VALVE,GLOBE

Key Dates
Due Date

-

Posted Date

-

Agency & Value
Agency

NAVSUP WEAPON SYSTEMS SUPPORT MECH

Contract Value

Not provided

Codes & Classification
Solicitation Number

N0010426QFD02

NAICS

332919 - Other Metal Valve and Pipe Fitting Manufacturing

Classification Code

4820

Additional Details
Set Aside

None

Place of Performance

-

SourceSAM
The Department of the Navy, through NAVSUP Weapon Systems Support (NAVSUP WSS) Mechanicsburg, has issued a solicitation for the procurement of a critical shipboard component: a 3-inch, 1000 PSI buttweld globe valve designed for flow control in seawater service. This procurement, identified by solicitation number N0010426QFD02, is classified under NAICS code 332919 (Other Metal Valve and Pipe Fitting Manufacturing) and Product Service Code 4820 (Valves, Nonpowered). The solicitation is open and active, with a closing date extended to April 22, 2026. **Purpose and Scope** The primary purpose of this procurement is to supply a valve that will be integrated into a vital shipboard system. The valve is designated as SPECIAL EMPHASIS material (Level I, Scope of Certification, or Quality Assured), reflecting its criticality: failure or defects could result in serious injury, loss of life, or catastrophic damage to shipboard systems or the vessel itself. As such, the contract invokes rigorous control procedures and quality assurance requirements to ensure the correct material is received and installed. **Key Requirements and Objectives** The globe valve must be manufactured in strict accordance with NAVSHIPS Drawing 845-2445066, Assembly IRA-1, and Engineering Notice DM118664, with additional requirements and modifications as specified in the solicitation. Contractors must reference Contract Support Library documents (CSD128 and CSD155) for further details on specification revisions and obsoleted items. Material certification and traceability are paramount. Specific parts—including the body, bonnet, stem, stud, self-locking nut, and stem seal retainer—must be fabricated from designated alloys and undergo quantitative chemical and mechanical analysis. Testing certifications are required for weldability, liquid and dye penetrant inspections, pressure tests, quality conformance, ultrasonic inspection, and radiography. Only approved laboratories may perform certain tests, such as the Slow Strain Rate Tensile Test for QQ-N-286 material. The valve assembly must meet precise pressure and time tolerances for testing, as outlined in the contract and referenced drawings. O-ring grooves and sealing surfaces are subject to stringent inspection criteria, and repairs must adhere to specified limits or receive prior approval. Welding and brazing procedures must comply with Navy standards, and repair welding is prohibited on certain materials. Fasteners, particularly K-MONEL types, require specific heat treatment and mechanical property verification. All threads must be cut (not cold-formed) and inspected per FED-STD-H28 or ASME B1 series standards. Component identification must include a CID number, and marking requirements for traceability and material identification are detailed. **Quality Assurance and Deliverables** The contractor must maintain a quality system compliant with ISO-9001 (or MIL-I-45208 as an alternate), with calibration systems per ISO-10012, ANSI-Z540.3, and ISO-17025. The quality system and inspection procedures are subject to government review and audit throughout the contract lifecycle. Suppliers of Level I/SUBSAFE material must submit documented quality system procedures prior to award unless already on file. Inspection and testing records must be comprehensive, traceable, and available for government review. Subcontractor oversight is required, including periodic audits and compliance verification. Receiving inspection, discrepancy reporting, and final inspection procedures are specified, with lot acceptance based on zero defects. Certificates of compliance must be submitted, demonstrating full adherence to contract requirements, traceability, and successful completion of all required tests. Radiography and other non-destructive testing documentation must be provided for Navy acceptance prior to shipment. **Packaging and Marking** Preservation, packaging, packing, and marking must comply with MIL-STD 2073 and contract schedule requirements. Fasteners and assemblies must be marked for traceability, material, and manufacturer identification, with special requirements for self-locking nuts. **Contracting Entity and Contact Information** - Contracting Entity: NAVSUP Weapon Systems Support Mechanicsburg (NAVSUP WSS MECH) - Department: Department of Defense, Department of the Navy - Entity Type: Federal Office - Primary Contact: Scott R. Youngblood - Telephone: 717-605-2379 - Email: [email protected] - Notice URL: [SAM.gov Opportunity](https://sam.gov/opp/0416c2562759439d849d05f8894909fd/view) **Procurement Type and Special Considerations** This is a fixed-price solicitation and is NOT a small business set-aside; all qualified firms, including other-than-small business concerns, are encouraged to submit quotes. The contract will be DO rated under the Defense Priorities and Allocations System (DPAS), certifying its importance for national defense. Past performance will be considered in the evaluation of offers. Drawings and technical data may require access requests via the SAM.gov solicitation page, followed by notification to the primary point of contact. Waivers and deviations must be submitted for approval, and configuration control is maintained by the government. **Constant Elements Throughout Contract Lifecycle** - Strict adherence to Navy and federal specifications, drawings, and quality assurance requirements - Maintenance of material traceability and certification - Compliance with configuration control, marking, and documentation standards - Government oversight, inspection, and audit rights - Submission of certificates of compliance and test results - Packaging and marking per military standards - No use of mercury or mercury-containing compounds **Summary for Contractors** This opportunity is highly specialized and demands robust manufacturing, quality assurance, and documentation capabilities. Contractors must demonstrate experience with critical shipboard components, traceability, and compliance with Navy standards. The scope, requirements, and quality controls are extensive and will remain constant throughout the contract lifecycle, reflecting the critical safety and operational importance of the valve. Interested firms should review all referenced documents, ensure access to required drawings, and be prepared for comprehensive government oversight and documentation requirements. For further information or to request access to technical data, contact Scott R. Youngblood at the provided email or phone number.