On-Call Airfield Runway Friction Testing Services - BPA
Key Dates
Due Date
-
Posted Date
-
Agency & Value
Agency
FA3099 47 CONF CC
Contract Value
Not provided
Codes & Classification
Solicitation Number
FA3099-26-Q-1010
NAICS
237310 - Highway, Street, and Bridge Construction
Classification Code
H217
Additional Details
Documents3
The Department of the Air Force, through the 47th Contracting Flight (FA3099 47 CONF CC), has issued a solicitation for the establishment of a Blanket Purchase Agreement (BPA) to provide on-call airfield runway friction testing services at Laughlin Air Force Base (AFB), Texas, and Spofford Auxiliary Airfield. This procurement is conducted under the Revolutionary FAR Overhaul (RFO) Part 12 and is set aside exclusively for small businesses under NAICS code 237310 (Highway, Street, and Bridge Construction), with a small business size standard of $19.0 million. The Product Service Code (PSC) associated with this requirement is H217—Equipment and Materials Testing for Aircraft Launching, Landing, and Ground Handling Equipment.
**Purpose and Scope**
The primary objective of this BPA is to ensure the safe operation of airfield runways by providing timely, as-needed friction testing services. The contractor will be responsible for conducting friction testing on three runways at Laughlin AFB (13L/31R, 13C/31C, 13R/31L) and one runway at Spofford Auxiliary Airfield (13/31). These services are critical for maintaining runway safety, identifying maintenance needs, and ensuring compliance with Federal Aviation Administration (FAA) and Air Force standards.
**Key Requirements and Deliverables**
Contractors are required to furnish all necessary personnel, equipment, tools, materials, supervision, and other items to perform runway friction testing in accordance with the attached Performance Work Statement (PWS). Key technical requirements include:
- Use of FAA-approved Continuous Friction Measuring Equipment (CFME).
- Compliance with FAA Advisory Circular 150/5320-12C and applicable ASTM standards (e.g., ASTM E274, E1551).
- Testing must be conducted under wet conditions, with controlled water depth as specified in the standards.
- Completion of all testing within 72 hours of airfield access approval, during non-flying hours.
- Submission of timely, formal reports detailing friction testing results and maintenance recommendations, including rubber removal needs.
The BPA will allow the government to issue firm-fixed-price orders for friction testing services on an as-needed basis. Pricing must be provided per call/order and will be updated annually. The government will only pay for services ordered via firm-fixed-price calls placed against the BPA.
**Period of Performance and Ordering**
The BPA will have a base period of 12 months, with up to four (4) one-year option periods, allowing for a potential total period of performance of five years. Each individual order under the BPA will not exceed the Simplified Acquisition Threshold (SAT) of $350,000. Only authorized government representatives will be permitted to place orders under the BPA, and a list of these personnel will be provided upon award.
**Evaluation Criteria**
Award will be made to the responsible offeror whose quote is determined to be most advantageous to the government, considering price and other factors. Price is the most important evaluation factor, followed by technical approach. Technical proposals will be evaluated on the following subfactors:
1. Understanding of the requirements and compliance with FAA and ASTM standards.
2. Evidence of FAA-approved equipment and personnel certifications.
3. Ability to complete testing within the required timeframe and coordinate with Airfield Management and ATC.
4. Quality control measures and procedures for submitting formal test reports.
**Submission Instructions**
Interested small businesses must submit their quotes via email to both SSgt Ian Monis ([email protected]) and Mr. Jesus Valdez ([email protected]) no later than 09 April 2026, 5:00PM (CDT). Technical proposals are limited to 10 pages (excluding cover letter) and must address all evaluation subfactors. Price quotes should include a breakdown of costs per order/call and any additional costs, such as mobilization/demobilization.
An optional site visit is scheduled for 03 April 2026 at 3:00PM (CDT). Interested offerors must RSVP by 02 April 2026 at 5:00PM (CDT). All questions related to the solicitation are due by 5:00PM (CDT) on 06 April 2026, or one business day after the site visit if held.
**Contract Terms and Special Considerations**
This acquisition is a 100% Small Business Set-Aside. The BPA is subject to the availability of funds; the government reserves the right to cancel the solicitation without obligation to compensate offerors for submission costs. The solicitation incorporates a comprehensive set of FAR, DFARS, and RFO clauses and provisions, including those related to small business representation, labor standards, electronic invoicing (Wide Area WorkFlow), and other standard federal contract requirements.
**Location and Points of Contact**
- **Place of Performance:** Laughlin AFB, Texas, and Spofford Auxiliary Airfield, Texas, USA.
- **Contracting Entity:** FA3099 47 CONF CC, Department of the Air Force.
- **Primary Contact:** Jesus B. Valdez, Contracting Officer, [email protected], 830-298-5175.
- **Secondary Contact:** SSgt Ian Monis, [email protected], 830-298-4190.
**Attachments**
- Attachment 1: Performance Work Statement (PWS) for Friction Testing Services.
- Attachment 2: Wage Determination 2015-5303 Rev. 30, 03 Dec 2025.
- Attachment 3: Vendor Questions and Answers (added via Amendment 01).
**Ombudsman**
An ombudsman has been appointed to facilitate the resolution of concerns from offerors and potential offerors. Contact information for the ombudsman is available in the solicitation; however, parties must first attempt to resolve issues with the contracting officer.
**Summary**
This BPA represents a recurring opportunity for qualified small businesses specializing in airfield friction testing to support the operational safety of Laughlin AFB and Spofford Auxiliary Airfield. Contractors must demonstrate technical expertise, compliance with FAA and ASTM standards, and the ability to deliver timely, high-quality services under a firm-fixed-price structure. The BPA framework provides flexibility for the government to order services as needed, with clear expectations for performance, reporting, and coordination.
Interested parties are encouraged to review the full solicitation, PWS, and attachments, and to contact the designated contracting officials for further information or clarification.