SHAFT, SHOULDERED

Key Dates
Due Date

-

Posted Date

-

Agency & Value
Agency

NAVSUP WEAPON SYSTEMS SUPPORT MECH

Contract Value

Not provided

Codes & Classification
Solicitation Number

N0010426QFD22

NAICS

333613 - Mechanical Power Transmission Equipment Manufacturing

Classification Code

3040

Additional Details
Set Aside

None

Place of Performance

-

SourceSAM
Documents1
The Department of the Navy, through NAVSUP Weapon Systems Support (NAVSUP WSS) Mechanicsburg, has issued a solicitation (Procurement Identifier: N0010426QFD22) for the supply of a "Shaft, Shouldered" component. This procurement is classified under NAICS code 333613 (Mechanical Power Transmission Equipment Manufacturing) and Product Service Code 3040, indicating its relevance to contractors specializing in the manufacture of mechanical power transmission equipment and related components. **Purpose, Scope, and Intended Outcomes** The primary objective of this procurement is to acquire a critical shipboard component—specifically, a shouldered shaft—that will be used in a vital naval system. The solicitation underscores the essential nature of this part: any deviation, defect, or use of incorrect material could result in catastrophic failure, including serious injury, loss of life, or loss of shipboard systems. As such, the item is designated as "SPECIAL EMPHASIS material" (Level I, Scope of Certification, or Quality Assured), invoking stringent control and quality assurance procedures to ensure only fully compliant material is delivered and installed. **Key Requirements, Objectives, and Deliverables** - **Technical Specifications:** The shouldered shaft (Rod, Push) must be manufactured in strict accordance with NAVORD drawing 3017425, with all requirements and modifications as detailed in the solicitation. The primary material is QQ-N-286 (Form 2 or Form 7, Hot Finished and Age Hardened), and no weld repairs are permitted on this material. - **Testing and Certification:** Quantitative chemical and mechanical analysis is mandatory for the specified parts. Ultrasonic inspection is required for starting material with a diameter or minimum distance between parallel surfaces of 4 inches or greater, or as otherwise specified. All slow strain rate tensile testing of QQ-N-286 must be performed by one of several pre-approved laboratories listed in the solicitation. - **Thread and Surface Inspection:** All threads must be inspected per FED-STD-H28 or ASME B1 series standards. O-ring grooves and sealing surfaces must be inspected per contractually invoked drawings or, where not specified, per the General Acceptance Criteria (GAC). - **Traceability and Compliance:** Full traceability from raw material to finished product is required, with unique traceability markings maintained throughout all processing steps, including subcontracted operations. Certificates of compliance and test certifications must be provided, demonstrating conformance to all specifications, standards, and contract requirements. - **Quality Assurance:** The contractor must maintain a quality system compliant with ISO-9001 (or MIL-I-45208 as an alternative), with calibration systems per ISO-10012, ANSI-Z540.3, and ISO-17025. The quality system and all related documentation are subject to government review, audit, and approval. - **Government Source Inspection:** Government Quality Assurance at source is required, and the place of performance may not be changed without authorization. The Defense Contract Management Agency (DCMA) will be involved in inspection and acceptance processes. - **Packaging and Delivery:** Preservation, packaging, and marking must comply with MIL-STD-2073 and other contract-specific requirements. Early and incremental deliveries are acceptable at no additional cost, but no material may be shipped prior to government acceptance. - **Data Submission:** Certification data must be submitted to Portsmouth Naval Shipyard for review and acceptance prior to each shipment, using the Wide Area Work Flow (WAWF) system. No shipment is authorized until acceptance is confirmed. **Contracting Entity and Contact Information** - **Contracting Office:** NAVSUP Weapon Systems Support Mechanicsburg (NAVSUP WSS Mech) - **Department/Agency:** Department of Defense, Department of the Navy - **Primary Contact:** Amanda L. Bailey, Phone: 717-605-3354, Email: [email protected] - **Notice URL:** [SAM.gov Opportunity](https://sam.gov/opp/2388a1eb00d8409ca3d4911275cc7486/view) **Procurement Type, Set-Aside, and Special Considerations** This solicitation is a total small business set-aside, as indicated by the inclusion of the "Notice of Total Small Business Set-Aside" clause. The procurement is being conducted under Emergency Acquisition Flexibilities, which may impact certain timelines and procedural requirements. The contract is fixed-price, and the government will consider past performance in the evaluation of offers. **Special Considerations** - **Critical Safety Item (CSI):** The shouldered shaft is classified as a Critical Safety Item, meaning its failure could have catastrophic consequences. This designation brings additional scrutiny and documentation requirements. - **Configuration Control:** The contractor is responsible for maintaining configuration control and must submit Engineering Change Proposals (ECPs) for any modifications affecting form, fit, function, or interface. - **Mercury Prohibition:** No mercury or mercury-containing compounds may be used or come into contact with the supplied hardware. - **Data and Drawings:** Drawings are available via restricted access on SAM.gov; vendors must request access and notify the contracting POC. - **Subcontractor Management:** The prime contractor must ensure all sub-tier suppliers comply with the same quality and traceability requirements, including periodic audits and flow-down of certification and traceability obligations. **Constant Elements Over Contract Lifecycle** Throughout the contract, the following elements will remain constant: - The requirement for strict adherence to technical specifications and quality standards. - The need for comprehensive traceability and certification of all materials and processes. - The obligation to maintain and demonstrate a robust quality management system. - The necessity for government source inspection and acceptance prior to shipment. - The critical safety designation and associated heightened controls and documentation. **Summary for Contractors** This opportunity is best suited for small businesses with demonstrated expertise in manufacturing high-precision, safety-critical mechanical components for naval or defense applications. Contractors must have robust quality assurance systems, experience with stringent traceability and certification requirements, and the ability to manage complex documentation and government inspection processes. The solicitation’s requirements for material control, testing, and compliance are extensive and non-negotiable, reflecting the critical nature of the end-use application. Interested parties should carefully review all referenced standards, ensure access to required drawings, and be prepared to meet all certification, inspection, and data submission obligations as outlined in the solicitation. For further information or to request access to restricted documents, contact Amanda L. Bailey at 717-605-3354 or [email protected].