6680--Loch Raven Boiler Fuel Reserve Tank

Key Dates
Due Date

-

Posted Date

-

Agency & Value
Agency

245-NETWORK CONTRACT OFFICE 5 (36C245)

Contract Value

Not provided

Codes & Classification
Solicitation Number

36C24526Q0377

NAICS

333914 - Measuring, Dispensing, and Other Pumping Equipment Manufacturing

Classification Code

6680

Additional Details
Set Aside

SBA

Place of Performance

UNITED STATES

SourceSAM
The Department of Veterans Affairs, through its 245-Network Contract Office 5, has issued a combined synopsis/solicitation for the procurement and installation of a 6,000-gallon reserve fuel tank at the Loch Raven VA property. This project is designed to enhance the facility’s boiler operations by supplementing the existing reserve fuel capacity, thereby ensuring reliable and continuous service. The scope of work encompasses the delivery, installation, and integration of a new UL 142 double-wall steel, 6,000-gallon, 8-foot diameter, skid-mounted aboveground storage tank (AST). The tank will be installed on the existing asphalt drive lane adjacent to the emergency generator and will include all necessary components such as venting, a manway lid, spill bucket, overfill control valve, stick port, visual level gauge, and anti-siphon control. The tank will be finished in white and appropriately labeled and signed to meet regulatory requirements. A key amendment to the solicitation specifies that the contractor must provide 1-inch thick steel road plates to be placed under the tank supports, with the plates extending approximately 2 feet radially from the supports to effectively distribute the load on the asphalt surface. The contractor will also be responsible for installing 1-inch supply and return fuel piping, complete with all required valves and fittings, and for connecting this piping to the existing infrastructure at the sump outside the building. Proper support and secure installation of the piping are essential. To ensure safety and security, the project includes the installation of six concrete traffic barriers around the tank, spaced to allow access, as well as a 6-foot construction fence with an access section. Integration with the facility’s existing Veeder Root monitoring system is required, including the installation of a refurbished probe with a diesel and water float kit, all necessary wiring and conduit per manufacturer and National Electric Code standards, and an interstitial sensor in the tank’s secondary containment. The Veeder Root console must be programmed to monitor the new equipment and to activate an overfill alarm at 90% tank capacity. Deliverables for this contract include the fully installed and operational 6,000-gallon UL 142 double-wall steel tank with all required fittings, secure fencing and barriers, installed and connected fuel piping, and a fully integrated monitoring system with overfill protection. The contractor is responsible for all aspects of delivery, installation, and integration, ensuring compliance with all relevant regulations and safety standards. The tank will be installed directly on the existing asphalt driveway, with the specified steel road plates to ensure proper load distribution. This procurement is classified under NAICS code 333914 (Measuring, Dispensing, and Other Pumping Equipment Manufacturing) and Product Service Code 6680. The opportunity is set aside for SBA participants. All vendors must be registered in SAM.gov and must submit a letter of authorization to distribute supplies on manufacturer letterhead, along with a completed BAA certificate. Proposals will be evaluated based on best value, delivery lead times, and compliance with submission requirements. The place of performance is within the United States. The primary point of contact for this solicitation is Theresa Thomas, who can be reached at [email protected]. Interested parties should refer to SAM.gov Opportunity ID ba0e4bfdb51e4fd69ff890acd65c8239 for further details and attachments. The solicitation remains active, with responses due by June 4, 2026. This opportunity represents a comprehensive project requiring expertise in fuel storage tank installation, piping, safety barrier construction, and integration with electronic monitoring systems, all performed in accordance with federal and industry standards.
Documents8