received.
- **Inspection and Acceptance:** Government Quality Assurance (GQA) at source is required. The contractor must notify the appropriate government representative or DCMA office upon receipt of the order to coordinate inspection.
- **Packaging:** Preservation, packaging, packing, and marking must comply with MIL-STD-2073 and contract-specific requirements.
- **Configuration Control:** The contractor is responsible for maintaining the equipment baseline configuration and must submit Engineering Change Proposals (ECPs) for any modifications affecting form, fit, function, or interface.
- **Mercury-Free Requirement:** No mercury or mercury-containing compounds may be intentionally added or come into contact with the hardware or supplies.
- **Data and Documentation:** Certificates of compliance, test certifications, and material certifications must be positive, unqualified, and reference all applicable standards and revisions. Electronic signatures are permitted under controlled conditions.
**Contracting Entity and Contact Information**
- **Contracting Office:** NAVSUP Weapon Systems Support Mechanicsburg (NAVSUP WSS MECH)
- **Department:** Department of Defense, Department of the Navy
- **Primary Contact:** Robert H. Langel, Telephone: 717-605-3353, Email: [email protected]
- **Submission Portal:** https://sam.gov/opp/118d7dd8188f4c97a187bde04cb7daa6/view
**Procurement Type and Special Considerations**
- **Procurement Type:** Fixed-price supply contract, issued bilaterally (requiring contractor’s written acceptance).
- **Set-Aside:** Total Small Business Set-Aside.
- **Emergency Acquisition Flexibilities (EAF):** This requirement is being pursued under EAF, reflecting its urgency and importance to national defense.
- **DPAS Rating:** The resultant contract will be DO-rated under the Defense Priorities and Allocations System (DPAS), indicating priority for national defense.
- **Drawings and Data:** Technical drawings are available on SAM.gov; access must be requested via the solicitation page and coordinated with the listed POC.
- **Past Performance:** NAVSUP WSS will consider past performance in the evaluation of offers.
**Constant Elements Over Contract Lifecycle**
Throughout the contract, the following elements will remain constant:
- The requirement for strict adherence to technical specifications, quality assurance, and traceability.
- The necessity for government source inspection and acceptance prior to shipment.
- The obligation to maintain and document a compliant quality system.
- The need for configuration control and prompt communication regarding any waivers, deviations, or engineering changes.
- The prohibition of mercury and the requirement for positive, unqualified certification statements.
- The use of WAWF for submission of all certification data and documentation.
**Conclusion**
This solicitation represents a highly controlled, technically demanding procurement for a critical shipboard valve stem. Contractors must demonstrate robust quality systems, experience with Level I/SUBSAFE material, and the ability to comply with all traceability, certification, and inspection requirements. The opportunity is well-suited for small businesses specializing in precision metal valve and pipe fitting manufacturing, with established processes for government contracting and defense-related quality assurance.
Interested parties should review the full solicitation and associated drawings on SAM.gov, ensure compliance with all requirements, and direct any questions to the contracting officer listed above. The response deadline is July 8, 2026.