PARTS KIT,BALL VALV
Key Dates
Due Date
-
Posted Date
-
Agency & Value
Agency
NAVSUP WEAPON SYSTEMS SUPPORT MECH
Contract Value
Not provided
Codes & Classification
Solicitation Number
N0010426QFD09
NAICS
332919 - Other Metal Valve and Pipe Fitting Manufacturing
Classification Code
4820
Additional Details
Documents1
The Department of the Navy, through the Naval Supply Systems Command (NAVSUP) Weapon Systems Support office in Mechanicsburg, PA, has issued a solicitation (Procurement Identifier: N0010426QFD09) for the supply of a Parts Kit for a Ball Valve, classified under NAICS code 332919 (Other Metal Valve and Pipe Fitting Manufacturing) and Product Service Code 4820. This procurement is a Total Small Business Set-Aside, inviting qualified small business contractors to submit proposals for this critical requirement.
**Purpose and Scope**
The primary objective of this procurement is to acquire parts kits for 1-1/2 inch hull and backup valves, which are essential components in crucial shipboard systems. The use of incorrect or defective material in these systems could result in catastrophic failure, serious personnel injury, loss of life, or loss of vital shipboard systems, including the ship itself. As such, the material is designated as SPECIAL EMPHASIS material (Level I, Scope of Certification, or Quality Assured), invoking stringent control and quality assurance procedures to ensure the delivery of correct and fully compliant material.
**Key Requirements and Deliverables**
The parts kit must include:
- One Ball (piece 8), manufactured in accordance with Naval Ship Systems Command Drawing 803-4385050 and DRN 4385050-C6, using SAE-AMS-6931 or centrifugally cast 6AL-4V, ASTM-B367, Grade C-5 material, with mechanical properties as specified.
- Two Mating Seats (piece 9), made from MD71-GG Mearthane (Graphite Filled Urethane), exclusively manufactured by Mearthane Products Inc., Cranston, RI, and meeting specified ASTM test properties.
All components must conform to the referenced drawings and specifications, with additional requirements for hydrostatic or dye penetrant testing, non-destructive testing for welds, and strict pressure and time tolerances for testing. Teflon coating of the ball must be performed per specified Chemours (formerly DuPont) coatings and relevant drawing notes.
**Quality Assurance and Certification**
Given the critical safety nature of the item, the contract invokes comprehensive quality assurance and traceability requirements:
- Contractors must maintain a quality system compliant with ISO-9001 (or MIL-I-45208 as an alternate), with calibration systems per ISO-10012 or ANSI-Z540.3/ISO-17025.
- All material must be traceable to certification test reports, with permanent marking requirements for traceability.
- Certificates of Compliance (C of C) are mandatory, certifying full compliance with all contract requirements, including all invoked specifications and drawings.
- Test certifications, including hydrostatic, dye penetrant, and non-destructive test results, must be provided, referencing the applicable standards and acceptance criteria.
- Certification data must be submitted to Portsmouth Naval Shipyard (DODAAC N50286) for review and acceptance prior to shipment, via the Wide Area Work Flow (WAWF) system. No material may be shipped before acceptance is received.
**Security and Special Considerations**
- Access to classified drawings may be required for contract performance. Facility clearance in accordance with FAR 52.204-2 may be necessary upon award.
- Some drawings and technical data are designated NOFORN and/or contain Naval Nuclear Propulsion Information. Contractors must follow specified procedures to request access, including submission of a security agreement form.
- The contract is a "DO" rated order under the Defense Priorities and Allocations System (DPAS), indicating priority for national defense use.
- Mercury and mercury-containing compounds are strictly prohibited in all supplied materials.
**Contract Administration and Communication**
- All contractual documents are considered issued when transmitted by mail, facsimile, or electronic means, with government acceptance of the contractor’s proposal constituting bilateral agreement.
- The contract requires the use of the Navy’s Workflow Pro (WFP) Mod Assist Module for contract administration.
- The primary point of contact for this solicitation is Nathaniel Ventura, reachable at 929-602-9222 or [email protected]. For WAWF notifications, use [email protected].
**Applicable Standards and Documentation**
The solicitation references a comprehensive list of applicable military, federal, and industry standards, including but not limited to:
- ANSI/ASQ Z1.4, ASTM-B367, MIL-STD-792, MIL-STD-2035, SAE AMS 6931, ISO 9001, ISO 10012, ISO/IEC 17025, MIL-I-45208, MIL-STD-45662, ANSI/NCSL Z540.3, and various NAVSEA and NAVORD documents.
- Contractors are responsible for obtaining and adhering to all referenced documents and drawings.
**Contract Lifecycle Considerations**
Throughout the contract lifecycle, the following elements remain constant:
- The requirement for strict adherence to all technical, quality, and traceability requirements.
- The need for robust documentation, certification, and government review prior to shipment.
- The security and handling protocols for classified and NOFORN information.
- The application of DPAS priority rating and small business set-aside status.
**Summary for Contractors**
This opportunity is best suited for small business manufacturers with demonstrated experience in producing high-reliability, traceable, and quality-assured valve components for naval or similar critical applications. Contractors must have robust quality systems, the ability to manage and document traceability and certification requirements, and the capability to handle classified and export-controlled technical data. The contract’s requirements for material control, inspection, and certification are extensive and non-negotiable, reflecting the critical safety function of the supplied parts.
Interested parties should review the full solicitation and referenced documents, ensure compliance with all requirements, and direct any questions or requests for drawing access to the designated point of contact. The solicitation and additional details are available at: https://sam.gov/opp/b547990adef446f8b322ce74687ba49e/view.
Response deadline: August 5, 2026, 20:05.