STEM,FLUID VALVE
Key Dates
Due Date
-
Posted Date
-
Agency & Value
Agency
NAVSUP WEAPON SYSTEMS SUPPORT MECH
Contract Value
Not provided
Codes & Classification
Solicitation Number
N0010426QZA86
NAICS
332919 - Other Metal Valve and Pipe Fitting Manufacturing
Classification Code
4820
Additional Details
Documents1
The Department of the Navy, through the Naval Supply Systems Command (NAVSUP) Weapon Systems Support (WSS) Mechanicsburg, has issued a solicitation (N0010426QZA86) for the procurement of a STEM, FLUID VALVE component. This procurement is classified under NAICS code 332919 (Other Metal Valve and Pipe Fitting Manufacturing) and Product Service Code 4820, indicating its relevance to contractors specializing in the manufacture of metal valves and pipe fittings for critical applications.
**Purpose and Scope**
The primary objective of this solicitation is to acquire 29 units of a stem for a 6-inch ball valve, intended for use in a crucial shipboard system. The component is designated as SPECIAL EMPHASIS material (Level I, Scope of Certification, or Quality Assured), reflecting its criticality to ship safety and operational integrity. The failure or nonconformance of this material could result in severe consequences, including personnel injury, loss of life, or catastrophic failure of shipboard systems. As such, the procurement invokes stringent quality assurance, traceability, and certification requirements to ensure the highest standards of material integrity and performance.
**Key Requirements and Deliverables**
- **Technical Specifications:** The stem must be manufactured in accordance with Navy Sea Systems Command Drawing 7285216, piece 52, with specific requirements and modifications detailed in the solicitation. No weld repair is permitted on QQ-N-286 material, which must be supplied in form 2, annealed and age-hardened.
- **Testing and Certification:** Quantitative chemical and mechanical analysis is required for the stem, with certifications for annealing, age hardening, and ultrasonic inspection of starting material. Only specified laboratories are authorized to perform the Slow Strain Rate Tensile Test on QQ-N-286 material.
- **Thread and Surface Inspection:** All threads must be inspected per FED-STD-H28 or ASME B1 series, with specific system requirements based on drawing references. O-ring grooves and sealing surfaces must be inspected per contractually invoked criteria, with repairs subject to approval if outside specified tolerances.
- **Traceability and Compliance:** Full traceability from material to certification test reports is mandatory. Certification data must be submitted to Portsmouth Naval Shipyard for review and acceptance prior to shipment, and no material may be shipped without formal acceptance.
- **Quality System:** Contractors must maintain a quality system compliant with ISO-9001 (or MIL-I-45208), with calibration systems per ISO-10012 or ANSI-Z540.3/ISO-17025. The system is subject to government evaluation and must be documented and available for review.
- **Packaging:** Preservation, packaging, and marking must comply with MIL-STD-2073 and contract-specific requirements.
- **Warranty:** A one-year warranty from the date of delivery is required for all supplied items.
**Contracting Entity and Contact Information**
- **Contracting Office:** NAVSUP Weapon Systems Support Mechanicsburg (NAVSUP WSS MECH)
- **Department:** Department of Defense, Department of the Navy
- **Primary Contact:** Robert H. Langel, Telephone: 717-605-3353, Email: [email protected]
- **Submission and Acceptance:** Certification documentation must be submitted via Wide Area Work Flow (WAWF), with specific instructions for notification and acceptance by Portsmouth Naval Shipyard.
**Procurement Type and Special Considerations**
This is a fixed-price solicitation, issued as a total small business set-aside, restricting competition to qualified small business concerns. The procurement is DO certified under the Defense Priorities and Allocations System (DPAS), indicating priority for national defense and emergency preparedness. All contractual documents will be issued bilaterally, requiring written contractor acceptance.
**Evaluation and Compliance**
NAVSUP WSS will consider past performance in the evaluation of offers. Contractors must adhere to all requirements for configuration control, waivers/deviations, and engineering change proposals as outlined in the solicitation. Government Quality Assurance (GQA) will be performed at the source, and the place of performance may not be changed without contracting officer authorization.
**Constant Elements Over Contract Lifecycle**
- The critical safety nature of the item and associated quality, traceability, and compliance requirements will remain unchanged.
- The requirement for a robust, auditable quality system and full material traceability will persist throughout the contract.
- All certifications, inspections, and acceptance procedures will be enforced for each delivery.
- The contract will maintain strict controls on configuration management, waivers, deviations, and engineering changes.
**Conclusion**
This solicitation represents a highly specialized and controlled procurement for a critical shipboard valve stem, demanding rigorous adherence to technical, quality, and traceability standards. Contractors with demonstrated experience in Level I/SUBSAFE material manufacturing, robust quality systems, and the ability to comply with Navy-specific documentation and certification protocols are encouraged to review the full solicitation and associated drawings (available via SAM.gov) and consider submitting a proposal. The opportunity is active, with all inquiries and submissions directed to the NAVSUP WSS point of contact.
For further details and access to technical drawings, contractors should refer to the official solicitation page on SAM.gov: [https://sam.gov/opp/59f2d167e1be445cbb4bd0cce0826de0/view](https://sam.gov/opp/59f2d167e1be445cbb4bd0cce0826de0/view).