MOTOR UNIT ASSEMBLY

Key Dates
Due Date

-

Posted Date

-

Agency & Value
Agency

DLA AVIATION AT PHILADELPHIA, PA

Contract Value

Not provided

Codes & Classification
Solicitation Number

SPRPA126RYB77

NAICS

335312 - Motor and Generator Manufacturing

Classification Code

6105

Additional Details
Set Aside

None

Place of Performance

-

SourceSAM
The Defense Logistics Agency (DLA) Aviation at Philadelphia, PA, on behalf of the Department of Defense, has issued a solicitation (SPRPA126RYB77) for the procurement of a Motor Unit Assembly, classified under NAICS code 335312 (Motor and Generator Manufacturing) and Product Service Code 6105. This procurement is designated as a Foreign Military Sales (FMS) new spares requirement and is being conducted under Emergency Acquisition Flexibilities (EAF), formerly known as Special Emergency Procurement Authority (SEPA). **Purpose and Scope** The Motor Unit Assembly is a critical component intended for use in shipboard systems that enable the launch and/or recovery of aircraft. Due to the essential nature of this application, the item is classified as a Critical Safety Item (CSI). The procurement aims to ensure the delivery of high-quality, reliable assemblies that meet stringent safety and performance standards, thereby supporting vital defense operations and minimizing the risk of system failure, personnel injury, or loss of assets. **Key Requirements and Objectives** - **Engineering Source Approval:** Only companies with prior engineering source approval from the Naval Air Systems Command (NAVAIR) are eligible for award. New manufacturers may submit a Source Approval Request, including comprehensive documentation of similar production experience, process sheets, purchase orders, comparative analyses, and inspection methods, by the solicitation closing date. - **Quality Assurance:** The solicitation mandates compliance with ISO 9001 or equivalent quality standards. A pre-award survey and post-award conference may be required for new manufacturers, with ongoing quality surveillance by NAWCAD Lakehurst (NAWCADLKE) and the Defense Contract Management Agency (DCMA). - **Inspection and Testing:** The contract requires rigorous inspection protocols, including 100% inspection of critical characteristics, plating, hardness, and non-destructive testing (NDT). NDT must be performed by NADCAP-accredited or ISO 17025-accredited laboratories. First Article Testing (FAT) is required unless waived for previously approved sources, with detailed reporting and government witness requirements. - **Traceability and Marking:** Contractors must implement a system for traceability of individual piece parts, with markings in accordance with MIL-STD-130. Certified ALRE CSI parts must be marked with a Material Identification Code (MIC) as directed by NAWCADLKE QA. - **Manufacturing and Process Controls:** The contractor is responsible for all manufacturing aids, tooling, and test equipment. Critical manufacturing processes such as heat treatment, welding, and material processing must comply with specified NAVSEA and MIL-STD requirements, with supporting documentation and certifications required for welders and processes. - **Data and Documentation:** Extensive data submission is required, including material properties, dimensional inspections, shock and vibration test results, torque settings, assembly verification, and inspection/certification data. All records must be maintained for seven years and provided to the ALRE Cognizant Technical Authority. - **Packaging:** Packaging must comply with MIL-STD-2073. **Expected Deliverables** - Motor Unit Assemblies manufactured, tested, and inspected per NAWCAD Lakehurst drawing 623619 (latest revision) and all referenced specifications. - First Article Test unit and report, unless FAT is waived. - Complete inspection and certification data, including evidence of compliance with all technical and quality requirements. - Ongoing production units meeting all contract specifications, with mandatory source and final inspections. **Contracting Entity and Contact Information** - **Contracting Office:** DLA Aviation at Philadelphia, PA - **Department:** Department of Defense, Defense Logistics Agency - **Primary Contact:** Thomas Kuhnle, Telephone: 215-737-4024, Email: [email protected] - **NAICS Code:** 335312 (Motor and Generator Manufacturing) - **PSC:** 6105 **Location and Oversight** - Technical oversight and quality assurance are provided by NAWCAD Lakehurst, located at Joint Base MDL, NJ 08733-5000. Multiple NAWCADLKE codes and building addresses are specified for submission of documentation and coordination of inspections. **Procurement Type and Special Considerations** - This is a solicitation for supplies under a fixed-price contract structure. - The procurement is not set aside for small business; it is open to all qualified and approved sources. - Emergency Acquisition Flexibilities apply, expediting certain processes and requirements. - No government-furnished drawings or tooling will be provided; contractors must be fully self-sufficient. - Compliance with Buy American and Free Trade Agreements is required, with relevant certifications to be submitted. - The solicitation incorporates numerous FAR, DFARS, and DLAD clauses, including those related to supply chain security, equal opportunity, and warranty provisions. **Constant Elements Over Contract Lifecycle** - The critical safety classification and associated quality and inspection requirements will remain in force throughout the contract. - Source approval and traceability requirements are enduring and non-negotiable. - All manufacturing, inspection, and documentation standards will be consistently enforced for all production lots. - The requirement for government and technical authority oversight, including advance notification for inspections and record retention, will persist for the duration of the contract and beyond. **Summary for Contractors** This opportunity is suited for contractors with demonstrated experience in manufacturing flight-critical, high-reliability motor assemblies for military or aerospace applications. Prospective offerors must have robust quality systems, the ability to comply with stringent technical and process controls, and the capacity to support comprehensive inspection and documentation requirements. Only sources with NAVAIR engineering approval or those able to secure such approval through a detailed submission process will be considered. The solicitation’s critical safety designation, extensive oversight, and documentation requirements underscore the importance of proven capability, traceability, and compliance with all specified standards. Interested parties should review the full solicitation and associated drawings and specifications, and direct any questions or submissions to the contracting officer listed above. The response deadline is April 3, 2026. For more information and to access the solicitation, visit: [SAM.gov Opportunity](https://sam.gov/opp/d17f9ef2fc024a52a9754a5d7928173b/view)