PARTS KIT,BALL VALV
Key Dates
Due Date
-
Posted Date
-
Agency & Value
Agency
NAVSUP WEAPON SYSTEMS SUPPORT MECH
Contract Value
Not provided
Codes & Classification
Solicitation Number
N0010426QNB49
NAICS
332919 - Other Metal Valve and Pipe Fitting Manufacturing
Classification Code
4820
Additional Details
Documents1
The Department of the Navy, through NAVSUP Weapon Systems Support Mechanicsburg (NAVSUP WSS MECH), has issued a solicitation (Procurement Identifier: N0010426QNB49) for the supply of a Parts Kit for a 5-inch Ball Valve. This procurement is classified under NAICS Code 332919 (Other Metal Valve and Pipe Fitting Manufacturing) and Product Service Code 4820, reflecting its focus on specialized shipboard valve components. The solicitation is a Total Small Business Set-Aside, inviting qualified small business contractors to participate.
**Purpose and Scope**
The primary objective of this procurement is to acquire a Parts Kit consisting of one Ball (Find No. 39) and two matching Seats (Find No. 28), manufactured in strict accordance with Naval Sea Systems Command Drawing 801-6404739 and related specifications. These components are designated as SPECIAL EMPHASIS material, meaning they are critical to the safe and reliable operation of vital shipboard systems. The use of incorrect or defective material could result in catastrophic failure, serious injury, or loss of shipboard functionality, underscoring the importance of rigorous quality assurance and traceability throughout the contract lifecycle.
**Key Requirements and Deliverables**
Contractors are required to deliver a kit containing:
- One Ball, Find No. 39, fabricated from SAE-AMS-6931 or centrifugally cast 6AL-4V titanium (ASTM-B367, Grade C-5), with mechanical properties as specified in supplementary requirements and applicable drawings.
- Two Seats, Find No. 28, made from Torlon 4503, 4203, or 4203L (unfilled polyamide-imide) per Electric Boat Specification 4147, with a Certificate of Compliance required.
The ball must undergo hydrostatic testing (30 minutes at confidential pressures per Drawing 830-6404016) or, alternatively, dye penetrant inspection and ultrasonic testing as specified. All testing certifications must reference the applicable standards and acceptance criteria. Non-destructive testing, weld repair, and production welds must comply with relevant fabrication specifications and be documented.
Additional requirements include:
- Pressure and time tolerances for testing, as specified in the contract or default values.
- Surface waviness and roughness limits for sealing areas.
- Teflon coating of the ball per specified Chemours Company (formerly DuPont) products and drawing notes.
- Permanent traceability marking on all components, with specific marking locations and methods detailed for both metallic and non-metallic parts.
- Configuration control, including submission of Engineering Change Proposals (ECPs) for any modifications affecting form, fit, function, or interface parameters.
- Comprehensive certification and traceability documentation, including Certificates of Compliance, material test reports, and weld filler metal certifications.
**Quality Assurance and Inspection**
The contract invokes higher-level quality requirements, including ISO-9001 (or MIL-I-45208 as an alternate), with calibration systems per ISO-10012 or ANSI-Z540.3/ISO-17025. Contractors must maintain documented quality systems subject to government audit and provide inspection system procedures prior to award. Government Quality Assurance will be performed at the source, and any changes to place of performance require contracting officer approval.
Inspection and acceptance will be conducted by Portsmouth Naval Shipyard (Ship to: N50286, Inspect by: N39040, Accept by: N39040), with certification documentation submitted via Wide Area Work Flow (WAWF) and email notification to [email protected]. No material may be shipped prior to receipt of government acceptance.
Sampling plans for inspection are based on applicable military or federal standards, with zero defects required for lot acceptance. All material and certification data must be 100% inspected for completeness, legibility, and traceability.
**Contracting Entity and Contact Information**
- Contracting Entity: NAVSUP Weapon Systems Support Mechanicsburg (NAVSUP WSS MECH)
- Department: Department of Defense, Department of the Navy
- Primary Contact: Zachary R. Morrill, Telephone: 717-605-1552, Email: [email protected]
- Notice URL: [SAM.gov Opportunity](https://sam.gov/opp/cc8f06df69f44469881bf3d5643beeb0/view)
**Procurement Type and Special Considerations**
This is a fixed-price solicitation, issued bilaterally and requiring written contractor acceptance. The contract is DO certified for national defense under the Defense Priorities and Allocations System (DPAS), reflecting its criticality to emergency preparedness and energy program use. The procurement is a Total Small Business Set-Aside, with requirements for small business program representations and subcontracting plans.
Special considerations include:
- Access to confidential and controlled drawings, requiring authorized clearance and compliance with distribution statements.
- Strict prohibition of mercury and mercury-containing compounds.
- Adherence to NAVSEA and NAVSHIPS requirements for critical safety items (CSI) and Level I/SUBSAFE material.
- Rigorous material handling, traceability, and certification processes, including for subcontracted operations.
**Constant Elements Throughout Contract Lifecycle**
Throughout the contract, the following elements remain constant:
- The critical safety designation and associated quality assurance requirements.
- The need for traceability and certification of all materials and processes.
- Government source inspection and acceptance procedures.
- Configuration control and documentation requirements.
- Compliance with all referenced standards, specifications, and drawings.
**Summary for Contractors**
Contractors considering this opportunity should possess demonstrated expertise in manufacturing high-precision, safety-critical valve components for naval applications, with robust quality assurance systems and experience in traceability, certification, and government inspection protocols. The solicitation demands strict adherence to technical specifications, material standards, and documentation requirements, with no tolerance for nonconformance. The contract is well-suited for small businesses with established capabilities in metal valve and pipe fitting manufacturing, particularly those familiar with Navy shipboard systems and critical safety item protocols.
Interested parties should review the solicitation in detail, ensure compliance with all requirements, and direct any questions or requests for drawing access to the primary contact listed above. Responses are due by October 30, 2026.