PARTS KIT,BALL VALV
Key Dates
Due Date
-
Posted Date
-
Agency & Value
Agency
NAVSUP WEAPON SYSTEMS SUPPORT MECH
Contract Value
Not provided
Codes & Classification
Solicitation Number
N0010426QZA98
NAICS
332919 - Other Metal Valve and Pipe Fitting Manufacturing
Classification Code
4820
Additional Details
The Department of the Navy, through the Naval Supply Systems Command (NAVSUP) Weapon Systems Support office in Mechanicsburg, PA, has issued a solicitation (N0010426QZA98) for the procurement of a specialized parts kit for a 2-1/2 inch ball valve. This kit is intended for use in critical shipboard systems, where the integrity and reliability of components are paramount due to the potential for catastrophic failure, serious injury, or loss of vital ship functions should incorrect or defective materials be used. As such, the material is designated as SPECIAL EMPHASIS (Level I, Scope of Certification, or Quality Assured), invoking stringent control and certification procedures.
**Purpose and Scope**
The primary objective of this procurement is to acquire a parts kit comprising one ball (piece 4) and two mating seats (piece 23), manufactured in accordance with Marotta Scientific Controls, Inc. drawing 234648 (CAGE 99657, Rev R3, Distribution Code B). The kit is to be used in a crucial shipboard application, necessitating adherence to rigorous quality, traceability, and certification standards to ensure the safety and operational readiness of naval vessels.
**Key Requirements and Deliverables**
- **Materials and Certification**:
- The ball (item 4) must be fabricated from SAE AMS-QQ-S-763, Class 304, Condition A stainless steel, and Teflon coated per specified Chemours (formerly DuPont) coatings. Hard chrome plating is expressly prohibited.
- The seats (item 23) must be made from either Torlon 4503, 4203, or 4203L (unfilled polyamide-imide) per Electric Boat Specification 4147, or Ultem 1000 (unreinforced polyetherimide) meeting defined ASTM property requirements. Only one material type may be used per contract lot; mixing is not permitted.
- Quantitative chemical and mechanical analysis is required for the ball, and a certificate of compliance is required for the seat material.
- All materials must be mercury-free and must not come into contact with mercury or mercury-containing compounds.
- **Testing and Inspection**:
- Intergranular corrosion testing is required for the ball material prior to fabrication.
- Non-destructive testing (NDT) is required for any weld repairs or production welds, in accordance with applicable fabrication specifications.
- Surface waviness of the ball’s sealing area must not exceed 0.0005 inches per inch of spherical surface, and must be verified prior to Teflon coating.
- Seat stack height must be measured and verified per contract instructions.
- All certification data must be submitted to Portsmouth Naval Shipyard for review and acceptance prior to shipment, using the Wide Area Work Flow (WAWF) system.
- **Traceability and Documentation**:
- Full traceability from raw material to finished component is required, with unique traceability markings on each part, in accordance with MIL-STD-792.
- Certification data must include detailed test results, traceability information, and positive statements of compliance.
- All records must be maintained and made available for government review.
- **Quality Assurance**:
- The contractor must maintain a quality system compliant with ISO 9001 (or MIL-I-45208 as an alternate), with calibration systems per ISO 10012 or ANSI Z540.3/ISO 17025.
- Government Quality Assurance (GQA) at source is required, and the place of performance may not be changed without authorization.
- Subcontractor quality and traceability controls must be enforced by the prime contractor.
- **Configuration and Change Control**:
- The contractor is responsible for maintaining configuration control and must submit Engineering Change Proposals (ECPs) for any modifications affecting form, fit, function, or interface.
- All waivers and deviations require prior government approval and must be classified as critical, major, or minor.
- **Packaging and Marking**:
- Preservation, packaging, and marking must comply with MIL-STD-2073 and contract-specific requirements.
**Contracting Entity and Contact Information**
- **Contracting Office**: NAVSUP Weapon Systems Support (NAVSUP-WSS), Mechanicsburg, PA
- **Department/Agency**: Department of Defense, Department of the Navy
- **Primary Contact**: Kathryn E. Skutlin, Telephone: 717-605-2430, Email: [email protected]
**Classification and Codes**
- **NAICS Code**: 332919 (Other Metal Valve and Pipe Fitting Manufacturing)
- **Product Service Code (PSC)**: 4820 (Valves, Nonpowered)
**Procurement Type and Special Considerations**
- This solicitation is issued under emergency acquisition flexibilities and is subject to Defense Priorities and Allocations System (DPAS) "DO" rating for national defense use.
- The award will be bilateral, requiring written contractor acceptance.
- Only sources with an acceptable Quality Assurance Manual are eligible for award.
- The procurement is not explicitly set aside for small business, but compliance with the Small Business Subcontracting Plan (DoD contracts) is required.
- Access to drawings, if not provided, must be requested via SAM.gov, including the contractor’s CAGE code.
**Constant Elements Over Contract Lifecycle**
- The requirement for strict material traceability, certification, and compliance with all specified standards and drawings will remain in force throughout the contract.
- The need for government source inspection, configuration control, and adherence to quality assurance protocols will persist for all deliveries.
- All documentation, certification, and data submission requirements, including the use of WAWF and notification to Portsmouth Naval Shipyard, are integral to contract performance.
**Summary for Contractors**
This opportunity is highly specialized and best suited for contractors with demonstrated experience in manufacturing and certifying critical safety items for naval or similar high-reliability applications. Prospective offerors must possess robust quality management systems, the ability to maintain full material traceability, and the capacity to comply with detailed testing, certification, and documentation requirements. The contract’s criticality, emergency acquisition status, and DPAS rating underscore the importance of timely, precise, and fully compliant performance.
Interested parties should review the full solicitation and referenced documents for complete technical and quality requirements. All inquiries and requests for access to controlled drawings should be directed to the contracting officer listed above.
For further details and to access the solicitation, visit: [SAM.gov Opportunity Link](https://sam.gov/opp/0cbeab71ad76437eb16a361bb36f7cfb/view).